Kenwood Excelon CA-GRL14RG Bedienungsanleitung

Kenwood Nicht kategorisiert Excelon CA-GRL14RG

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Kenwood Excelon CA-GRL14RG (2 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 15 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best performance from your new product.
© 2023 JVCKENWOOD Corporation
CA-GRL14RG
METAL MESH SPEAKER GRILLES DESIGNED AND ENGINEERED FOR
2015+ HARLEY-DAVIDSON® ROAD GLIDE® MOTORCYCLES
INSTRUCTION MANUAL
JVCKENWOOD Corporation
Important Notes
©2023 JVCKENWOOD Corporation. All Rights Reserved. KENWOOD® and eXcelon®
are registered trademarks of JVCKENWOOD Corporation. Harley-Davidson®, Electra
Glide®, Road Glide®, Street Glide®, Ultra Classic®, Tri Glide®, CVO™, Screamin Eagle®
and Tour-Pak® are trademarks or registered trademarks of Harley-Davidson, Inc. and/
or its affiliates and if used or implied are for reference only. There is no affiliation
between Harley-Davidson, Inc. and/or its aliates and JVCKENWOOD Corporation
and/or its aliates. All other trademarks are the property of their respective owners.
Specications subject to change without notice.
Metal Mesh Speaker Grilles Installation Instructions
Installation procedure
1. Each factory grille will need to be removed from the inner fairing by prying up on
them. Start with your ngers, but if you must use a tool, use something with a 90° end,
being extra careful not to scratch your inner fairing.
2. On the back of each stock grille, you will see a rubber gasket and 2 white clips. These
gaskets and clips need to be removed from the factory grilles and re-installed on the
KENWOOD grilles.
3. Once the gaskets and clips are installed onto the new grilles, simply press the new
grilles back onto your inner fairing.
NOTE: The factory clips in step 2 must be removed
carefully. Using your thumbnails or a at edge under
each side, gently pry the 2 ends apart (see Fig 1.1)
and pull up to release each clip from the stock grille.
If you put a flat edge under one end only, the clip
cannot release and could break.
Fig 1.1
For updated information (the latest Instruction Manual, etc.),
please visit the following website:
https://manual.kenwood.com/en_contents/search/
NOTE: On the back side of the grilles, you will see tabs that are part
of the metal mesh which are folded over to secure the mesh to the
plastic trim ring. Folding these tabs back up allows the ring and mesh
to separate easily for paint etc. For custom applications, the metal
mesh is thick enough that it should not warp during powder coating,
polishing, chroming, or other similar processing.


Produktspezifikationen

Marke: Kenwood
Kategorie: Nicht kategorisiert
Modell: Excelon CA-GRL14RG

Brauchst du Hilfe?

Wenn Sie Hilfe mit Kenwood Excelon CA-GRL14RG benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Kenwood

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-