JVC DT-V1710CGU= Bedienungsanleitung

JVC Fernseher DT-V1710CGU=

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für JVC DT-V1710CGU= (24 Seiten) in der Kategorie Fernseher. Dieser Bedienungsanleitung war für 15 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/24
INSTRUCTIONS
DT-V1700CG
MULTI-FORMAT MONITOR
VOLUME
SLOT 1
A B
DEGAUSS
MENU BLUE
CHECK
ASPECT AREA
MARKER
UNDER
SCAN PULSE
CROSS COLOR
OFF
SLOT 2
C D
SLOT 3 POWER
E F
INPUT SELECT
For Customer Use:
Enter below the Serial No. which is located on the rear of
the cabinet. Retain this information for future reference.
Model No. :DT-V1700CG
Serial No. :The illustration above shows the DT-V1700CG with provided
wide mask attached.
SCREEN BURN
● It is not recommended to keep a certain still image
displayed on screen for a long time as well as displaying
extremely bright images on screen. This may cause a
burning (sticking) phenomenon on the screen of cathode-ray
tube. This problem does not occur as far as displaying
normal video playback motion images.
䡵 PRECAUTIONS
● Use only the power source specified on the unit.
(120 V/230 V AC, 50 Hz/60 Hz)
● Keep flammable material, water, and metal objects away
from the unit – especially the interior of the unit.
● This unit incorporates high voltage circuitry.
For your own safety and that of your equipment, do not
attempt to modify or disassemble this monitor.
There are no user-serviceable parts inside.
● Video or audio signals cannot be input to this monitor
without optional input cards.
● In these instructions, all explanations (except where noted)
refer to the DT-V1700CG with input cards installed.
䡵 HANDLING
● Avoid shocks or vibrations. These may damage the unit and
cause it to malfunction.
● Do not block the ventilation slots.
● Do not expose this unit to high temperatures.
Extended exposure to direct sunlight or a heater could
deform the cabinet or cause the performance of internal
components to deteriorate.
● Do not place the unit near appliances generating strong
electric or magnetic fields. There can generate picture noise
and instability.
● Keep the monitor clean by wiping the cabinet and CRT
screen with a piece of soft cloth. Do not apply thinner or
benzine. These chemicals can damage the finish and erase
printed letters. When the unit is excessively dirty, use a
diluted neutral cleanser, then wipe away the cleanser with a
dry cloth.
DEGAUSS
● Do not use a magnet eraser to degauss the monitor’s
cathode ray tube from the outside. Doing so may distort its
aperture grill and cause a malfunction.
In order to prevent any fatal accidents caused by
misoperation or mishandling the monitor, be fully aware of all
the following precautions.
WARNINGS
To prevent fire or shock hazard, do not expose this
monitor to rain or moisture. Dangerous high voltages
are present inside the unit. Do not remove the back
cover of the cabinet. When servicing the monitor,
contrast qualified service personnel. Never try to
service it yourself.
WARNING : THIS APPARATUS
MUST BE EARTHED.
2
Improper operations, in particular alternation of high
voltage or changing the type of tube may result in x-ray
emission of considerable dose. A unit altered in such a
way no longer meets the standards of certification, and
must therefore no longer be operated.
This monitor is equipped with a 3-blade grounding-type
plug to satisfy FCC rule. If you are unable to insert the
plug into the outlet, contact your electrician.
FCC NOTICE (U.S.A. only)
CAUTION: Changes or modifications not approved by
JVC could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to
comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful
interference when the equipment is operated in a
commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction
manual, may cause harmful interference to radio
communications. Operation of this equipment in a
residential area is likely to cause harmful interference in
which case the user will be required to correct the
interference at his own expense.
SAFETY PRECAUTIONS
ENGLISH
3
Fuse
POWER CONNECTION
The power supply voltage rating of this product is AC 120 V (For U.S.A. and Canada only) and AC 230 V (For European countries
or United Kingdom), the power cord attached conforms to the following power supply voltage and countries. Use only the power
cord designated to ensure Safety and EMC regulations of each countries.
Power cord
Power supply voltage : AC 120 V AC 230 V AC 230 V
Countries : U.S.A. and Canada European countries United Kingdom
Warning:
● Do not use the same Power Cord for AC 120 V as for AC 230 V. Doing so may cause malfunction, electric shock
or fire.
Note for the United Kingdom power cord only
The plug on the United Kingdom power cord has a built-in fuse. When replacing the fuse, be sure to use only a correctly rated
approved type, re-fit the fuse cover.
(Consult your dealer or qualified service personnel.)
How to replace the fuse
Open the fuse compartment with the blade screw driver, and
replace the fuse.
(* An example is shown in the illustration.)
SAFETY PRECAUTIONS ........................................................................2
CONTROLS AND FEATURES ................................................................ 4
CONTROLS AND FEATURES
(INPUT CARD: OPTIONAL) ....................................................................6
PREPARATION .......................................................................................8
BASIC MENU OPERATIONS
(MAIN MENU, SETUP MENU) ................................................................9
HOW TO USE “MAIN MENU”...............................................................10
HOW TO USE “SETUP MENU” ............................................................13
HOW TO USE EXTERNAL CONTROL .................................................17
TROUBLESHOOTING...........................................................................19
SPECIFICATIONS .................................................................................21
CONTENTS

Produktspezifikationen

Marke: JVC
Kategorie: Fernseher
Modell: DT-V1710CGU=

Brauchst du Hilfe?

Wenn Sie Hilfe mit JVC DT-V1710CGU= benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Fernseher JVC

JVC

JVC AV-2108TE Bedienungsanleitung

16 Oktober 2024
JVC

JVC HD-Z56RF7 Bedienungsanleitung

9 Juli 2024
JVC

JVC AV-21VS24 Bedienungsanleitung

8 Juli 2024
JVC

JVC AV-2106YE Bedienungsanleitung

7 Juli 2024
JVC

JVC AV-21WS24 Bedienungsanleitung

18 Mai 2024
JVC

JVC AV-25VX74 Bedienungsanleitung

9 Mai 2024
JVC

JVC LT-22DD1 Bedienungsanleitung

27 April 2024
JVC

JVC DT-V1710CGU= Bedienungsanleitung

26 April 2024
JVC

JVC AV-2108WE Bedienungsanleitung

16 April 2024
JVC

JVC AV-29WX24 Bedienungsanleitung

7 April 2024

Bedienungsanleitung Fernseher

Neueste Bedienungsanleitung für -Kategorien-

Sylvania

Sylvania 6720FDD Bedienungsanleitung

16 Oktober 2024
Sylvania

Sylvania 3913LCV Bedienungsanleitung

16 Oktober 2024
Sylvania

Sylvania 4913CLT Bedienungsanleitung

16 Oktober 2024
Sylvania

Sylvania 6420FB Bedienungsanleitung

15 Oktober 2024
Samsung

Samsung CS-29M21BP Bedienungsanleitung

14 Oktober 2024
Sylvania

Sylvania 6419TA Bedienungsanleitung

13 Oktober 2024
Samsung

Samsung CS-29A11PQ Bedienungsanleitung

12 Oktober 2024
Sony

Sony KP-53S4 Bedienungsanleitung

11 Oktober 2024
Daewoo

Daewoo DTQ-13P2FC Bedienungsanleitung

11 Oktober 2024
Samsung

Samsung CS-20H2Z Bedienungsanleitung

10 Oktober 2024