Kondator 935-PM91W Bedienungsanleitung

Kondator Stekkerdoos 935-PM91W

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Kondator 935-PM91W (1 Seiten) in der Kategorie Stekkerdoos. Dieser Bedienungsanleitung war für 6 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/1
Removable installation
935-PM91W
935-PM91
Revised: 21
Drill
Drill a hole
in the table
Drill
Drill a hole
in the table
Removable
installation
Removable
installation
Permanent
installation
Permanent
installation
OPTIONAL
ATTACH AND INSERT (NON REMOVABLE)
Attach clips by guiding them into the side tracks.
The clips will keep the product in place without
the fastening nut.
Push the Powerdot all the way down the hole.
Lastly, plug the Powerdot in to the wall socket.
NOTE! Removing the product once inserted
can damage the table and /or the product.
HOW TO REMOVE (WITH CLIPS)
To minimize the risk of damaging the table
and/or product, turn the grommet clockwise
until the clips re-position and loosen up.
NOTE! Removing the product once inserted
can damage the table and /or the product.
INSERT (without clips)
Insert Powerdot into the hole
and feed the power plug through
the plastic fastening nut.
TURN CLOCKWISE & PLUG IN
Turn the plastic fastening nut as far
up the thread as possible.
Make sure that it has been thoroughly
tightened.
Lastly, plug the Powerdot in to the
wall socket.
PULL UPWARD
When the clips are loose, pull
the Powerdot upward until fully removed.
Permanent installation
1
x 1
x 2
- 1 USB Charger
(QC2.0 : 5V 2A /
9V 1.2A / 12V 1A)
- 1 Type B socket
/w 1800 mm cable

Produktspezifikationen

Marke: Kondator
Kategorie: Stekkerdoos
Modell: 935-PM91W

Brauchst du Hilfe?

Wenn Sie Hilfe mit Kondator 935-PM91W benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten