König VID-TRANS510KN Bedienungsanleitung

König AV extender VID-TRANS510KN

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für König VID-TRANS510KN (8 Seiten) in der Kategorie AV extender. Dieser Bedienungsanleitung war für 16 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/8
VID-TR ANS 5 1 0 K N
MANUAL (p. 2)
5.8 GHz AV system
MANUAL (p. 5)
Sistema de 5.8 GHz AV
2
ENGLISH
5.8 GHz AV system
Introduction:
The 2.4 GHz frequency band is very busy due to applications like Bluetooth®, WiFi and wireless
networks. Therefore the signals of such equipment is easily distorted. That is why the VID-TRANS510
uses the 5.8 GHz frequency, to avoid any interference between such devices. Enjoy wireless video and
audio in your house. Included: infrared extension for control of connected equipment.
Description transmitter and receiver:
1.
3.
4.
2.
5
.
1. Antenna for sending and receiving
remote control RF signal
2. Channel LED indicator for showing the
operational channel
3. Channel button for setting the channel
4. Remote sensor for receiving the IR
signal of the remote control
5. Directional 5.8GHz antenna for
sending and receiving audio/video
signals
Rear view transmitter:
3
.
2.
1.
4.
1. DC power input (9 VDC)
2. IR cable input
3. AV input (white: audio left, red: audio
right, yellow: video)
4. ON/OFF switch
3
Rear view receiver:
1.
2.
3.
1. DC power input (9 VDC)
2. AV output (white: audio left, red:
audio right, yellow: video)
3. ON/OFF switch
Operation:
1. Connect the transmitter with the AV cable to the output of VCR, DVD or SAT.
2. Connect the receiver with the AV cable to the input of TV, LCD screen or Plasma.
3. Connect the adapter plug of the AC/DC adapter into the transmitter and the receiver and connect
the power plug into a 230 Volt wall outlet. Note: use the provided adapters only.
4. Select on the transmitter and receiver the desired channel with the channel button. Note: In case of
possible distortion, try another channel. For optimum performance, it could be necessary to point
the transmitter and receiver to each other in an imaginary straight line. Or replace the transmitter
and/or receiver a bit, a few centimeters/inches could already be enough to improve the sound and
picture quality. If the reception is perfect, no adjustments are necessary.
5. Turn on the connected equipment and enjoy wireless reception.
Using the remote control feature:
The 5.8 GHz system not only allows you to send audio/video from one area to another, it also gives you
the ability to control the source by using your existing remote control device. It converts the infrared (IR)
signal emitted by your remote control to a a radio frequency (RF) signal in the UHF band at the receiver
and sends it back to the transmitter where the RF signal is converted back to the original IR signal and
beamed to the audio/video source.
Use the IR cable and connect the 2.5mm plug to the input jack on the back of the transmitter (IR). Place
the IR sensor on the front of the display from the equipment that need to be controlled. It’s important to
place the IR sensor as close as possible to the IR sensor, which is behind the display, of the equipment.


Produktspezifikationen

Marke: König
Kategorie: AV extender
Modell: VID-TRANS510KN

Brauchst du Hilfe?

Wenn Sie Hilfe mit König VID-TRANS510KN benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung AV extender König

Bedienungsanleitung AV extender

Neueste Bedienungsanleitung für -Kategorien-