Kathrein EXR 2508 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Kathrein EXR 2508 (5 Seiten) in der Kategorie Digitaldecoder. Dieser Bedienungsanleitung war für 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/5
1 / 8
Cascadable multi-switch for distribution of four satel-
lite levels and terrestrial signals across multiple
TV/Receiver
Only one downlink per TV/Receiver needed
(two for twin TV/Receiver)
Independent selection of horizontal/vertical, low/high,
for each TV/Receiver
Switchable via the coaxial cable with 14/18 V and
0/22 kHz signal frequency
Integral amplifi er for low attenuation in satellite signal
band
Integral pre-emphasis to equalise cable attenuation
Terrestrial signals also receivable even when sat
TV/Receiver switched o
Terrestrial band: 5-862 MHz, passive
High degree of insulation between outputs
Multi-switches EXR 2558 and EXR 2554, together with
single-cable multi-switches of the EXD and EXE series
can be combined
Up to eight multi-switches can be cascaded
For indoor installation
EXR 2508
Multi-switches for eight ports with power supply unit
for LNB power feed
NCF 18
Low power consumption based on high-e ciency
short-circuit-proof switch-mode power supply unit
Kathrein Power-Saving:
The LNB power feed is switched o as soon as there
are no longer any TV/Receiver active on the EXR 2508
or in the cascade. This function can be deactivated,
for instance if loop-through multi-switches without
Kathrein Power-Saving as used in the cascade
LNB-Fernspeisung über den Eingang horizonal low.
Signalisierung Kathrein-Power-Saving über den Stamm
„vertikal low. All other inputs are voltage-free
Sat-IF distribution system (4 x sat-IF)
Multi-switch
Features
EXR 2554 and EXR 2558
Loop-through multi-switch for system extension with
four or eight connections each
Kathrein Power-Saving:
As soon as there are no longer any TV/Receiver active,
a signal is generated at the last multi-switch via the
„vertical low“ trunk. This signal then switches the LNB
power supply o .
EXR 2508 20510095
EXR 2554 20510097
EXR 2558 20510096
2 / 8
Technical data
Type EXR 2508 EXR 2554 EXR 2558
Order no. 20510095 20510097 20510096
Subscriber connections 8 4 8
Inputs 1 x terr. 4 x sat-IF 1 x terr. 4 x sat-IF 1 x terr. 4 x sat-IF
Frequency ranges MHz 5-862 950-2150 5-862 950-2150 5-862 950-2150
Through loss dB - - 3,5
1,0 → 2,5 1)
3,5
1,0 → 2,5 1)
Connection loss ¹)dB 15 → 17 5 → 0 18 → 20 5 → 0 18 → 20 5 → 0
Horizontal/vertical isolation dB - 25 - 25 - 25
Subcriber decoupling dB 40 25 40 25 40 25
Trunk decoupling dB - - - 40 - 40
Max. output level 2) dBµV - 109 - 109 - 109
Vertical/holizontal input control V 12-14,5/16-19
Low/High band control kHz 0/22
Current consumption per subscriber mA 20
Nominal input voltage V 230 - -
Rated input voltage range V 198-253 - -
Nominal input power (800/150/0 mA load) W 18/4,7/1,7 - -
Input voltage on DC input 3) V - 18 -
Max. total remote feed current 3) mA 800 - -
Max. remote feed current per trunk mA - 1000 1000
Permissible ambient temperature °C - 20 to + 50
Connections F connectors
Dimensions (W x H x D) mm 215 x 148 x 43 112 x 148 x 44 159 x 148 x 43
Packing unit/weight pc./kg 1 (10)/0,65 1 (10)/0,35 1 (10)/0,45
¹)
Frequency-dependent attenuation
²) SAT to EN 60728-3, 35 dB IMA
³) Via horizontal low input
Kathrein Power Saving
If an EXR 2508 is operated as a stand-alone device or is operated in conjunction with other multi-switches which bear
the Kathrein Power-Saving logo, Kathrein Power-Saving can be activated when the stand-by switch is set toON“. If a TV/
Receiver is included in the cascade, the LNB is supplied from the last multi-switch.
Multi-switches without Kathrein Power-Saving do not generate any signal to the last multi-switch. In order to
ensure an uninterrupted power supply to the LNB, the stand-by switch must be set to „OFF“.
Please nd the technical data from plug-in power supply unit NCF 18 on www.kathrein-ds.com.
3 / 8
Installation example (symbolic representation)
2
T
err.
V
high
H
high
V
low
H
low
1
4
3
Power
Saving
2
err.
high
high
low
low
1
4
3
Power
Saving
2
T
err.
V
high
H
high
V
low
H
low
1
4
3
6
5
8
7
18V
Power
OFF
Saving
2
T
err.
V
high
high
V
low
low
1
4
3
6
5
8
7
Power
Saving
ESD..
ESC..
ESD..
ESC..
KAZ 11/12
UAS
584
(585)
KA Z 12
21810002
A
KAZ 11
507205
A
T
err.
V
high
H
high
V
low
H
low
- 4dB
- 4dB
- 4dB
- 4dB
- 4dB
- 4dB
- 4dB
- 4dB
- 4dB
- 4dB
EBX 2520
2
T
err.
V
high
high
V
low
low
1
4
3
Power
Saving
3x EXR 2554
EXR 2558 | EXR 2508
Hereby, KATHREIN Digital Systems GmbH declares that the devices discribed in this document
are in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the
following internet address: www.kathrein-ds.com
SIMPLIFIED EU DECLARATION OF CONFORMITY


Produktspezifikationen

Marke: Kathrein
Kategorie: Digitaldecoder
Modell: EXR 2508

Brauchst du Hilfe?

Wenn Sie Hilfe mit Kathrein EXR 2508 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Digitaldecoder Kathrein

Bedienungsanleitung Digitaldecoder

Neueste Bedienungsanleitung für -Kategorien-