König PA-AMP6000-KN Bedienungsanleitung

König Empfänger PA-AMP6000-KN

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für König PA-AMP6000-KN (68 Seiten) in der Kategorie Empfänger. Dieser Bedienungsanleitung war für 14 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/68

PA-AMP2400-KN / 4800-KN

PA-AMP6000-KN / 10000-KN

PA-AMP15000-KN / 20000-KN

POWER AMPLIFIERS

PA VERSTÄRKER

AMPLIFICATEURS DE PUISSANCE

VERSTERKERS

AMPLIFICATORI DI POTENZA

AMPLIFICADORES DE POTENCIA

ERŐSÍTŐK

TEHOVAHVISTIMET

EFFEKT FÖRSTÄRKARE

VÝKONOVÉ ZESILOVAČE

AMPLIFICATOARE DE PUTERE

ENGLISH

Introduction:

A semi-professional ampliﬁ er series which ﬁ ts standard 19” rack cabinets. This ampliﬁ er is

ideal for starting DJs, who desire excellent product reliability. A built-in cooler takes care of

good ventilation and a peak level indicator gives control over the output level. For maximum

ﬂ exibility there is a choice of various speaker connections like a lockable SPK connector,

binding posts or XLR.

Important information before use:

• Keep sufﬁ cient space around the ampliﬁ er to allow adequate air circulation. Also when

mounted in a ﬂ ight case, make sure the airﬂ ow is not obstructed.

• Always switch on the ampliﬁ er after switching on the other equipment and always switch

it off before the other equipment is switched off. If possible with the volume controls set at

minimum, this will avoid annoying and sometimes dangerous signal peaks.

• Make sure the ampliﬁ er is switched off when connecting or disconnecting any cables of the

system equipment.

• Make sure the ampliﬁ er is also off before disconnecting the power cord from the mains

socket.

• The electric system and mains socket have an adequate grounding, compatible with the

safety norms.

• Be sure the required voltage for the ampliﬁ er complies with the local voltage of the mains

circuit.

• Never connect loudspeakers with a lower resistance (Ohm) as required by the ampliﬁ er (see

speciﬁ cations).

Description front panel:

543

1. Ventilation opening

2. Volume control LEFT

3. LED indicators

- CLIP:LED lights up when the ampliﬁ er is reaching it‘s peak power (Note: reduce the volume

to avoid damage to ampliﬁ er and/or loudspeakers)

- SIGNAL: LED lights up with incoming signal from connected equipment

- POWER: LED lights up when the ampliﬁ er is switched on.

4. Volume control RIGHT

5. Power on/off switch

Produktspezifikationen

Marke:	König
Kategorie:	Empfänger
Modell:	PA-AMP6000-KN
Breite:	483 mm
Tiefe:	242 mm
Gewicht:	8300 g
Produktfarbe:	Schwarz
Übertragungstechnik:	Kabelgebunden
Höhe:	88 mm
Zweck:	Leistung/Phase
AC Eingangsspannung:	230 V
AC Eingangsfrequenz:	50 - 60 Hz
Audio Kanäle:	- Kanäle
THD, totalklirren:	0.3 %
Rauschverhältnis (SNR):	95 dB
Frequenzbereich:	20 - 20000 Hz
XLR-Out:	4
RMS Leistungsoutput pro Kanal (4 Ohm):	170 W
Stromeingang:	Ja
Synchronisations-Eingangsimpedanz:	10000 Ohm
Lautsprecher-Konnektivitätstyp:	Polklemme
Leistungshöhepunkt pro Kanal:	300 W
Rack-Kapazität:	2U
Line-Eingänge (RCA):	2
Übersprechen (1 kHz):	90 dB
RMS Leistungsoutput pro Kanal (8 Ohm):	100 W