KLH Audio Quincy Bedienungsanleitung

KLH Audio Lautsprecher Quincy

Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr KLH Audio Quincy (4 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war fĂĽr 28 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/4
FLOORSTANDING
LOUDSPEAKERS
KENDALL QUINCY CAMBRIDGE
MANUAL
WELCOME!
Thank you for purchasing one of the best sounding loudspeakers
ever produced. At KLH, we have been making high-quality com-
ponents since 1957, and we take pride in making your music and
movies the best experience possible.
FOR YOUR SAFETY
Important Safety Instructions!
1. READ these instructions.
2. KEEP these instructions.
3. HEED all warnings.
4. FOLLOW all instructions.
5. DO NOT use this apparatus near water.
6. CLEAN with dry cotton cloth. Do not use microfiber.
7. DO NOT block any ventilation openings. Install in accordance
with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat
registers, stoves, or other heat producing appliances
9. USE ONLY attachments/accessories specified by
the manufacturer.
10. DO NOT expose to excess moisture or liquids, and do not
place containers with liquids on top of speakers.
The exclamation point, within an equilateral triangle, is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the product.
The lightning flash with arrowhead symbol within an
equilateral triangle is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude
to constitute a risk of electrical shock to persons.
EU COMPLIANCE INFORMATION:
Eligible to bear the CE mark, Conforms to European Union EMC
Directive 2004/108/EC; European Union Restriction of Hazard-
ous Substances Recast (RoHS2) Directive 2011/65/EC; European
Union WEEE Directive 2002/96/EC.
KLH and the KLH logo are registered trademarks of Kelley Global
Brands Inc., registered in the U.S. and other countries.
WEEE NOTICE
Note: This mark applies only to countries within the European
Union (EU) and Norway.
This appliance is labeled in accordance with European
Directive 2002/96/EC concerning waste electrical and
electronic equipment (WEEE). This label indicates that
this product should not be disposed of with household
waste. It should be deposited at an appropriate facility
to enable recovery and recycling.
CONTENTS:
This package should contain 2 sets (4 each) of feet. The rubber feet
are used for solid flooring such as wood, tile and concrete, and the
chrome-plated spikes are used for carpet. Spikes may be used on
solid flooring when placed on chrome plated isolation discs.
UNPACKING
Place the package on the floor with the box flaps up. Cut the tape
with a utility knife to open the package. Fold the carton flaps back
and carefully slide the speaker and packaging from the box, or turn
the box over with flaps open and remove the box. Stand the speak-
er and packing upright, making sure the loudspeaker plinth is on the
bottom, and remove the packing material.
CONNECTING YOUR
FLOORSTANDING LOUDSPEAKERS
All three floorstanding loudspeakers have the same quality nick-
el-plated binding posts that will accommodate stripped wire, spade
connectors or banana plugs. Be sure to use quality speaker cables,
up to 12 gauge (AWG). The lowest gauge possible is recommended.
Before using banana plugs, be sure to remove the black and red
inserts on the binding posts. The straps connecting the binding
posts should remain in place for conventional wiring, but may be
removed where bi-wiring is preferred. See the following diagrams
in the AMPLIFICATION section for further instruction.
C A U T I O N
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
WARNING: Do Not Open! Risk of Electrical Shock. Voltages in this
equipment are hazardous to life. No user-serviceable parts inside.
Refer all servicing to qualified service personnel.
1
3
2
AMPLIFICATION
Conventional amplification involves a single stereo amplifier
wired to a single set of binding posts with straps connecting the
second set of posts as seen in diagram above.
Simply attach the positive wire + to the red post, and the nega-
tive wire – to the black post.
BI-AMPLIFICATION
This connection method (see diagram above) uses two separate
two channel amplifiers to power one set of speakers. One stereo
amplifier connects to one speaker, and the other identical amplifier
powers the second speaker. This is referred to as bi-amplification.
Be sure to remove the terminal straps before using the bi-ampli-
fication method. Connect positive + and negative – cables from
the amplifier to the top terminals, and make sure the connection
is tight. Connect the second set of cables (positive and negative)
to the bottom terminals and tighten. Repeat these same steps
using the second amplifier to connect to the second terminals.
ROOM POSITION
Placement of your floorstanding loudspeakers is a personal pref-
erence, but it is recommended that speakers be placed at least 6
feet apart whether they are being used for a stereo application,
or as the main left and right channels for a home theater. For
best imaging and separation, listening distance from the speakers
should be about 1.5 times the distance the speakers are apart
from each other.
Example: If the distance between each speaker and the listening
position is 9 feet, then the speakers should be 6 feet apart from
one another.
Also be sure that loudspeakers are placed at least 12 inches away
from any wall. Further adjustments can be made to optimize your
listening experience.
NOTE: When moving floorstanding loudspeakers take extra cau-
tion to place hands in a position that will not damage the drivers.
This can best be done by placing one hand in the port at the back
of the loudspeaker, and the other hand at the either top corner.
LEFT
SUB
RIGHT
CENTER
SURROUND
LEFT
SURROUND
RIGHT
PORT TUNING
If placing your floorstanding loudspeakers 6 inches or closer to a
wall, bass output can be controlled by reducing the amount of air
flow from rear ports. You can “tune” bass output by using the tun-
ing stops provided with your loudspeaker by inserting as shown.
NOTE: Port tuning stops included in Kendall model ONLY.
SPIKE AND RUBBER FEET
LIst of items included in package:
Spiked and rubber feet are to be used for bass decoupling
(reducing bass transmission) and should only be used when
plinth is on the bottom of the speaker. To install metal
spiked feet, first thread ridged discs onto the metal spikes
until flush. Follow by threading both into the insert at the
bottom corners of the plinth. To level the speaker, height
may be adjusted by turning the spike ONLY.
To avoid damage to floors other than carpet, the metal
spike can be used with protective ring as shown below left.
Threaded rubber feet can be used on virtually all surfaces.
Installation is shown below on right
x 8 x 8 x 8 x 8

Produktspezifikationen

Marke: KLH Audio
Kategorie: Lautsprecher
Modell: Quincy

Brauchst du Hilfe?

Wenn Sie Hilfe mit KLH Audio Quincy benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Lautsprecher KLH Audio

KLH Audio

KLH Audio Albany II Bedienungsanleitung

29 August 2024
KLH Audio

KLH Audio Quincy Bedienungsanleitung

29 August 2024
KLH Audio

KLH Audio Kendall 2C Bedienungsanleitung

29 August 2024
KLH Audio

KLH Audio Cambridge Bedienungsanleitung

29 August 2024
KLH Audio

KLH Audio Kendall Bedienungsanleitung

29 August 2024
KLH Audio

KLH Audio Kendall 2S Bedienungsanleitung

29 August 2024
KLH Audio

KLH Audio Kendall 2F Bedienungsanleitung

29 August 2024
KLH Audio

KLH Audio Beacon Bedienungsanleitung

29 August 2024
KLH Audio

KLH Audio Model Three Bedienungsanleitung

29 August 2024
KLH Audio

KLH Audio Albany Bedienungsanleitung

29 August 2024

Bedienungsanleitung Lautsprecher

Neueste Bedienungsanleitung fĂĽr -Kategorien-

Sonance

Sonance Visual Performance VP65 SST Bedienungsanleitung

16 Oktober 2024
Bowers And Wilkins

Bowers And Wilkins CWM664 Bedienungsanleitung

16 Oktober 2024
Focal

Focal Chorus 826 V Bedienungsanleitung

16 Oktober 2024
KEF

KEF Ci200ER Bedienungsanleitung

16 Oktober 2024
Steren

Steren SPK-1100BL Bedienungsanleitung

16 Oktober 2024
Aiwa

Aiwa SP-A100 Bedienungsanleitung

16 Oktober 2024
Trust

Trust GXT 628 Bedienungsanleitung

15 Oktober 2024
Pyle

Pyle PBMSPG6 Bedienungsanleitung

15 Oktober 2024
Marshall

Marshall Tufton Bedienungsanleitung

15 Oktober 2024
Sunstech

Sunstech SPUBT780 Bedienungsanleitung

15 Oktober 2024