Juwel EasyFeed Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Juwel EasyFeed (5 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 6 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/5
<–––>
A B
D
E
C
Instruction Manual
Automatic Feeder
www.juwel-aquarium.com
Introduction
Thank you for choosing a JUWEL Aquarium product.
Our products represent over 40 years experience in the manufacturing of aquariums
and their accessories applying the most modern production techniques in bringing
together the JUWEL Aquarium system, which is both easy to use and simple to
maintain.
Installing the JUWEL Automatic Feeder
The JUWEL automatic feeder is suitable for all aquariums. All that typically requires is
simply cutting an opening into the cover lid of the aquarium that is suitable for
retaining the holding jacket of the automatic feeder.
The holding jacket is designed in such a manner that it includes a small cover which
closes the feed opening while the automatic feeder is not being used. Accordingly, no
light enters through the cover.
The opening is pre-cut and closed with a cover in some JUWEL aquariums during
manufacturing.
1. Start by removing the cover that closes the opening for your JUWEL automatic
feeder in the lid (if applicable) or cut an opening into the lid.
2. Place the holding jacket included in the delivery into the opening.
3. Open the cover of the feed opening.
4. Properly position the automatic feeder above the opening in the holding jacket.
1.
2.+ 3.
4.
Note. Flap sets for Juwel automatic feeder
If the flap set on your Juwel aquarium does not have the feeder template marked
on it we recommend that you contact your supplying retailer.
An original Juwel flap set with the appropriate feeder template can be purchased
as a spare part.
2
Programming the JUWEL Automatic Feeder
The JUWEL automatic feeder enables you to program up to two feeds per day.
When setting up the feeder please consider the timing carefully, the first feed will
happen when you turn the feeder on and then subsequently every 24 hours at that set
time. If you select a second feed this will happen automatically 6 hours after the first
and again will repeat this cycle every 24 hours. Please consider this timing to avoid
feeding the fish when the lights are out.
Start by placing the AA batteries that are included with your Juwel Automatic feeder
into battery compartment E.
Push the "ON/OFF" button. A red LED will illuminate to confirm this operation.
The first feed is activated by turning on the feeder and is confirmed by a Green LED
which will initially flash and then stay on. At this point an actual feeding will take
place and the time is set for subsequent feeds at 24 hour intervals until turned off.
If you require a second feeding, push the "SET" button.
A yellow LED starts flashing and subsequently illuminates. This indicates that you have
set the JUWEL automatic feeder to two feedings. A first feeding will now take place at
the set time and a second feeding will take place 6 hours after the first feeding on all
following days.
(Example: Activation at 9 a.m., feedings at 9 a.m. and 3 p.m.)
If you wish to switch back to one feeding, press the "SET" button one more time or
switch off the automatic feeder prior to switching it back on.
Control panel:
ON/OFF: Switches the automatic feeder ON/OFF
SET: Selecting the feeding time and programme start
Green LED: 1 release of feed within 24 hours
The release of feed takes place at the time of the initial programme activation and
then exactly 24 hours on all following days.
Yellow LED: 2 releases of feed within 24 hours
The first release of feed takes place at the time of the initial programme activation,
the second feeding follows after 6 hours. This cycle is repeated every 24 hours.
Please set the programme in such a manner that the JUWEL automatic feeder releases
the feed while your lights are on.
M: Manual feed release
Push the "M" button in order to release additional feed or to test the functionality.
Batteries
If the batteries have been replaced or removed, the
JUWEL automatic feeder will need to be re-programmed.
If no LEDs are illuminated, please check the batteries for proper installation or replace
them.
3


Produktspezifikationen

Marke: Juwel
Kategorie: Nicht kategorisiert
Modell: EasyFeed

Brauchst du Hilfe?

Wenn Sie Hilfe mit Juwel EasyFeed benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Juwel

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-