Korg ARP 2600 FS Bedienungsanleitung

Korg Synthesizer ARP 2600 FS

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Korg ARP 2600 FS (115 Seiten) in der Kategorie Synthesizer. Dieser Bedienungsanleitung war für 17 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/115
2600 FS
SEMI-MODULAR SYNTHESIZER
EFGSJ 2
Owner’s Manual
Manuel dutilisation
Bedienungsanleitung
Manual del usuario
En
Fr
De
Es
Ja
- 3 -
Owner’s manual
IMPORTANT SAFETY INSTRUCTIONS
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including ampliers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding type plug has two blades and a third grounding prong.
The wide blade or the third prong are provided for your safety. If the provided plug does not t into your
outlet, consult an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
11) Only use attachments/accessories specied by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specied by the manufacturer,
or sold with the apparatus. When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
14) Refer all servicing to qualied service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.
WARNINGThis apparatus shall be connected to a mains socket outlet with a protective earthing connection.
Mains powered apparatus shall not be exposed to dripping or splashing. No objects lled with
liquids, such as vases or drinking glasses, shall be placed on the apparatus.
Turning off the power switch does not completely isolate this product from the power line.
Keep the power plug easily accessible. Do not install this equipment far from a power outlet and/or
power strip.
Do not install this equipment in a conned space such as a box for the conveyance or similar unit.
Excessive sound pressure from earphones and headphones can cause hearing loss.
This apparatus is for moderate climates areas use, not suitable for use in tropical climates countries.
The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers,
table-cloths, curtains, etc.
No nakedame sources, such as lighted candles, should be placed on the apparatus.
The rating label is located on the bottom of the unit.
The lightning ash with arrowhead symbol within an equilateral triangle, is intended to
alert the user to the presence of uninsulated “dangerous voltage” within the products
enclosure that may be of sufcient magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral triangle is intended to aler t the user to the
presence of important operating and maintenance (servicing) instructions in the literature
accompanying the product.
THE FCC REGULATION WARNING (for USA)
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pur-
suant to Par t 15 of the FCC Rules. These limits are designed to provide reasonable protection against harm-
ful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
If items such as cables are included with this equipment, you must use those included items.
Unauthorized changes or modication to this system can void the user’s authority to operate this equipment.
SUPPLIER'S DECLARATION OF CONFORMITY (for USA)
Responsible Party: KORG USA INC.
Address : 316 SOUTH SERVICE ROAD, MELVILLE, NY
Telephone : 1-631-390-6500
Equipment Type : SEMI-MODULAR SYNTHESIZER
Model : ARP2600-FS
This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,and (2) this device must accept any interference re-
ceived, including interference that may cause undesired operation.
Notice regarding disposal (EU only)
When this “crossed-out wheeled bin” symbol is displayed on the product, owner’s manual, battery, or
battery package, it signies that when you wish to dispose of this product, manual, package or battery
you must do so in an approved manner.
Do not discard this product, manual, package or battery along with ordinary household waste. Disposing
in the correct manner will prevent harm to human health and potential damage to the environment. Since
the correct method of disposal will depend on the applicable laws and regulations in your locality, please
contact your local administrative body for details. If the battery contains heavy metals in excess of the
regulated amount, a chemical symbol is displayed below the “crossed-out wheeled bin” symbol on the
battery or battery package.
* All product names and company names are the trademarks or registered trademarks of their respective owners.
ARP 2600 FS
- 4 -
Introduction to the ARP 2600 FS
About the ARP 2600 synthesizer
The ARP 2600 was manufactured and sold from 1971 to 1981, and was a notable
product of ARP Instruments, Inc. Except for the very early models that used a metal
body, the 2600 is well known for its suitcase-style configuration which separated
the synth module from the keyboard module.
In an era when large modular systems were still the mainstream, the ARP 2600
went on sale as a semi-modular synthesizer that could be transported. The main
modules are internally pre-connected so that sound could be immediately produced
without patching, and extremely complex sounds could be designed by patching.
Its wide range of sound design potential meant that the ARP 2600 was used in
recordings by numerous musicians, production of music for films, and in education.
Other notable features were its built-in speakers and spring reverb.
Main Features
ARP 2600 FS
Equipped with VCOs, VCF, and VCA that use the analog circuits of the original
ARP 2600, this instrument provides sound design capabilities far beyond a typical
analog synthesizer, allowing flexible and highly improvisatory synthesis.
The included patch cables allow highly flexible patching. Since each module is internally
connected by default, the unit can also be used without connecting patch cables.
Two types of VCF (early and later models) are provided, and can be selected by a
single switch.
Two types of envelope generators are provided: ADSR type and AR type.
Since an external audio input jack is provided, you can also process sound that is
input externally, such as a guitar or microphone signal.
A USB port and MIDI connectors are provided, allowing the unit to be connected to
a computer or MIDI devices.
ARP 3620 keyboard unit
Equipped with three types of LFO: triangle wave, square wave, and sine wave.
Used in conjunction with the ARP 2600 main unit, this allows production of a
variety of effects such as vibrato and tremolo.
Also provided is an arpeggiator not found on the original, capable of recording and
playing back patterns.
An aftertouch sensor is provided, allowing you to apply vibrato to the sound by
pressing down on the keyboard. Patching allows keyboard pressure to produce a
variety of changes.
Table of Contents
Introduction to
the ARP 2600 FS . . . . . . . . . . . . 4
About the ARP 2600 synthesizer . . . .4
Main Features. . . . . . . . . . . . . . . . . . . . . .4
Block diagram 5 . . . . . . . . . . . . . .
Panel description and
functions . . . . . . . . . . . . . . . . . . 6
Front panel (PREAMPLIFIER,
ENVELOPE FOLLOWER,
RINGMODULATOR section) . . . . . . . .6
Front panel (VCO-1 section) . . . . . . . .7
Front panel (VCO-2 section) . . . . . . . .8
Front panel (VCO-3 section) . . . . . . . .9
Front panel (VCF section) . . . . . . . . . 10
Front panel (ADSR EG/AR EG section)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Front panel (VCA section) . . . . . . . . 12
Front panel (MIXER, REVERB section)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Front panel (NOISE GENERATOR,
VOLTAGE PROCESSORS section) . . 14
Front panel
(SAMPLE & HOLD section) . . . . . . . . 15
Front panel (SPEAKER section L,
SPEAKER section R). . . . . . . . . . . . . . . 16
Side panel L
(MIDI, USB, MODE SWITCH)
Side panel R
(power, main output jacks) . . . . . . . 17
ARP3620 keyboard unit . . . . . . . . . . 18
Getting started 20 . . . . . . . . . . . .
Connections 20 . . . . . . . . . . . . . . . . . . . . .
Turning the power on . . . . . . . . . . . . 21
Turning the power off . . . . . . . . . . . . 21
Auto power-off function . . . . . . . . . 21
Let’s make some sounds 22 . . .
Basic settings 22 . . . . . . . . . . . . . . . . . . . .
Tuning .......................... 22
Arpeggiator settings . . . . . . . . . . . . . 23
Voice assign mode settings . . . . . . . 23
About MIDI 24 . . . . . . . . . . . . . . .
Connecting MIDI devices 24 . . . . . . . . .
Connecting a computer . . . . . . . . . . 24
About the MIDI implementation
chart ............................ 24
Troubleshooting 25 . . . . . . . . . .
Specifications . . . . . . . . . . . . . 25


Produktspezifikationen

Marke: Korg
Kategorie: Synthesizer
Modell: ARP 2600 FS

Brauchst du Hilfe?

Wenn Sie Hilfe mit Korg ARP 2600 FS benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Synthesizer Korg

Bedienungsanleitung Synthesizer

Neueste Bedienungsanleitung für -Kategorien-