Kodak KD65 Bedienungsanleitung

Kodak Nicht kategorisiert KD65

Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Kodak KD65 (2 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war fĂĽr 15 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/2
P
C
( )
F I L M T I P
SPECIFICATIONS
Type: Compact, auto-focus 35 mm camera
LCD Panel: Display indicators for red-eye reduction, fill-flash/
flash-charging, flash-off, infinity-focus, self-timer, and the
frame number and battery symbol
Lens: 28 mm,
f
/4.5; 3-element glass lens
Focus System: 4 zone active infrared AF system with focus
lock; optional infinity-focus mode
Viewfinder: Reverse-Galilean with bright line field of view
and AF aiming indicator; panoramic masking in panoramic
mode
Film Speed: DX (ISO) 100–1000 for colour or black-and-
white print film
Focus Range: Daylight: 0.8 m to infinity
Flash Unit: Electronic with ISO 100/21Ëš, guide number of
8m; flash automatically turns on at low-light levels
Aperture:
f
/13–
f/
4.5
Shutter: 1/150 to 1.2 sec
Power Source: one 3-volt lithium KODAK K123LA
(or equivalent) Battery
Dimensions: 123.5 x 68.8 x 32.7 mm
Weight: 170 g
LCD PANEL
GETTING TO KNOW YOUR CAMERA
P
C
( )
(20)
FILM
DOOR
(19)
TRIPOD
SOCKET
(18)
STRAP
POST
(17)
BATTERY
DOOR
(16)
FILM
WINDOW
(15)
VIEWFINDER
EYEPIECE
(14)
PANORAMIC
SWITCH
(26)
SELF-TIMER
INDICATOR
(28)
INFINITY-FOCUS
INDICATOR
(29)
FILL-FLASH/
FLASH-CHARGING
INDICATOR
(30)
FLASH-OFF
INDICATOR
(32)
RED-EYE-
REDUCTION
INDICATOR
(27)
PICTURE
COUNTER
(31)
BATTERY
SYMBOL
ATTACHING THE
WRIST STRAP
Thread the short loop of the strap under the Strap
Post ; pull the long loop through the short loop and(18)
pull it tight.
LOADING THE BATTERY
This camera uses a 3-volt KODAK K123LAlithium
(or equivalent) Battery that supplies power for all
camera operations.
NOTE: This camera automatically turns off after
approximately 3 minutes to conserve battery
energy.
Battery Tips
• Keep a spare battery with you at all times.
Lithium batteries perform consistently until they
suddenly die.
• Read and follow all warnings and instructions
supplied by the battery manufacturer.
• Keep batteries away from children.
• Do not try to take apart, recharge or short circuit the
battery, or subject it to high temperature or fire.
• Store batteries in their original packaging prior to
use.
Low-Battery Indicator
It’s time to replace the battery when—
• the Battery Symbol appears on the LCD(31)
Panel .(3)
• the battery symbol on the LCD panel “blinks.”
• none of the indicators appear on the LCD panel.
LOADING THE FILM
If in sunlight, turn your back to the sun and load the
film in the shade of your body.
1. (9)Slide the Film-Door Latch down to open the Film
Door .(20)
2. Insert the flat end of the film cartridge over the Film
Spindle . Push the other end of the film(25)
cartridge down into the Film Chamber until it(24)
snaps into place. Do not force it into the film
chamber.
NOTE: If the Picture Counter on the LCD(27)
Panel (3) blinks “0,” the film is not loaded correctly.
Open the film door and reload the film.
TAKING PICTURES
1. Press the On/Off Button (2)
to turn the camera ON.
When you turn the camera
on, the lens cover
automatically opens.
2. Hold the camera steady.
Be careful not to cover
the flash, lens, and
auto-focus windows
with your fingers.
3. Look through the Viewfinder Eyepiece and center(15)
the auto-focus brackets on your subject. For a sharp
picture, Whenstand at least 0.8 m from your subject.
your subject is within 0.8 to 1.2 m from the camera,
position the subject below the top format/panoramic
indicators.
4. Gently press the Shutter
Button (1) completely
down to take the picture.
The film automatically
advances to the next frame.
2. Compose your picture within the Viewfinder
Eyepiece and press the Shutter Button .(15) (1)
3. Slide the panoramic switch down to return to the
normal position.
2. Partially depress and hold the Shutter Button to(1)
lock the focus.
3. While still partially depressing the shutter button,
move the camera until your subject is where you
want it within the Viewfinder Eyepiece .(15)
ON/OFF
MODE
(13)
LIGHT
SENSOR
(12)
SELF-TIMER
LAMP
(10)
AUTO-FOCUS
WINDOWS
(9)
FILM-DOOR
LATCH
(8)
FLASH
(7)
VIEWFINDER
(6)
SELF-TIMER
BUTTON
(5)
REWIND
BUTTON
(4)
MODE-SELECTION
BUTTON
(3)
LCD
PANEL
(2)
ON/OFF
BUTTON
(1)
SHUTTER
BUTTON
F I L M T I P
P
C
ON/OFF
MODE
ON/OFF
4. Press the shutter button down to takecompletely
the picture.
P
C
VIEWFINDER
VIEWFINDER
© Eastman Kodak Company, 1997
VIEWFINDER
AUTO-FOCUS
BRACKETS
FORMAT/
PANORAMIC
INDICATORS
VIEWFINDER
AUTO-FOCUS
BRACKETS
4
4
4
444
3
3
3
333
2
2
2
222
1
1
1
111
(25)
FILM
SPINDLE
(24)
FILM
CHAMBER
(23)
DX-CODE
SENSORS
(22)
FILM
TAKE-UP
SPOOL
(21)
FILM-LOAD
MARK
P
C
ON/OFF
MODE
4. Close the film door. The film automatically
advances to the first frame and the LCD Panel (3)
displays “1.” Do not open the film door after you
start taking pictures or you will ruin the film.
If the end of the film extends past the film-
load mark, gently push the excess back into the
cartridge.
P
( )
F I L M T I P
C
3. Pull out the film leader until the tip reaches the Film-
Load Mark . Lay the film between the film-(21) flat
guide rails.
Continued on reverse side
â–Ľ
Using the Focus Lock
This camera automatically focuses on whatever is
within the auto-focus brackets of the viewfinder
eyepiece. If you want to take a picture with the subject
positioned outside of the auto-focus brackets, use the
auto-focus lock as follows:
1. Place the auto-focus brackets on the subject you
want focused in the picture.
Printing Panoramic Format Pictures
If you took panoramic pictures on the entire roll of film, ask
the processing-lab clerk to print the film only in the
panoramic format. If there are panoramic and normal
format pictures on the film, ask the clerk to print the film in
both the normal and panoramic formats. (Normal format
prints are 88.9 x 127 mm or 102 x 152 mm, whereas
panoramic format prints are 88.9 x 254 mm.) You may want
to consult the processing lab for development time and
cost, and don’t forget to check the optional panoramic box
on the photofinishing envelope.
This Class B digital apparatus meets all requirements of the
Canadian Interference-Causing Equipment Regulations.
KODAK CANADA INC.
Toronto, Ontario M6M 1V3
1-97
Pt. No. Kodak is a trademark. Printed in U.S.A. 8B9637
Taking Panoramic Pictures
(without changing
rolls of film, you can switch between the panoramic
and normal formats)
The panoramic selection allows you to take wide-
angle shots, such as large groups, football and
baseball fields, landscapes, tall buildings, waterfalls,
etc.
Note to Owners of the Quartz Date and Time
Model: Date and time imprinting is not available in the
panoramic format.
1. (14)Slide the Panoramic Switch from normal to the
panoramic position. The Viewfinder changes to(7)
show the selected field of view.
ENGLISH
Congratulations! And thank you for buying a KODAK Camera.
Your new compact, auto-focus 35 mm camera with motorized
film advance and auto-film rewind, makes taking pictures easy.
The camera uses any DX/DXN, 35 mm colour or black-and-
white print film with a speed of ISO 100, 200, 400, or 1000.
For warranty purposes, please keep your sales receipt
as proof of the date of purchase.
Need help with your camera? Call Kodak (Canada only) toll free
from 8:30 a.m. to 5:00 p.m. (eastern time zone) Monday through
Friday at 1 (800) 465-6325, ext. 36100; for the Toronto area, call
(416) 766-8233, ext. 36100.
(11)
LENS COVER/
LENS
KD60/65
CAMERA
TAKING PICTURES
(Continued)
Using the Self-Timer
When you want to include yourself in the picture, use the
self-timer feature.
1. Use the Tripod Socket to attach the camera to a(19)
tripod, or place the camera on another firm support.
2. (2)Press the On/Off Button to turn the camera ON.
3. Press the Self-Timer Button . The Self-Timer(6)
Indicator appears on the LCD Panel and the(26) (3)
Self-Timer Lamp glows red.(12)
4. Compose your picture and press the Shutter
Button .The self-timer lamp “blinks” approximately(1)
10 seconds before the picture is taken. After you take
the picture, the self-timer automatically turns off.
TAKING FLASH PICTURES
In dim light, such as indoors or outdoors in heavy
shade or on dark overcast days, you need flash. Your
camera features automatic flash that fires when you
need it.
1. (2)Press the On/Off Button to turn the camera ON.
2. Keep the subject within the distance range for the
speed of the film in your camera (see table below).
Be careful not to cover the flash, lens, and auto-
focus windows with your fingers.
3. Press the Shutter Button down. If the(1) partway
Flash-Charging Indicator on the LCD Panel (29) (3)
“blinks,” the flash is not fully charged. Wait for the
blinking to stop and the indicator to disappear
before you take the picture.
UNLOADING THE FILM
Within a few seconds after the last picture is taken, the
film automatically starts to rewind. The Picture
Counter on the LCD Panel blinks “0” when the(27) (3)
film is finished rewinding. Wait for the camera motor to
stop before you open the film door and remove the
film. Reload your camera with fresh Kodak film.
CARING FOR YOUR CAMERA
1. Protect the camera from dust, moisture, sudden impact, and
excessive heat.
CAUTION: Do not use solvents or harsh or abrasive cleaners
on the camera body.
2. If the lens appears dirty, breathe on it to form a mist and wipe
the surface gently with a soft, lintless cloth or lens-cleaning
tissue. Do not apply pressure or you will scratch the lens. Never
wipe a dry lens.
CAUTION: Do not use solvents or solutions not designed for
cleaning camera lenses. Do not use chemically treated tissues
intended for cleaning eyeglasses.
3. Remove the battery when you store the camera for a long time.
CAUTION: To prevent possible damage and electrical shock,
do not try to take apart or repair the camera or flash unit by
yourself.
TROUBLESHOOTING
What happened Probable cause Solution
Camera will Power off Press on/off button
not operate
Flash not ready Wait for the flash-
charging indicator on
LCD panel to stop
blinking
Film not loaded See LOADING
THE FILM
There are no more Remove the film
pictures remaining
Battery weak, dead, Replace or reload the
missing, or improperly battery; see LOADING
inserted THE BATTERY
Film does Battery weak, dead, Replace or reload the
not advance missing, or improperly battery; see LOADING
inserted THE BATTERY
Film completely See LOADING
used (LCD panel THE FILM
has steady “0”)
Film not loaded See LOADING
properly THE FILM
Film does Film did not load See LOADING
not rewind properly THE FILM
Battery weak, dead, Replace or reload the
missing, or improperly battery; see LOADING
inserted THE BATTERY
LCD panel Battery weak, dead, Replace or reload the
is blank missing, or improperly battery; see LOADING
inserted THE BATTERY
SETTING THE DATE AND TIME
The date and time feature enables you to record the date in a
choice of four formats: (month/day/year, day/month/year,
year/month/day) or time (day/hour/minute) directly onto the film. It
features a quartz clock and automatic calendar through the year
2019, including leap years. With the camera held horizontally, the
data is recorded onto the lower right portion of the picture; in the
vertical format with the shutter release up, imprinting occurs on
the lower left portion but positioned horizontally on the picture.
Date and Time Imprinting
Press the Mode Button , located on the film door , to select(b) (20)
the desired data type; then take the picture. Following the
exposure, the Print Indicator blinks in the data panel for(a)
approximately two-to-three seconds to confirm imprinting.
NOTE: The imprinted data may be difficult to read if the subject
area over which it is superimposed is bright or non-uniform. If the
data panel is consistently dim, replace the date-back battery (see
Replacing the Date-Back Battery).
NOTE: If you want to stop the self-timer operation before
the picture is taken, repress the self-timer button or turn
the camera off.
Using the Infinity-Focus Mode
To capture sharp, distant scenery, use the infinity-focus
mode.
1. (2)Press the On/Off Button to turn the camera ON.
2. (4)Press the Mode-Selection Button to select infinity
focus. Make sure the Infinity-Focus Indicator (28)
appears on the LCD Panel .(3)
3. (1)Press the Shutter Button to take the picture.
NOTE: The camera automatically returns to the auto-
flash/start position after you take the picture.
Tips for Better Pictures
• Keep your pictures simple. Move close enough to your
subject so it fills the viewfinder but not closer
than 0.8 m.
• Take pictures at the subject’s level. Kneel down to
take pictures of children and pets.
• Hold your camera vertically to capture tall, narrow
subjects, such as waterfall, skyscraper, or single
person.
• Add interest to your picture by framing it with a tree
branch, a window, or even the rails of a fence.
• Keep the sun behind you. This provides best subject
illumination.
3. Press the Shutter Button to take the picture.(1)
4. To cancel the red-eye-reduction feature, turn the
camera off or press the mode-selection button to
return to the auto-flash/start position.
NOTE: When you take flash pictures using this
feature, the camera fires a short flash before the
picture is taken. The subject’s eye pupil closes
partially to reduce the red-eye effect.
Using the Fill Flash and Flash Off
Fill Flash
— Bright light indoors or outdoors from
backlit subjects can create dark shadows (especially
on faces) in high-contrast scenes. Use fill flash to
lighten these shadows.
Flash Off
— When you do not want to use the
flash, especially indoors where flash is prohibited,
such as in theaters and museums, or in dim lighting
situations, use flash off. Use a tripod (tripod
socket ) or place the camera on another firm[19]
support.
1. (2)Press the On/Off Button to turn the camera ON.
2. (4)Press the Mode-Selection Button to select fill
flash or flash off . Make sure the correct(29) (30)
indicator for the selected mode appears on the LCD
Panel .(3)
3. Press the Shutter Button to take the picture.(1)
NOTE: The camera automatically returns to the auto-
flash/start position after you take the picture.
Flash Tips
• Turn on room lights and have the subject face the
lights to minimize red eyes in pictures.
• Stand at an angle to shiny surfaces like windows or
mirrors to avoid flash reflection and bright spots in
your pictures.
• Keep your fingers and other objects away from the
picture-taking lens, flash, and auto-focus windows
to avoid dark or light pictures.
4. completely Press the shutter button down to take
the picture.
Flash-to-Subject Distance
ISO Film Speed Flash-to-Subject Distance
100 0.8 to 3.7 m
200 0.8 to 4.0 m
400 1.0 to 5.6 m
1000 1.6 to 8.9 m
Using the Red-Eye Reduction
Some people’s eyes (and some pets’) can reflect flash
with a red glow. To minimize red eye in flash or fill-
flash pictures, use the red-eye-reduction feature.
1. (2)Press the On/Off Button to turn the camera ON.
2. (4)Press the Mode-Selection Button once to move
to the red-eye-reduction position. Make sure the
Red-Eye-Reduction Indicator appears on the(32)
LCD Panel .(3)
Using the Rewind Button
If you don’t want to take pictures on the entire roll of
film, you can automatically rewind the film by pressing
the Rewind Button .(5)
ON/OFF
( )
MODE
ON/OFF
MODE
ON/OFF
( )
MODE
ON/OFF
ON/OFF
( )
MODE
ON/OFF
( )
MODE
FOR OWNERS OF THE QUARTZ
DATE & TIME MODEL
4
4
4
444
6
6
6
666
5
5
5
555
SERVICE INFORMATION
Where to Get Help
If you have any questions about your camera or have difficulty in
using it, reread this manual and check Troubleshooting. If you
have difficulty that isn’t covered in Troubleshooting:
Take the camera, the film you were using, and any sample
prints to your photo dealer OR call Kodak toll free (in Canada)
from 8:30 a.m. to 5:00 p.m. (eastern time zone) Monday through
Friday at 1 (800) 465-6325, ext. 36100; for the Toronto area,
call (416) 766-8233, ext. 36100.
If your camera needs repair, you may send it through your
photo dealer or directly to our Service Centre; see WARRANTY.
Packing Instructions
1. Include a note your camera, giving all details: model,with
date, place of purchase, a description of the problem,
sample negatives and prints, and the dated proof of
purchase. If possible, include a telephone number where
you can be reached between 8:00 a.m. and 5:00 p.m.
2. Place the camera in a plastic bag to keep out dirt and
packing material.
3. Use a sturdy carton that is large enough for you to
surround the camera completely with packing material such
as crumpled newspaper.
4. Securely fasten the carton with tape. Clearly write the
address of the Service Centre and your name and address
on the top and bottom of the carton.
5. WARRANTYShip the carton to the service centre listed in .
It's a good idea to insure the camera for replacement value.
WARRANTY INFORMATION
Full One-Year Warranty
Warranty Time Period
This KODAK Camera is warranted by Kodak to function properly
for one year from the date of purchase.
Warranty Coverage
Upon submission of dated proof of purchase,
Kodak will REPAIR
or REPLACE, at Kodak’s option, this camera if it fails to function
properly during the warranty period.
How to Obtain Service
For service on this camera, return it through a dealer in Kodak
products, or send it directly to Kodak at the address listed below.
Enclose a note with the camera giving details of the problem and
your complete name and address to:
Kodak Canada Inc.
Kodak Equipment Service Centre
3500 Eglinton Avenue West
Toronto, Ontario
CANADA M6M 1V3
Limitations
This warranty does not apply to the batteries used in this
camera.
The warranty does not cover circumstances beyond
Kodak’s control, nor problems caused by failure to follow the
care and operating instructions in the manual.
Requests for Warranty service will not be accepted without
Proof of the Date of Purchase, such as a copy of the original
dated product sales receipt. (Always keep the original for your
records.)
The option of repair or replacement, at Kodak’s discretion, is
Kodak’s only obligation.
Kodak will not be responsible for any
consequential or incidental damages resulting from the sale
or use of this camera, regardless of the cause of such
damages.
Kodak disclaims all other warranties and conditions,
express or implied, including, without limitation, implied
warranties and conditions of merchantible quality and fitness
for a particular purpose and those arising by statute or
otherwise in law or from a course of dealings or usage of
trade.
Supplemental Provisions
Should any provision of this warranty statement not be permitted
by any applicable law, such provision may not apply to you. This
warranty statement gives you specific legal rights and you may
have other rights which vary from province to province.
(f)
(i) (e)
(g)
(f)
(f)
(f)
(h)
(e)
(g)
Replacing the Date-Back Battery
1. Open the Film Door .(20)
2. Slide the Film-Pressure Plate to the right until the silver(e)
spring clears the Retaining Ears and reveals the Battery(f)
Cover .(g)
3. Remove the screw from the battery cover using a small Phillips
screwdriver.
4. Insert a new 3-volt lithium CR2025 (+ side up) battery. Replace
the battery cover making sure the square Tab is under the(h)
top retaining ear.
5. Reattach the screw and slide the film-pressure plate back,
making sure it engages into the Center Notch and is under(i)
both retaining ears on the film door.
NOTE: After you replace the battery, you will need to reset
the date and time.
Mode Selection
Use the Mode Button to change the data display as shown.(b)
MODE/SELECT/SET
Setting Data
1. Press the Mode Button to select the desired data type.(b)
2. Use the Select Button to move between different parts of(c)
the displayed data. With the data displayed, pressing the select
button in succession causes the settings for year, month, and
then day to blink. On the data panel, the letter “M” indicates the
location for the month and the apostrophe “ ’ ” for the year.
In time mode, pressing the select button successively
causes the hour, minute, and then the colon to blink.
3. Press the Set Button to change the blinking display.(d)
Date back subject to minor appearance and specification
changes.

Produktspezifikationen

Marke: Kodak
Kategorie: Nicht kategorisiert
Modell: KD65

Brauchst du Hilfe?

Wenn Sie Hilfe mit Kodak KD65 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Nicht kategorisiert Kodak

Kodak

Kodak RWF-108H Bedienungsanleitung

6 September 2024
Kodak

Kodak Advantix 1700 Bedienungsanleitung

22 August 2024
Kodak

Kodak Advantix T70 Bedienungsanleitung

22 August 2024
Kodak

Kodak Advantix T550 Bedienungsanleitung

22 August 2024
Kodak

Kodak Brownie Starmite II Bedienungsanleitung

22 August 2024
Kodak

Kodak DC240 Bedienungsanleitung

22 August 2024
Kodak

Kodak Automatic 35 R4 Bedienungsanleitung

22 August 2024
Kodak

Kodak DC20 Bedienungsanleitung

22 August 2024
Kodak

Kodak Advantix T40 Bedienungsanleitung

22 August 2024
Kodak

Kodak Stereo 1 Bedienungsanleitung

22 August 2024

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung fĂĽr -Kategorien-

DAS Audio

DAS Audio AX-112-5 Bedienungsanleitung

16 Oktober 2024
Ferplast

Ferplast Ergocomfort Freetime Bedienungsanleitung

16 Oktober 2024
AEG

AEG MECK52 Bedienungsanleitung

16 Oktober 2024
Makita

Makita UR012G Bedienungsanleitung

16 Oktober 2024
Stihl

Stihl HT 70 Bedienungsanleitung

16 Oktober 2024
Ernesto

Ernesto H14270 Bedienungsanleitung

16 Oktober 2024
IFM

IFM AC901S Bedienungsanleitung

16 Oktober 2024
Nedis

Nedis RFPOM120FBK Bedienungsanleitung

16 Oktober 2024
AEG

AEG E9KLCS01 Bedienungsanleitung

16 Oktober 2024
ART

ART ProChannel II Bedienungsanleitung

16 Oktober 2024