König SEC-ALARM200 Bedienungsanleitung
König
Alarm ringer
SEC-ALARM200
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für König SEC-ALARM200 (72 Seiten) in der Kategorie Alarm ringer. Dieser Bedienungsanleitung war für 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/72
2013-10-22
SEC-ALARM200
MANUAL (p. 2)
WIRELESS ALARM SYSTEM
ANLEITUNG (S. 6)
DRAHTLOSES ALARMSYSTEM
MODE D’EMPLOI (p. 10)
SYSTEME D'ALARME SANS FIL
GEBRUIKSAANWIJZING (p. 14)
DRAADLOOS ALARMSYSTEEM
MANUALE (p. 18)
SISTEMA D'ALLARME SENZA FILI
MANUAL DE USO (p. 22)
SISTEMA DE ALARMA INALÁMBRICA
MANUAL (p. 27)
SISTEMA DE ALARME SEM FIOS
HASZNÁLATI ÚTMUTATÓ (o. 31.)
VEZETÉK NÉLKÜLI RIASZTÓRENDSZER
KÄYTTÖOHJE (s. 35)
LANGATON HÄLYTYSJÄRJESTELMÄ
BRUKSANVISNING (s. 39)
TRÅDLÖST ALARMSYSTEM
NÁVOD K POUŽITÍ (s. 43)
BEZDRÁTOVÝ POPLAŠNÝ SYSTÉM
MANUAL DE UTILIZARE (p. 47)
SISTEM DE ALARMĂ WIRELESS
ΕΓΧΕΙΡΙΔΙΟ XPHΣ ΣH (σελ. 51)
ΑΣΥΡΜΑΤΟ ΣΥΣΤΗΜΑ ΣΥΝΑΓΕΡΜΟΥ
BRUGERVEJLEDNING (s. 55)
TRÅDLØST ALARMSYSTEM
VEILEDNING (s. 60)
TRÅDLØST ALARMSYSTEM
ИНСТРУКЦИЯ (стр. 64)
БЕСПРОВОДНАЯ СИСТЕМА
СИГНАЛИЗАЦИИ
KILAVUZ (s. 69)
KABLOSUZ ALARM Sİ İSTEM
2
ENGLISH
WIRELESS ALARM SYSTEM
QUICK SETUP GUIDE
Functions include:
Alert – Advises you to what is happening around the house.
Alarm – Protects your home / assets while you are away.
Communication – Calls you during an emergency, you can also call in to perform a variety of
operations.
This Quick Guide will show you how to setup the system and use basic functions. It is strongly
recommended that you refer to the User’s Instructions for full illustrations on how the system should be
installed and operated.
Installation of the Control Panel
1. Plug in the adapter to a wall socket
and the other end should be
connected to the socket on the
Control Panel marked “DC 12 V”. You
should hear 3 beeps.
2. Remove the screw on the battery
cover and insert 4 pcs of AAA
batteries into the battery holder.
Tighten the screw afterwards.
3. Plug in a phone line from the “LINE”
socket to the phone outlet on the
wall.
4. If you want to connect a telephone to
the Control Panel, the phone can be
plugged into the socket marked
“PHONE” on the Control Panel.
3
Installation of Sensors - Batteries
Insert batteries in all the
sensors and mount them
accordingly. Please refer to the
User’s Instructions for details
on how to install the Motion
Sensor and Door / Window
Sensor.
Remove the yellow
protective tag from
the sensors.
Insert 9V alkaline
battery in the sensor
Operation - Alert Mode
All the sensors are preprogrammed at the factory, so the
Control Panel can communicate with these sensors after the
batteries are installed properly.
Door/Window Sensor
Activate the Door / Window Sensor, you will hear continuous
beeping, one beep at a time, indicating zone 1 sensor is
activated. Activate the other Door / Window Sensor, you will
hear continuous beeping, two beeps at a time, indicating
zone 2 sensor is activated.
Notes: The door/Window Sensor is factory default in zone 1
and zone 2.
Activate the sensor
by opening the door,
you will hear voice
announcement and
continuous beeping.
Close the door, and
beeping stop.
Motion Sensor
To perform the walk test, its necessary to enable the Alert Zone (Bypass Zone) feature in the Control
Panel. After the walk test, it needs to disable this alert zone feature otherwise it will bypass the signal in
the alarm mode.
To enable the alert zone feature:
1. Press [PROG] + MPIN [factory default 1 2 3 4].
2. Press [8] to select Alert Zone.
3. Press [8] to enable for zone 3. The zone 3 LED will stay ON after selected.
4. Press [PROG] when finished.
Walk in front of the Motion Sensor, you will hear the continuous beeping from the Control Panel.
Beeping will continue for approx. 20 seconds for every motion detected.
To disable the alert zone feature:
1. Press [PROG] + MPIN [factory default 1 2 3 4].
2. Press [8] to select Alert Zone.
3. Press [3] to disable for zone 3. The zone 3 LED will flash after selected.
4. Press [PROG] when finished.
Notes:
1) The Motion Sensor is factory default in zone 3.
2) If the Motion Sensor doesn’t respond to your movement, try not to move in front of the sensor for
20 seconds (i.e. no motion is detected in 20 seconds), then walk again. The Motion Sensor is
designed to be triggered only if no motion is detected for 20 seconds.
Program Emergency Phone Number
During an emergency, the Control Panel can call up to 5 phone numbers to inform you about an
emergency situation. There are 5 phone memories, it will first call phone memory 1, then phone
memory 2, etc. It will call phone memory 5 last. Each phone number can have a redial count up to
Beep
Produktspezifikationen
| Marke: | König |
| Kategorie: | Alarm ringer |
| Modell: | SEC-ALARM200 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit König SEC-ALARM200 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Alarm ringer König
22 Juli 2024
16 Juli 2024
Bedienungsanleitung Alarm ringer
- Alarm ringer Hama
- Alarm ringer Velleman
- Alarm ringer Beurer
- Alarm ringer Cresta
- Alarm ringer TFA
- Alarm ringer Blaupunkt
- Alarm ringer Lenco
- Alarm ringer Abus
- Alarm ringer Olympia
- Alarm ringer Smartwares
- Alarm ringer Hyundai
- Alarm ringer MT Logic
- Alarm ringer Sencor
- Alarm ringer Globaltronics
- Alarm ringer Monacor
- Alarm ringer HQ
- Alarm ringer X4-Life
- Alarm ringer La Crosse Technology
- Alarm ringer Electia
- Alarm ringer Sonic Alert
- Alarm ringer Dahua Technology
- Alarm ringer Pentatech
- Alarm ringer Valcom
Neueste Bedienungsanleitung für -Kategorien-
6 September 2024
5 September 2024
3 September 2024
3 September 2024
18 August 2024
17 August 2024
17 August 2024
15 August 2024
15 August 2024
15 August 2024