KitchenAid KUIX335HBL Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für KitchenAid KUIX335HBL (26 Seiten) in der Kategorie Eiswürfelmaschine. Dieser Bedienungsanleitung war für 14 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/26
1
LEARN MORE
In an effort to conserve natural resources, this ice maker includes a co A compndensed User Guide. lete Use and Care
Guide can be downloaded at www.kitchenaid.com/manuals. The model number is located on the inside of the ice maker.
In the U.S.A., register your ice maker at ww kitchenaid.comw. .
In Canada, register your ice maker at .www.kitchenaid.ca
Para una version de estas instrucciones en es ñol, visitepa .www.kitchenaid.com
You can be killed or seriously injured if you don’t immediately follow instructions.
You can be killed or seriously injured if you don’t follow instructions.
All sa ty messages will tell u what the potential hazard is, tell u how to reduce the chance of injur and tell you what can happen if thefe yo yo y,
instructions are not llofo wed.
Your safety and the safety of others are very important.
We have pr ided ma impoov ny rtant sa ur applianc Alfety messages in this manual and on yo e. ways read and ob all safety messageey s.
This is the sa ty alert symbol.fe
This symbol alerts you to potential hazards that can kill or hurt u and others.yo
All sa ty messages will llow the sa ty aler “DANGER or “WARNINGfe fo fe t symbol and either the word .
These words mean:
DANGER
WARNING
IMPORTANT SAFETY INSTRUCTIONS
WARNING : To reduce the risk of fire, electric shock, or injury when using your ice maker, follow these basic
precautions:
SAVE THESE INSTRUCTIONS
Plug into a grounded prong outlet.3
Do not remove ground prong.
Do not use an adapter.
Do ot se an extension cord.n u
Disconnect power before cleaning.
Disconnect power before servicing.
Replace all ls parts and pane before operating.
Use two or more people to move and install ice maker.
Stat of alifornia Proposition 65 rnings:e C Wa
WARNING: This produc contains one or more chemical kn to th Stat of California to cause cancer.t s own e e
WARNING: This produc contains one or more chemical kn to th Stat of California to cause bi de ct or othe reproductiv harm.t s own e e rth fe s r e
User Guide
Ice Maker
W11246207A
2
How Your Ice Maker Works
When you rst start your ice maker, the water pan will ll and the
system will rinse itself before starting to make ice. The rinsing process
takes about 5 minutes.
Under normal operating conditions, the ice maker will cycle at preset
temperatures. The ice level sensor located in the ice storage bin will
monitor the ice levels.
IMPORTANT: If the water supply to the ice maker is turned off, be
sure to set the ice maker control to OFF.
The Ice Making Process
1. Water is constantly circulated over a freezing plate. As the water
freezes into ice, the minerals in the water are rejected. This
produces a sheet of ice with a low mineral content.
2. When the desired thickness is reached, the ice sheet is released
and slides onto a cutter grid. The grid divides the sheet into
individual cubes.
3. The water containing the rejected minerals is drained after each
freezing cycle.
4. Fresh water enters the machine for the next ice making cycle.
5. Cubes fall into the storage bin. When the bin is full, the ice maker
shuts off automatically and restarts when more ice is needed. The
ice bin is not refrigerated, and some melting will occur. The
amount of melting varies with room temperature.
NOTE: As the room and water temperatures vary, so will the amount
of ice produced and stored. This means that higher operating
temperatures result in reduced ice production.
Using the Controls
1. To start ice production, press ON/OFF.
2. To stop ice maker operation, press ON/OFF.
NOTES:
Pressing the ON/OFF button does not shut off power to the ice
maker.
Allow 24 hours to produce the rst batch of ice. Discard the rst 2
batches produced.
Max Ice Mode
Select the Max Ice feature when you have an upcoming need for a
large amount of ice and the ice bin is low or empty. Max Ice mode will
produce a greater quantity of ice in a 24-hour period.
Press MAX ICE while the ice maker is on. The indicator light will
illuminate.
Press MAX ICE again to turn off the Max Ice feature. The indicator
light will turn off.
The Max Ice mode will be on when you rst turn on the product.
It will turn off after 24 hours. To turn Max Ice back on, press MAX
ICE.
Clean
It is recommended that you clean the ice maker when the “Cleaning
Needed” light is illuminated or 9 months has elapsed, or ice
production decreases signicantly. To clean your ice maker, see
“Ice Maker System” in the “Cleaning” section.
Door Ajar Alarm
The Door Ajar Alarm feature sounds an alarm when the ice maker
door is open for 5 minutes. The alarm will repeat every 2 minutes.
Close the door to turn off. The feature then resets and will reactivate
when the door is left open again for 5 minutes.
Water Filtration System
Installing a Water Filter
1. Purchase a KitchenAid approved water lter.
2. Take the water lter out of its packaging and remove the cover
from the O-rings. Be sure the O-rings are still in place after the
cover is removed.
Do not use with ter that is microbiologically unsa or wa fe
of unknown quality without adequate disin ction before fe
or after the system. Systems certified r cyst reduction fo
may be used on disinfected ters that may contain wa
filterable cysts.
C. Alignment pin
D. Alignment arrow
A B C D
A. Cover
B. O-rings
OPERATING YOUR ICE MAKER
3
3. The water lter compartment is located in the right-hand side of
the ice maker controls. For 15" (38.1 cm) models, push in on the
door to release the latch, and then lower the door.
4. Using the arrow pointing to the alignment pin on the side of the
lter and the arrow inside the control housing, align the alignment
pin with the cutout notch and insert the lter into the housing.
5. Turn the lter clockwise until it locks into the housing. Ensure
that the alignment arrow on the lter head aligns with the locked
symbol on the control box housing.
NOTE: If the lter is not correctly locked into the housing, the ice
maker will not produce ice.
6. For 15" (38.1 cm) models, push the control box door closed until
the latch snaps closed.
The Water Filter Status Light
The water lter status lights will help you know when to change your
water lter.
The “Order Filter” status light will be illuminated when it is time to
order a replacement lter.
The “Replace Filter” status light will be illuminated when it is time
to replace the lter.
Replacing the disposable water lter with a new lter will
automatically reset the lter status tracking feature. See “Using
the Controls.
Replace the Water Filter
To purchase a replacement water lter, see “Accessories.”
Replace the disposable water lter when indicated on the water
lter status display or at least every 9 months. If the ice making rate
decreases before the Replace Filter light illuminates, then replace the
lter.
1. Locate the water lter compartment in the right-hand side of the
control housing. See Step 3 in the “Install Water Filter” section.
2. Turn the water lter counterclockwise (to the left), and pull it
straight out of the compartment.
NOTE: There may be some water in the lter. Some spilling may
occur.
3. Install the replacement water lter by following steps 2 through 5
in the “Install the Water Filter” section.
Normal Sounds
Your new ice maker may make sounds that are not familiar to you.
Because the sounds are new to you, you might be concerned about
them. Most of the new sounds are normal. Hard surfaces such as
oors, walls and cabinets can make the sounds seem louder than
they actually are. The following describes the kinds of sounds that
might be new to you and what may be making them.
You will hear a buzzing sound when the water valve opens to ll
the water pan for each cycle.
Rattling noises may come from the ow of the refrigerant or the
water line. Items stored on top of the ice maker can also make
noises.
The high-efciency compressor may make a pulsating or high
pitched sound.
Water running over the evaporator plate may make a splashing
sound.
Water running from the evaporator plate to the water pan may
make a splashing sound.
As each cycle ends, you may hear a gurgling sound due to the
refrigerant owing in your ice maker.
You may hear air being forced over the condenser by the
condenser fan.
During the harvest cycle, you may hear a “thud” when the ice
sheet slides from the evaporator onto the cutter grid.
When you rst start the ice maker, you may hear water running
continuously. The ice maker is programmed to run a rinse cycle
before it begins to make ice.
If the ice maker is connected to a water supply pressure in
excess of 60 psi, you may hear a loud sound during water lling
associated with the ow of water through the inlet valve. Call
a licensed, qualied plumber to determine the best method to
reduce the supply water pressure (50 psi is recommended).
On/o
Clean Max Ice
Turned Uni t of Befo re C lea nin g
S ee Use a nd Care G ui de
A
C
B
D
E
F
A. Alignment pin
B. Unlocked symbol
C. Locked symbol
D. Cutout notch inside control housing
E. Arrow pointing to cutout notch
F. Arrow pointing to alignment pin
A
A. Alignment arrow aligned with locked symbol
18" (45.7 cm) models 15" (38.1 cm) models
Clean
Turn Unit o Befo re Cl
eaning
S ee Use a
nd Care Guide
Max Ice
A
A. Door


Produktspezifikationen

Marke: KitchenAid
Kategorie: Eiswürfelmaschine
Modell: KUIX335HBL

Brauchst du Hilfe?

Wenn Sie Hilfe mit KitchenAid KUIX335HBL benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Eiswürfelmaschine KitchenAid

Bedienungsanleitung Eiswürfelmaschine

Neueste Bedienungsanleitung für -Kategorien-