Kguard AR421-CKT001 Bedienungsanleitung

Kguard Sprachrekorder AR421-CKT001

Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Kguard AR421-CKT001 (81 Seiten) in der Kategorie Sprachrekorder. Dieser Bedienungsanleitung war fĂĽr 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/81
DVR with Cloud Technology
USER MANUAL
Aurora Series
Default user name: admin
Default password: 123456
ENGLISH
Preface
2
DVR User’s Manual
About this Manual
The material in this document is for informaon purpose and is subject to change without prior noce. We
made every eort to ensure that this user’s manual is accurate and complete. However, no liability is assumed
for any errors and omissions that may have occurred.
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protecon against harmful
interference in a residenal installaon. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instrucons, may cause harmful interference
to radio communicaons. However, there is no guarantee that interference will not occur in a parcular
installaon. If this equipment does cause harmful interference to radio or television recepon, which can be
determined by turning the equipment oî„« and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separaon between the product and receiver.
• Connect the product into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Declaraon of Conformity
This device complies with part 15 of the FCC Rules. Operaon is subject to the following two condions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired
operaon.
Copyright
Limitaon of Liability
• This publicaon is provided “AS IS” without warranty of any kind, either expressed or implied, including
but not limited to, the implied warranes of merchantability, tness for any parcular purpose, or non-
infringement of a third party’s rights.
• This publicaon may include technical inaccuracies or typographical errors. Changes may be made to the
informaon herein, at any me, for publicaon improvements and/or of the corresponding device(s).
Disclaimer of Warranty
In no event shall the supplier be liable to any party or any person, except for replacement or reasonable
maintenance of the product, for the cases, including but not limited to the following:
• Any damage or loss, including but without limitaon, direct or indirect, special, consequenal or exemplary,
arising out of or relang to the device;
• Personal injury or any damage caused by inapppropriate use or negligent operaon of the user;
• Unauthorized disassemble, repear or modicaon of the device by the user;
• Any problem, consequenal inconvenience, or loss or damage, arising out of combining the system with the
devices of a third party;
• Any claim or acon for damages, brought by any person or organizaon being a photogenic subject, due to
violaon of privacy with the result of pictures from a surveillance camera, including saved data, for some
reason, becomes public or is used for the purpose other than for surveillance.
ENGLISH
Preface
DVR User’s Manual
3
Safety Informaon
Warning
This is the symbol for indicang any potenal hazard,
risk or condion requiring special aenon.
The user needs to refer to the important operang
and maintenance or servicing instrucons.
Cauon
The lighng ash with an arrow head symbol, in an
equilateral triangle, is intended to alert the user.
There is dangerous “voltage” presence near by the
product’s enclosure which may be risk of person.
Safety Precauons
• Do not touch live electrical parts.
Electric shock can be avoided. Follow the
recommended pracces listed below. Faulty
installaon, improper grounding, and incorrect
operaon and maintenance of electrical equipment
are always sources of danger.
• Do not try to install equipment outdoor, during strong
wind and rain.
• Do not install or remove equipment outdoor, when
raining.
• Do not try to install or operate any equipment, during
a thunderstorm.
• Always ground all electrical equipment and the work
plaorm.
Prevent accidental electrical shocks. Connect power
source, control cabinets, and work plaorm to an
approved electrical ground.
• Always use the correct cable size.
Sustained overloading will cause cable failure and
result in possible electrical shock or î„®re hazard. Work
cable should be the same rang as the factory.
• Always keep cables and connectors in good condion.
Improper or worn electrical connecons can cause
short circuits and can increase the chance of an
electrical shock. Do not use worn, damaged, or bare
cables.
• Always avoid open-circuit voltage.
The added voltages increase the severity of electric
shock hazard.
• Always wear insulated gloves while you adjust
equipment.
Electric power should be turned oî„« and insulated
gloves should be worn when making any equipment
adjustment to assure shock protecon.
• Always wear protecve clothing such as long
sleeve shirts while you are installing or removing
equipment.
• Always wear high, snug ng shoes.
• Always wear clean clothes without grease or oil.
• Protect neighboring workers from exposure to arc
radiaon.
• Always wear long trousers or jeans while you are
installing or removing equipment.
• Always wear safety helmet or hard head and safety
shoes before work.
• Always keep the equipment in dry places.
• Always wear safety harnesses/belt while you work in
high places.
• Always wear dry clothing and avoid moisture and
water.
• Always wear Public Safety Vest, while you work at
night.
• Make sure all electrical connecons are ght, clean,
and dry.
• Make sure that you are well insulated to eliminate
electric stac charge.
• Always wear dry gloves, rubber-soled shoes, or stand
on a dry board or plaorm.
• Always follow recognized safety standards.
• Always wear correct eye, ear, and body protecon.
• Always have second person on-site, while you work in
dark, poor venlaon, or high places.
• Make sure that you are well protected against arc
î…‡ashes, mechanical injury, or other mishaps.
• Make sure that the polarity of wire is correct before
installing equipment.
• Always handle equipment with care.
• Do not block the venlaon of equipment.
• Do not put the magnec parts around the equipment.
• Do not put the objects on top of the equipment.

Produktspezifikationen

Marke: Kguard
Kategorie: Sprachrekorder
Modell: AR421-CKT001

Brauchst du Hilfe?

Wenn Sie Hilfe mit Kguard AR421-CKT001 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Sprachrekorder Kguard

Kguard

Kguard EL421-4HW212B Bedienungsanleitung

16 August 2024
Kguard

Kguard AR421-CKT001 Bedienungsanleitung

13 August 2024

Bedienungsanleitung Sprachrekorder

Neueste Bedienungsanleitung fĂĽr -Kategorien-

Hikvision

Hikvision iDS-6716NXI-I/16S (B) Bedienungsanleitung

12 Oktober 2024
Hikvision

Hikvision DS-7716NI-I4(B) Bedienungsanleitung

11 Oktober 2024
Hikvision

Hikvision DS-7204HQHI-K1/A Bedienungsanleitung

10 Oktober 2024
Audioline

Audioline VR-C10 Bedienungsanleitung

7 Oktober 2024
Toshiba

Toshiba DVS16-480-2T Bedienungsanleitung

7 Oktober 2024
Toshiba

Toshiba IPS8-500G Bedienungsanleitung

3 Oktober 2024
Dahua Technology

Dahua Technology X21A3E Bedienungsanleitung

30 September 2024
Dahua Technology

Dahua Technology X24A3L Bedienungsanleitung

28 September 2024
Dahua Technology

Dahua Technology X28A5S Bedienungsanleitung

22 September 2024
Zoom

Zoom H1 XLR Bedienungsanleitung

21 September 2024