Kathrein UFS 931sw Bedienungsanleitung
Kathrein
Digitaldecoder
UFS 931sw
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Kathrein UFS 931sw (96 Seiten) in der Kategorie Digitaldecoder. Dieser Bedienungsanleitung war für 26 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/96
Operating Manual Englisch
UFS 931sw/HD+
2
Dear customer,
this operating manual is intended to help you make the fullest use of the extensive range of functions
offered by your new HD+ satellite receiver.
We have tried to make the operating instructions as easy as possible to understand, and to keep them
as concise as possible. To help you understand particular specialist terms that cannot be translated,
we have added a short glossary at the end of the manual.
If you will not be using your receiver for a longer period, you should use disconnect it from the mains to
save energy. For shorter breaks, you can use the remote control to switch the receiver to standby, which
uses only a minimal amount of energy.
We wish you good reception and hope you will enjoy using your new HD+ receiver.
Your
KATHREIN team
Preface
3
The difference between PAL and HDTV
High-resolution TV is characterised by a signifi cantly higher number of picture lines on the TV set. The
usual European standard PAL achieves a resolution of 576 lines vertically and 720 lines horizontally.
The high-resolution TV provides an impressive resolution, up to fi ve times higher than the usual
PAL standard TV, and hence delivering more detail sharpness and responsiveness.
A HDTV picture can contain up to fi ve times as many picture points, that is, approximately 2 million pixels
compared to a conventional PAL picture with only approximately 400,000 pixels.
Worldwide there are currently two HDTV standards, based on the two formats 1080i and 720p. The two
standards differ in the number of picture lines and in the transmission procedure. To the human eye, the
difference between the two HDTV standards is hardly perceptible; whereas in comparison to the PAL
system, moving pictures look much more dynamic in HDTV. Transmission technology and reception
equipment will be able to handle both standards in the future.
Difference Between PAL and HDTV
PAL 720 x 576
720p 1280 x 720
1080i 1920 x 1080
5
List of Contents
Main Menu - Security ................................. 62
Main Menu - Settings ................................. 64
Video Settings ........................................... 64
Audio Settings ........................................... 66
Menu Settings ........................................... 67
Miscellaneous ........................................... 68
CA module ................................................. 70
CI (Common Interface) ..................................... 70
Common interface expert settings .................... 71
LNB Settings ............................................. 71
Main Menu - Service Menu........................ 72
Sat Finder .................................................. 72
Channel Information .................................. 73
Smartcard (HD+ Card) .............................. 73
PIN Change (HD+ Card) ........................... 73
System Information (Update Software) ..... 73
Update Software ............................................... 74
Restore Factory Settings ........................... 76
Main Menu - Language .............................. 77
Troubleshooting ........................................ 78
Technical Appendix ................................... 79
Alphanumeric entries ................................ 79
Advanced connection example ................. 80
Technical specifications ............................. 81
Sat IF connection examples ...................... 82
Single systems ................................................. 82
Community antenna network systems
(4 x Sat IF) ........................................................ 82
Community antenna network systems
(8 x Sat IF), multi-feed ...................................... 83
Community antenna network systems
(16 x Sat IF), multi-feed .................................... 83
Single cable systems ........................................ 84
Short technical guide ................................ 86
Service ........................................................ 89
General Terms and Conditions of
Business for HD+ ...................................... 90
For your notes ........................................... 94
6
Safety Instructions - Important Notes
Mains cable
Make sure that the mains cable
(power supply cable) is not damaged.
Units with a damaged mains cable
must be disconnected from the
mains (unplugged at the mains
power socket) and repaired by an
electrical specialist before being
used. Only use the power pack
supplied (if available)!
Risk of fatal injury due to electric
shock!
Danger!
Cleaning
Disconnect the mains plug before
cleaning the unit. Only use a dry
cloth for cleaning and only clean
the outer surface. Never open the
casing of the unit.
Touching the parts inside the unit
carries a risk of death due to electric
shock!
Playing children
Make sure that children do not
push any objects into the ventilation
slots.
Risk of fatal injury due to electric
shock!
Earthing
The antenna system must
be earthed as specifi ed or
equipotentially bonded.
EN 60728/11 and any national
regulations must be complied with.
Risk of voltage surges due to
lightning strikes!
Power supply voltage
Only operate the unit at the specifi ed
mains voltage (indicated on the
rear of the unit or on the external
power pack). The unit may only be
connected to the mains and switched
on once it has been connected to
the antenna and to the TV set or
the cable network and PC.
If the mains voltage is too high,
there is a risk of fi re!
Moisture, direct sunlight, heat,
naked fl ames
Protect the unit against moisture,
dripping and splashed water (do
not place any fi lled objects such
as vases on top of the unit). Do not
place the unit close to a heater or
expose it to direct sunlight and do
not operate it in damp locations.
Only use the unit in a moderate
climate, not in tropical conditions!
Place no naked fl ames such as
candles on top of the unit!
There is a risk of fi re!
Ventilation
The heat generated in this unit is
adequately dissipated. However,
the unit should never be installed
in a cupboard or on shelves with
inadequate ventilation. Never cover
the cooling slots on the unit (e.g.
with other equipment, magazines,
tablecloths, clothing or curtains)!
Batteries
If your unit was supplied with
batteries (e.g. for the remote control),
take care that the batteries are
not exposed to excessively high
temperatures, direct sunshine or
fi re. Exchange the batteries only
with types that are identical or
equivalent. Otherwise the batteries
and also the remote control may
be damaged. Comply also with the
safety instructions stated on the
batteries:
There is a risk of explosions!
Warning!
Warning!
Warning!
These two pages contain important information about operation, installation location and connection of the
unit. Read these instructions carefully before setting up the device.
Do not
cover
7
Safety Instructions - Important Notes
Periods of extended absence,
thunderstorms, mains socket
accessibility
In order to disconnect the unit from
the mains completely, the mains
plug must be unplugged from the
wall socket! Therefore install the unit
close to a mains socket and make
sure that socket is accessible at all
times, so that you can disconnect
the unit from the mains if necessary.
If you are away for an extended
period, and during thunderstorms,
always switch the unit off at the
mains and unplug it from the socket.
This also applies to the other
equipment connected to the unit.
Isolation from the cable network is
also recommended. Note any timer
programming (receiver) and turn the
unit on again promptly before the
recording time.
Installation location
All electronic equipment generates
heat, The temperature rise of
this unit does however lie within
the permissible range. Sensitive
furniture surfaces and veneers may
become discoloured by the effects
of constant heat over time. The feet
of the unit can also cause colour
changes to treated furniture surfaces.
If necessary, place the unit on a
suitable stable and at base!
Repairs
Ensure that any repairs to your
unit are carried out by quali ed
personnel. Opening the unit and
attempting to repair it yourself
voids all warranty claims!
Improper work on the unit may
jeopardise the electrical safety of
the unit.
The manufacturer accepts no
liability for accidents caused by the
user opening the casing of the unit!
Connections
Incorrect wiring of the connections
can lead to malfunctions or defects
on the unit!
Important!
Do not place any objects on top of
the unit. Unless stated to the contrary
in the “Connection and Set-Up” and
“Installation” sections in the manual
supplied, maintain a clearance of at
least 10 cm above the unit, 2 cm to
either side and 5 cm behind the unit,
to allow unobstructed dissipation of
the heat generated.
There is a risk of fi re!
Electronic equipment is not domestic
waste - it must be disposed of
properly in accordance with directive
2002/96/EC OF THE EUROPEAN
PARLIAMENT AND THE COUNCIL
dated 27 th January 2003 concerning
used electrical and electronic
appliances.
At the end of its service life, take this
device for disposal at a designated
public collection point.
Spent batteries are special waste!
Do not throw spent batteries into
your domestic waste; take them to a
collection point for spent batteries!
Die HD+ Karte ist
ausschließlich für die
Nutzung in der Bundesrepublik
Deutschland bestimmt.
the Federal Republic
of Germany.
The HD+ Card is only
intended to be used in
8
Make sure that the ventilation slots on the unit are not covered in any way.
Otherwise the unit may overheat.
There is a risk of fi re!
The channels available on the satellites and transponders are subject to continual change. If changes
do occur, the new channels have to be set on the receiver because the factory preset programming
corresponds to the status on the date of manufacture. The information for these settings can be found
on the Internet or in relevant magazines.
Your receiver was equipped in the factory with the latest software version at that time. We are, however,
constantly working on adapting the software to the wishes of our customers and to developments in
technology. Further information on this can be found in the chapters “Main Menu - Service Menu”,
“System information - (software update)”.
Please keep the original packaging in case you need to return the product at any time! The receivers
are fragile due to their construction and are only adequately protected by the original packaging. If the
receiver is not shipped correctly the guarantee/warranty on it will be voided.
Any modifi cations to the receiver software, or the use of applications not provided by Kathrein,
will invalidate the warranty! You will have to bear the costs yourself for shipping and repairing any
receiver that requires attention due to modifi cations to the software and use of applications other than
those provided by Kathrein!
Therefore exclusively use only software and applications provided by Kathrein for your receiver. These
are available by downloading from the satellite or from our Internet pages (www.kathrein.de).
Safety Instructions - Important Notes
The power supply unit and the receiver are for indoors use
only! Use the power supply unit supplied with the receiver.
The use of any power supply unit may damage the receiver.
There is a risk of fi re!
The original power supply unit may differ from that illustrated
9
You must not disconnect the receiver from the mains while it is in operation!
This can lead to a loss of data and corruption of the software.
This unit makes use of legally protected technologies, which are protected by patents in the USA and
also by other intellectual property rights in other countries.
KATHREIN-Werke KG has obtained licences from Audio MPEG Inc. and Societa‘ Italiana per lo sviluppo
dell‘elettronica, S.I.SV.EL, S.P.A to use these technologies. These licences carry certain restrictions,
which apply also to you as the customer. Accordingly this unit may only be used by the end customer
for private non-commercial purposes and for the licensed content. It may not be used for commercial
purposes. The use of products or processes that are sold or used with this unit is not included in this
statement. The use of reverse engineering is not permitted in respect of the licensed technologies,
nor is disassembly.
The information in this operating manual was correct at the time of going to print. We reserve the right
however to make changes at any time and without prior notice. If new software is released for your
receiver, and this affects the information in the operating manual (e.g. changes to the menus and/
or functions), if we believe it necessary we will make available a new operating manual for download
under “www.kathrein.de”.
Make a note of the receiver's basic settings (these are set during the fi rst installation), so you can
restore them if necessary!
The term DiSEqC™ used in this operating manual is a registered trade mark of the European
Telecommunication Satellite Organisation (EUTELSAT).
Before you switch disconnect the receiver from the mains, you must switch it to the standby mode by
pressing the stand-by button (
) on the remote control. In standby mode, any changed or new
data that is broadcast will be saved by the receiver. As soon as the receiver is in the standby mode,
it can be disconnected from the mains at any time.
Manufactured under licence from Dolby Laboratories. “Dolby” and the
double-D symbol are registered trademarks of Dolby Laboratories.
HDMI, the HDMI logo and High-Defi nition Multimedia Interface are trademarks
or registered trademarks of HDMI Licensing LLC.
®
Safety Instructions - Important Notes
12
Connection and Set-Up
If you do not know the confi guration of your satellite reception system, contact
your specialist dealer.
Connect the Sat IF inputs on the receiver to the satellite reception system.
Use coaxial cable with an F standard connector (see illustration on right).
HDMI
TV
Scart
Connect the satellite receiver (HDMI or alternatively TV Scart socket) and the TV set using an HDMI or
Scart cable (see “Connection example”).
Conventional
DiSEqC™ system
Produktspezifikationen
| Marke: | Kathrein |
| Kategorie: | Digitaldecoder |
| Modell: | UFS 931sw |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Kathrein UFS 931sw benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Digitaldecoder Kathrein
14 September 2024
11 August 2024
7 August 2024
6 August 2024
3 August 2024
1 August 2024
30 Juli 2024
27 Juli 2024
25 Juli 2024
23 Juli 2024
Bedienungsanleitung Digitaldecoder
- Digitaldecoder Genius
- Digitaldecoder Manta
- Digitaldecoder Fagor
- Digitaldecoder TechniSat
- Digitaldecoder Denver
- Digitaldecoder ECG
- Digitaldecoder EMOS
- Digitaldecoder König
- Digitaldecoder Thomson
- Digitaldecoder Trevi
- Digitaldecoder Telestar
- Digitaldecoder JVC
- Digitaldecoder Nokia
- Digitaldecoder Megasat
- Digitaldecoder Strong
- Digitaldecoder Marmitek
- Digitaldecoder Xoro
- Digitaldecoder AVerMedia
- Digitaldecoder Edision
- Digitaldecoder Humax
- Digitaldecoder Monacor
- Digitaldecoder Conceptronic
- Digitaldecoder Vu+
- Digitaldecoder Engel Axil
- Digitaldecoder Synology
- Digitaldecoder Hikvision
- Digitaldecoder Emtec
- Digitaldecoder Formuler
- Digitaldecoder Sitecom
- Digitaldecoder Sunstech
- Digitaldecoder AMX
- Digitaldecoder Triax
- Digitaldecoder ACTi
- Digitaldecoder Best Buy
- Digitaldecoder Amiko
- Digitaldecoder Dahua Technology
- Digitaldecoder Gefen
- Digitaldecoder Atlantis Land
- Digitaldecoder Hanwha
- Digitaldecoder KanexPro
- Digitaldecoder Axis
- Digitaldecoder Crestron
- Digitaldecoder Extron
- Digitaldecoder QFX
- Digitaldecoder Atlona
- Digitaldecoder WyreStorm
- Digitaldecoder Tams Elektronik
- Digitaldecoder Televes
- Digitaldecoder Matrox
- Digitaldecoder Blustream
- Digitaldecoder C2G
- Digitaldecoder ADB
- Digitaldecoder Infomir
- Digitaldecoder Telesystem
- Digitaldecoder TELE System
Neueste Bedienungsanleitung für -Kategorien-
12 Oktober 2024
8 Oktober 2024
29 September 2024
17 September 2024
12 September 2024
6 September 2024
6 September 2024
5 September 2024
5 September 2024
5 September 2024