Kenwood DDX8901HD Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Kenwood DDX8901HD (64 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 9 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/64
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best performance from your new DVD-receiver.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial
numbers whenever you call upon your Kenwood dealer for information or service on the product.
Model DDX8901HD/DDX7701HD/DDX7071BT/DDX5901HD Serial number
US Residents Only
Register Online
Register your Kenwood product at www.Kenwoodusa.com
LVT2510-001A (KN/RN)© 2014 JVC KENWOOD Corporation
DDX8901HD
DDX7701HD
MONITOR WITH DVD RECEIVER
INSTRUCTION MANUAL
DDX7071BT
DDX5901HD
ENGLISH 3
For DDX8901HD/DDX7701HD/DDX5901HD:
V CAUTION
Use of controls or adjustments or performance
of procedures other than those specified herein
may result in hazardous radiation exposure. In
compliance with Federal Regulations, the following
are reproductions of labels on, or inside the product
relating to laser product safety.
JVCKENWOOD Corporation
2967-3, ISHIKAWA-MACHI, HACHIOJI-SHI, TOKYO,
JAPAN
THIS PRODUCT COMPLIES WITH DHHS RULES
21CFR SUBCHAPTER J IN EFFECT AT DATE OF
MANUFACTURE.
Location : Top plate
For DDX8901HD/DDX7701HD/DDX5901HD:
FCC WARNING
This equipment may generate or use radio
frequency energy. Changes or modifications to this
equipment may cause harmful interference unless
the modifications are expressly approved in the
instruction manual. The user could lose the authority
to operate this equipment if an unauthorized
change or modification is made.
FCC NOTE
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment may cause harmful interference to
radio communications, if it is not installed and used
in accordance with the instructions. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct
the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment to an outlet on a circuit
different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV
technician for help.
V Cautions on the monitor:
• The monitor built into this unit has been
produced with high precision, but it may have
some ineffective dots. This is inevitable and is not
considered defective.
• Do not expose the monitor to direct sunlight.
• Do not operate the touch panel using a ball-point
pen or similar tool with a sharp tip.
Touch the buttons on the touch panel with your
finger directly (if you are wearing a glove, take it
off).
• When the temperature is very cold or very hot...
– Chemical changes occur inside, causing
malfunction.
– Pictures may not appear clearly or may move
slowly. Pictures may not be synchronized with
the sound or picture quality may decline in such
environments.
For safety...
• Do not raise the volume level too much, as this
will make driving dangerous by blocking outside
sounds, and may cause hearing loss.
• Stop the car before performing any complicated
operations.
Temperature inside the car...
If you have parked the car for a long time in hot or
cold weather, wait until the temperature in the car
becomes normal before operating the unit.
How to reset your unit
DDX8901HD/DDX7701HD/DDX7071BT
DDX5901HD
If the unit fails to operate properly, press the Reset
button. The unit returns to factory settings when
the Reset button is pressed (except the registered
Bluetooth devices).
BEFORE USE
4
INITIAL SETTINGS
Initial s etup
When you power on the unit for the first time or
reset the unit, the initial setting screen appears.
• You can also change the settings on the <Setup>
screen. (Page52)
1
*
<Language>
(Page54)
Select the text language used for
on-screen information.
• Set <GUI Language> to
display the operation buttons
and menu items in the
selected language ( : [Local]
initially selected) or English
( ).[English]
<Angle>*
(Page7)
Adjust the panel angle.
<R-CAM
Interrupt>
(Page53)
Select when connecting [ON]
the rear view camera.
<Panel
Color>
(Page49)
Select the color of the buttons
on the monitor panel.
2 Finish the procedure.
The <TOP MENU> screen is displayed.
* Only for D DX8901HD/DDX7701HD/DDX7071BT .
Activating the security function
You can activate the security function to protect
your receiver system against theft.
1 Display the screen.<TOP MENU>
On the source control screen:
2 Display the setting screen.<System>
• Press [ ] repeatedly to change the page on K
the menu screen.<System>


Produktspezifikationen

Marke: Kenwood
Kategorie: Nicht kategorisiert
Modell: DDX8901HD

Brauchst du Hilfe?

Wenn Sie Hilfe mit Kenwood DDX8901HD benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Kenwood

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-