Kenwood eXcelon KDC-X496 Bedienungsanleitung

Kenwood MP3-Player eXcelon KDC-X496

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Kenwood eXcelon KDC-X496 (44 Seiten) in der Kategorie MP3-Player. Dieser Bedienungsanleitung war für 22 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/44
Before reading this manual, click the button below to check the latest edition and the
modified pages.
IM344_Ref_K_en_01© 201 JVC KENWOOD 1 Corporation
KDC-X896
KDC-BT852HD
KDC-X496
KDC-452U
KMR-550U
CD-RECEIVER
INSTRUCTION MANUAL
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best performance from your new
CD-receiver.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space
provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or
service on the product.
Model KDC-X896/ KDC-BT852HD/ KDC-X496/ KDC-452U/ KMR-550U Serial number
US Residence Only
Register Online
Register your Kenwood product at www.Kenwoodusa.com
About the notation
Contents
Clicking “Contents shown at the upper left of each
page allows you to jump to the contents page.
Function setting procedure
For the procedure for selecting a setting item in the
Function setting mode, see the following example:
Example: Adjusting the contrast of the display
Enter the Function setting mode
Press and hold the Control knob.
“Function” is displayed.
Select the Contrast function item
Initial Settings
Tuner Settings
Play Mode
Clock&Date
DISP NEGA/POSI
Display Dimmer
Settings
DISP&ILLUMI
Contrast
Turn the Control knob to select “Settings”, and
then press the Control knob.
Next, turn the Control knob to select
“DISP&ILLUMI”, and then press the Control
knob.
Finally, turn the Control knob to select
“Contrast”, and then press the Control knob.
In this manual, the above operational
procedure is described as follows:
Select the Contrast function item
Select the following items using the
Control knob.
“Settings” > “DISP&ILLUMI” “Contrast>
Press the [ ] button to return to the previous
item.
• Clicking near the description of an operational
procedure displays this page, allowing you to confirm how
to use the Control knob.
Set the Contrast function
Turn the Control knob to select a value (1 - 30),
and then press the Control knob.
The previous item is displayed.
Exit the Function setting mode
Press and hold the [ ] button.
How to read this manual
Check the latest edition
Refer
Refer
2 | KDC-X896/ KDC-BT852HD/ KDC-X496/ KDC-452U/ KMR-550U English | 3
Contents
Before use 4
Component names 6
Audio adjustments 8
Audio control
Audio preset memory
Audio preset recall
iPod control operation 10
Music search
Alphabet search
Related search
Direct search
Skip search
Skip search ratio setting
Playback mode
Pandorinternet radio control 14
Listening to the Pandora® internet radio
Basic operations
Station search
Bookmark registration
Search and new station registration
Deletion of station
Pandora source control
Music disc/Audio le (CD or USB)
operation 18
Music search
Skip search
Playback mode
Direct music search
Tuner operation 20
Auto memory
Tuner setting
Direct access tuning
PTY (Program Type)
Program Type presetting
HD Radio™ tuner control 24
Auto memory
iTunes tagging
HD Radio tuner setting
Direct access tuning
Display settings 28
Selecting a display type
Selecting a text display
Information display setting
Illumination color selection
Display & Illumination setting
General operation 32
Adjusting the clock
Adjusting the date
Dual clock display
Clock & date display type setting
Auxiliary input display setting
Muting the audio upon reception of a phone call
Initial settings
Demonstration mode setting
Registering a Bluetooth device 38
About registration of a Bluetooth device
Simple Bluetooth device registration
Registering a Bluetooth device by operating it
Registering a Bluetooth device by operating this
unit
Registering a special Bluetooth device
Simple Bluetooth device selection
Selecting the Bluetooth device you wish to
connect
Deleting a registered Bluetooth device
Bluetooth device registration test
Operation for hands-free phoning 44
Receiving a call
Calling a number in the phone book
Dialing a number
Calling a number in the call log
Speed dialing (Preset dial)
Registering in the preset dial number list
During a call
Call waiting
Clearing the disconnection message
Making a call by voice dialing
Display of phone number types (categories)
Bluetooth audio device operation 50
Before use
Basic operations
Playback mode
Switching between Bluetooth devices
Bluetooth setup 52
Registering the PIN code
Downloading the phone book
Displaying the firmware version
Bluetooth detail setting
SMS (Short Message Service) 56
Displaying the SMS
Downloading the SMS
SMS reply setting
Return message setting
Creating an original message
SiriusXM Vehicle Connect Tuner Control
(optional tuner and service required) 60
Before use
Basic operations
Category and channel search
Channel preset memory
Preset tuning
Channel scan
Direct access tuning
Seek mode setting
iTunes tagging
Parental Lock setting
Clearing the Parental Lock setting
Setting Parental Lock for Mature contents
Parental Lock pass code setting
Content alert
Content alert setting
Editing a Content alert item
Delete a Content alert item
Instant Replay
Channel skip setting
Clearing the channel skip setting
SiriusXM tuner setting
Remote control (Optional accessory)
setup 72
Registering a remote control ID
Delete the remote control ID
Basic operation of remote control 74
General control
On Tuner source
On HD Radio tuner source
On CD/Audio file source
On iPod source
On Pandora internet radio source
On SiriusXM tuner source
Hands-free phone control
Appendix 76
Troubleshooting guide 78
Specifications 82
4 | KDC-X896/ KDC-BT852HD/ KDC-X496/ KDC-452U/ KMR-550U English | 5
Contents
Before use
Before using the KDC-X896, KDC-BT852HD,
KDC-X496, or KDC-452U for the first time
This unit is factory-set to operate in the
Demonstration mode initially.
When using this unit for the first time, cancel
the Demonstration mode. Refer to <Exiting the
Demonstration mode> (page 4) in Quick Start
Guide.
2 WARNING
To prevent injuries or a fire, take the
following precautions:
• Stop the car before operating the unit.
• To prevent a short circuit, never put or leave any
metallic objects (such as coins or metal tools) inside
the unit.
¤ CAUTION
• Adjust the volume so that you can hear the sound
outside the car. Driving with the volume too high
may cause an accident.
• Wipe off the dirt on the panel with a dry silicon or
soft cloth.
Failure to observe this precaution may result in
damage to the monitor or unit.
Cleaning the connector
The unit may not function properly if the connectors
between the unit and faceplate are dirty. Detach the
faceplate and clean the connector with a cotton swab
gently, being careful not to damage the connector.
Connector
Condensation
When the car is air-conditioned, moisture may collect
on the laser lens. This may cause disc read errors. In
this case, remove the disc and wait for the moisture
to evaporate.
Notes
• If you experience problems during installation,
consult your Kenwood dealer.
• When you purchase optional accessories, check with
your Kenwood dealer to make sure that they can
work with your model and in your area.
• Characters that conform to ISO 8859-1 can be
displayed.
• The illustrations of the display and panel appearing
in this manual are examples used to explain more
clearly how the controls are used. Therefore, what
appears on the display in the illustrations may differ
from what appears on the display on the actual
equipment, and some of the images on the display
may be inapplicable.
About the discs used with this unit
• This unit can only play the CDs with .
• The following discs cannot be used:
- A discs that is not round
- A discs with coloring on the recording surface or a
disc that is dirty
- A recordable/rewritable disc that has not been
finalized (For the finalization process, refer to
the instruction manual that came with your disc
writing software or your disc recorder.)
- An 8 cm (3 inch) disc (An attempt to insert using
an adapter can cause malfunction.)
Handling discs
• Do not touch the recording surface of the disc.
• Do not stick tape etc. on the disc, or use a disc with
tape stuck on it.
• Do not use any accessories for the disc.
• Do not use any solvents to clean discs. Use a dry
silicon or soft cloth.
• Clean the disc by moving the cloth outward from
the center of the disc.
• When removing a disc from this unit, pull it out
horizontally.
• If the center hole or outside rim of a disc has burrs,
remove them before inserting a disc.
How to reset your unit
If the unit fails to operate properly, press the Reset
button. The unit returns to the factory settings when
the Reset button is pressed.
Reset button
About the remote controls of KMR-550U
A maximum of 2 remote controls (KCA-RC107MR or
KCA-RC55MR; optional accessory) can be used with
the KMR-550U. For details on how to use the remote
control, refer to the operation manual attached to it.
When using the remote control with this unit, you
should register the remote control ID. For details, refer
to <Registering a remote control ID> (page 72).


Produktspezifikationen

Marke: Kenwood
Kategorie: MP3-Player
Modell: eXcelon KDC-X496

Brauchst du Hilfe?

Wenn Sie Hilfe mit Kenwood eXcelon KDC-X496 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung MP3-Player Kenwood

Bedienungsanleitung MP3-Player

Neueste Bedienungsanleitung für -Kategorien-