JVC WR-MG100 Bedienungsanleitung
JVC
Unterwassergehäuse
WR-MG100
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für JVC WR-MG100 (103 Seiten) in der Kategorie Unterwassergehäuse. Dieser Bedienungsanleitung war für 27 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/103
ENGLISH
DEUTSCH
FRANÇAIS
NEDERLANDS
CASTE.ESP.
ITALIANO
РУССКИЙ
POLSKI
WR-MG100
Marine Case
INSTRUCTIONS
Unterwassergehäuse
BEDIENUNGSANLEITUNG
Boîtier sous-marin
MANUEL D’UTILISATION
Onderwaterhuis
GEBRUIKSAANWIJZING
Carcasa submarina
MANUAL DE INSTRUCCIONES
Custodia subacquea
ISTRUZIONI
Бокс для подводной съемки
ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ
Obudowa podwodna
INSTRUKCJA OBSŁUGI
潛水盒
潛水盒
潛水盒
潛水盒潛水盒
使用說明書
使用說明書
使用說明書
使用說明書使用說明書
2
In order to use this product safely
Preparation (A Pg. 6)
• Check that there is no dirt, cracks, or damage to
the O-ring.
• Always apply grease to the O-ring.
Attaching the Marine Case to the Camera
(A Pg. 7, 8)
• Make sure that the O-ring is not twisted, and that
you do not forget to attach it.
• When tightening the seal, make sure there are
no foreign objects caught in the seal.
Recording the Video/Still Image Files
(A Pg. 8, 9)
• Avoid opening and closing the marine case in
the shooting location.
• When holding the marine case, lower it gently
into the water.
Detaching the Marine Case/Maintenance
(A Pg. 9, 10, 11)
• Always wash the marine case in fresh water
after use.
• Perform maintenance on the O-ring.
If water leaks into the case due to careless use of
the marine case, JVC cannot accept responsibility
for any damage that may occur to the internal
equipment and materials (video camera, SD card,
etc.), or any expenses incurred in taking the
photographs/video. Therefore, please be careful
when using the marine case.
Before use, this unit must be pre-
tested to check if there is any water
leakage.
This marine case is a precision instrument
designed to permit safe video recording under
high water pressure. Please pay careful attention
when handling the unit before and after use, as
explained in this user’s manual.
Each part of the marine case has been subject to
strict controls during the manufacturing process,
and the individual functions have faced stringent
tests during the assembly process. Each marine
case has also had to pass waterproof inspections
using high-pressure water testers. However,
damage can sometimes occur during transport
and distribution, or during storage after purchase,
so before diving always carry out the following
pre-use test to verify safety.
Pre-use test
Be sure to perform the following pre-use test
before diving.
1. Before mounting the camera inside the
marine case, dive with only the empty
marine case and test for water leaks.
Allow 5 or 6 minutes to ensure there are no
leaks.
Be sure to perform this test to ensure the
safety of your camera.
2. The following are some common causes of
water leaks:
Safety Precaution
Please read before use
A. The marine case is used without attaching
the O-ring.
B. The O-ring is not mounted in the correct
position.
C. The O-ring is damaged or deformed.
D. There is sand, dirt, hair or other foreign
matter on the O-ring.
E. There is sand, dirt, hair or other foreign
matter on the contact surface of the O-ring
or on the inside of the lid.
F. The provided strap or drying agent bag is
pinched inside the marine case when the lid
is closed.
3
3. Check that there are no scratches or cracks
on the marine case every time you use it.
The marine case must withstand water
pressure with use. Repeated exposure to
pressure eventually leads to material fatigue,
which may result in damage of the marine
case. Every time you use the marine case,
check in advance that there are no scratches
or cracks. If you frequently use the marine
case, be sure to ask for maintenance at the
store of purchase. (There is a charge for
maintenance.)
To protect your camera and ensure optimum use,
keep the examples listed above in mind when
using the marine case.
JVC accepts no responsibility for water leakage or
damage to anything inside the marine case
(camera, SD card, etc.) due to careless usage of
this product. Be sure to follow correct procedures
when using the marine case.
• Anti-fog liquid
• Cleaner liquid (to remove dirt)
• Silicone grease (5 g) x 1
• Silicone cloth
• Drying agent (2 g) x 5
• Lens tissue paper (50 sheets) x 1
• Swab
• Strap
You can purchase the following set of expendable
parts.
Please contact your local JVC service
representative.
• O-rings x 2
• Silicone grease (5 g) x 1
• Drying agent (2 g) x 5
• Lens tissue paper (50 sheets) x 1
Accessories
• 2 O-rings
One spare O-ring.
• Base
To attach to the camera.
• Grip
Commercially available
lights and weights can also
be attached.
• Pick
• Screw tightening key
• 2 hexagonal wrenches
Large: for screwing the grip
Small: buckle opener
Maintenance Kit - Sold Separately
(Part Number: MG100_MTKIT)
O-ring
Produktspezifikationen
| Marke: | JVC |
| Kategorie: | Unterwassergehäuse |
| Modell: | WR-MG100 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit JVC WR-MG100 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Unterwassergehäuse JVC
3 Juli 2024
Bedienungsanleitung Unterwassergehäuse
Neueste Bedienungsanleitung für -Kategorien-
3 Juli 2024
29 Juni 2024
29 Juni 2024
29 Juni 2024