Kathrein UFS 651si Bedienungsanleitung

Kathrein Digital-Decoder UFS 651si

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Kathrein UFS 651si (80 Seiten) in der Kategorie Digital-Decoder. Dieser Bedienungsanleitung war für 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/80

Operating manual

DVB Satellite Receiver

UFS 651si/sw

PREFACE

Dear customer,

This operating manual is intended to help you make the fullest use of the extensive range of functions oﬀered

by your new satellite receiver.

We have tried to make the operating instructions as easy as possible to understand, and to keep them as concise

as possible. To help you understand particular specialist terms that cannot be translated, we have added a short

glossary at the end of the manual.

The power switch is an environmentally friendly feature. If you will not be using your receiver for an extended

period, you should use the power switch to disconnect it from the power supply and save energy. For shorter

breaks, you can use the remote control to switch the receiver to standby, which uses only a minimal amount

of energy.

We wish you good reception and much pleasure using your new DVB satellite receiver.

Your

KATHREIN team

The channels available on the satellites and transponders are subject to continual change. If changes do

occur, the new channels have to be set in the receiver because the factory preset programming corresponds

to the status on the date of manufacture. The information for these settings can be found on the Internet or

in relevant magazines.

Your receiver is equipped in the factory with the latest software version at that time. We are, however, constantly

working on adapting the software to the wishes of our customers and to developments in technology. The

“Service Menu” section provides more information on this.

The information in this operating manual was correct at the time of going to press.

We reserve the right however to make changes at any time and without prior notice. If new software is

released for your receiver, and this aﬀects the information in the operating manual (e.g. changes to the

menus and/or functions), if we believe it necessary we will make available a new operating manual for

download under “www.kathrein.de”.

Please keep the original packaging in case you need to return the product at any time.

If the product is not properly packed, the warranty claim is invalidated.

Please make a note of your receiver’s default setting (are conﬁ gured during the ﬁ rst installation) so that

you can refer to it at any time!

Before you switch oﬀ your receiver with the mains switch, you must ﬁ rst switch it into stand-by mode by

pressing the stand-by button on your remote control. This ensures that modiﬁ ed and new data are saved to

the receiver. As soon as the receiver is in stand-by mode, it can be switched oﬀ completely using the on/off

switch on the receiver front panel. Do not press the on/oﬀ button when the receiver is in operation!

This can lead to loss of data or damage to software.

The receiver conforms to the latest European directive for energy using products (EUP) and has (by itself)

a power consumption of only 5 W in operational mode (excluding Sat lead). The 15 W power consumption

mentioned on the receiver rear panel is due to the necessity to power the satellite reception system’s LNB

and or multi-switch. This 15 W value is normally not reached, but may do so in the most disadvantageous

case.

The term DiSEqC™, which appears in this user manual, is a registered trademark of the European

Telecommunication Satellite Organization (EUTELSAT).

IMPORTANT INFORMATION

INFORMATION ON AUDIO MPEG INC. AND S.I.SV.EL, S.P.A:

This unit makes use of legally protected technologies, which are protected by patents in the USA and also by

other intellectual property rights in other countries. KATHREIN-Werke KG has obtained licences from Audio

MPEG Inc. and Societa‘ Italiana per lo sviluppo dell‘elettronica, S.I.SV.EL, S.P.A to use these technologies.

These licences carry certain restrictions, which apply also to you as the customer. Accordingly this unit may

be used by the end customer only for private non-commercial purposes and for the licensed content. It may

not be used for commercial purposes. The use of products or processes that are sold or used with this unit

is not included in this statement. The use of reverse engineering is not permitted in respect of the licensed

technologies, nor is disassembly.

Manufactured under license from Dolby Laboratories. Dolby and the double-D

symbol are trademarks of Dolby Laboratories.

HDMI, the HDMI logo and High-De nition Multimedia Interface are either trade-ﬁ

marks or registered trademarks of HDMI Licensing LLC.

Produktspezifikationen

Marke:	Kathrein
Kategorie:	Digital-Decoder
Modell:	UFS 651si
Gewicht:	1000 g
Produktfarbe:	Silber
Betriebstemperatur:	5 - 40 °C
Fernbedienung enthalten:	Ja
Stromverbrauch (Standardbetrieb):	5 W
Stromverbrauch (Standby):	0.5 W
Anzahl Kanäle:	4000 Kanäle
Energiebedarf:	230V /50-60Hz
Videotext:	800 Seiten
Verbesserung des Videotexts:	Ja
Elektronischer Programmführer (EPG):	Ja
Anzahl SCART-Anschlüsse:	2
Audio (L,R) Out:	1
Unterstützte Video-Modi:	1080i,576p,720p
Anzahl RF Anschlüsse:	2
Frequenzbereich:	950 - 2150 MHz
Abmessungen (BxTxH):	255 x 190 x 47 mm
Seitenverhältnis:	4:3,16:9
HDMI:	Ja
S/PDIF-Ausgang:	Ja
Digitale Satteliten-Ausrüstungs Kontrolle (DiSEqC):	1.0
Composite Video-Ausgang:	1
RS232:	Ja
Liste der Lieblingsfernsehprogramme:	8
Liste der Lieblingsradioprogramme:	8
RF-Anschluss:	F