Kicker Front Row ZXDSP1 Bedienungsanleitung

Kicker Hi-Fi-Anlage Front Row ZXDSP1

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Kicker Front Row ZXDSP1 (15 Seiten) in der Kategorie Hi-Fi-Anlage. Dieser Bedienungsanleitung war für 13 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/15
Owner’s Manual | English
Manual del Propietario | Español
Procesador Digital de Señales de Canales Múltiples
Benutzerhandbuch | Deutsch
Mehrkanal-Digitalsignalprozessor
Manuel d’utilisation | Française
Processeur de Signal Numérique Multicanaux
ZXDSP1
6-Channel Digital Signal Processor
Front Row
2
Front Row Digital Signal Processor
Owner’s Manual
PERFORMANCE
Authorized KICKER Dealer:
Purchase Date:
Serial Number:
Operating Voltage DC 10–16V
Fuse 2A
Remote Out Current Capacity 100mA
DSP Specifi cations 50MHz ZX CPU
28/56-bit double-precision DSP
Signal-to-Noise Ratio 110dB (ref. 4V)
Frequency Response ± 0.2dB 10Hz22KHz
A/D-D/A Converters 24-Bit
THD+N 0.004%
Input Sensitivity 300mV-10V
Electronic Crossovers | 32-Step
Precision with Analog Control |
Selectable Slope of 12dB, 24dB,
or 48dB per Octave
FRONT: Variable HI-PASS, 10–5kHz
REAR/SURROUND: Variable HI-PASS, 10–500Hz
REAR/SURROUND: Variable LO-PASS, 50–5kHz
SUB: Variable LO-PASS, 40–160Hz
Subsonic Filter Variable, 10–80Hz @ 48dB/Octave
Subwoofer Phase Control Variable, 0–180°
KickEQ™ Variable, 0–15dB @ 45Hz
SHOCwave™ Variable Bass Restoration 0–12dB, 1 Octave Below Fundamental
Width 7-1/32” (178.5mm)
Depth 7-23/32” (196mm)
Height 1-19/23” (40.6mm)
Congratulations on purchasing the KICKER Front Row! The heart of your Front Row DSP processor is a
combination of state-of-the-art digital signal processing and user friendly analog controls that give you easy,
exible, and precise control of the audio in your car. The soul of your Front Row lies in the precision-designed,
user-adjustable features that transform your car into a studio and put you right there, Front Row, with your favorite
music! You are going to love how your music sounds with heart and soul.
INSTALLATION
Mounting: Choose a structurally sound location to mount your KICKER Front Row. Make sure there are no
items behind the area where the screws will be driven. Choose a location that allows at least 4” (10cm) of open
ventilation for the device. If possible, mount the Front Row in the climate-controlled passenger compartment. Drill
four holes using a 7/64” (3mm) bit and use the supplied #8 screws to mount the Front Row.
Wiring: Disconnect the vehicle’s battery to avoid an electrical short. Then, connect the ground wire to the Front
Row. Make the ground wire short, 24(60cm) or less, and connect it to a paint-and-corrosion-free, solid, metal
area of the vehicle’s chassis.
3
Pro Tip: To get the best
performance from your new
KICKER gear, use genuine
KICKER accessories and
wiring.
Do not remove the diagnostics
and fi rmware port cover. Do not
connect any devices. KICKER is
not responsible for any damage
to the Front Row or devices that
have been connected to this
port.
source unit
high-level speaker
outputs
to amplifi er
shield
+
core conductor KICKER ZISL
source unit high-level
speaker outputs
OR to amplifi er
The Front Row has dual input sensitivity differential RCA inputs which will receive either high or low level signals
from your car stereos source unit. A high-level signal can be run from the source unit’s speaker outputs to
the stereo RCA inputs on the end panel of the Front Row using the KICKER ZISL as shown on the next page.
Alternatively, the signal can be delivered to the Front Row using the low-level RCA outputs on the source unit.
Keep the audio signal cable away from factory wiring harnesses and other power wiring. If you need to cross this
wiring, cross it at a 90 degree angle.
Install a 2A fuse within 18” (45cm) of the battery and in-line with the power cable connected to your Front Row.
If you ever need to remove the Front Row from the vehicle after it has been installed, the ground wire should be
the last wire disconnected from the Front Row--just the opposite as when you installed it.
INPUT
GAIN
MIN MAX 10 500Hz
50 500Hz
40 160Hz0° 180°
10 500Hz
10 80Hz
MIN MAX
MIN MAX MIN MAX
MIN MAX
MIN MAX
OUTPUT
LEVEL
OUTPUT
LEVEL
LO-PASS
X-OVER
HI-PASS
X-OVER
HI-PASS
X-OVER
SUBSONIC PHASE
FREQUENCY
dB/OCT
LO-PASS
CLIP LIMITER
CLIP LIMITER
DC OFFSET/12V
CLIP LIMITER
OFF/ON
OFF/ON
OFF/LO
OFF/ON
TURN-ON
FREQUENCY
48/24/12
48/24/12
48/24/12
1X 10X
1X 10X
dB/OCT
dB/OCT
LO-PASS
X-OVER
OUTPUT
LEVEL
INPUT CLIP
POWER
FRONT
REAR/SURROUND
SUBWOOFER
INPUT
GAIN
INPUT
GAIN
INPUT CLIP
INPUT CLIP
REMOTE OUT
REMOTE IN
+12V
GND
remote turn-on
in and out
mount the Front Row to the
vehicle using the supplied screws
bare-metal
chassis ground
To vehicle
+12V constant
NOTE: Use 18 gauge
or larger wire for these
four connections.


Produktspezifikationen

Marke: Kicker
Kategorie: Hi-Fi-Anlage
Modell: Front Row ZXDSP1

Brauchst du Hilfe?

Wenn Sie Hilfe mit Kicker Front Row ZXDSP1 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Hi-Fi-Anlage Kicker

Bedienungsanleitung Hi-Fi-Anlage

Neueste Bedienungsanleitung für -Kategorien-