JUNG TRAL236 Bedienungsanleitung

JUNG Thermostat TRAL236

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für JUNG TRAL236 (5 Seiten) in der Kategorie Thermostat. Dieser Bedienungsanleitung war für 17 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/5

Room temperature controller

26.06.20201 / 50024091005

Room temperature controller

Ref.-no.: TR .. 231 ..

TR .. 241 ..

TR .. 236 ..

TR .. 246 ..

Operating instructions

1 Safety instructions

Electrical devices may only be mounted and connected by electrically skilled persons.

Serious injuries, re or property damage possible. Please read and follow manual fully.

Danger of electric shock. Always disconnect before carrying out work on the devise or load.

A relative air humidity of max. 95% may not be exceeded. Avoid any moisture condensation.

These instructions are an integral part of the product, and must remain with the end customer.

2 Structure of the device

Fig. 1: Geräteaufbau

(1) Insert

(2) Frame

(3) Cover

(4) Rocker

(5) Screw

(6) Setting knob

3 Function

Intended purpose

The room temperature controller is used to regulate the temperature in closed rooms such as ats, schools, function

suites, workshops, etc.

Product characteristics

Neutral conductor required

TR 231 U / TR 241 U:

- Separate terminal for temperature reduction of 5 K (e.g. during night time)

- ON/OFF switch with status LED

- When set temperature is reached the contact opens up.

TR 236 U / TR 246 U:

- No OFF-position

- Without switch and control LED

- When set temperature is reached the NO/NC contact switches over.

Room temperature controller

26.06.20202 / 50024091005

4 Information for electrically skilled persons

Installation and electrical connection

DANGER

Electric shock from touching live parts in the installation environment.

An electric shock can be fatal.

Before working on the device, disconnect the power and cover live parts in the area.

- Mount the room temperature controller on an internal wall opposite the heat source if possible.

- Do not mount the room temperature controller on outside walls.

- Avoid draughts from windows and doors.

- Ensure that the normal air circulation in the room reaches the controller without any obstacles.

- External heat sources inuence the accuracy of the controller. Avoid direct sunlight and do not place heat-emitting

devices in the vicinity of the room temperature controller (heaters, lamps, etc.).

- Dimmers also generate heat.

If a controller is installed in a common switch frame with a dimmer, the distance between them should be as great

as possible. When arranging them vertically, the controller must be installed underneath the dimmer.

Connection

Fig. 2: TR 231 U

Fig. 3: TR 241 U

Room temperature controller

26.06.20203 / 50024091005

Fig. 4: TR 236 U

Fig. 5: TR 246 U

• Carry out the electrical connection according to the respective wiring diagram.

iEnsure that the neutral conductor N is connected to terminal N. Considerable uctuations in temperature may

otherwise occur.

Conductor cross-section: 1 to 2.5 mm² solid conductor

Symbols used in the wiring diagram

L = L conductor

N = N-conductor

AC1 = 24 V power supply

AC2

= Connection for clock signal to reduce temperature

= Heating

= Cooling

RF = Resistor for thermal feedback

TA = Resistor for night reduction of room temperature

Installation

• Mount room temperature controller in a switch box in accordance with DIN 49073.

Mounting height: approx. 1.5 m above the oor

• Clip the rocker (4) on the switch in the ush insert. (g. 1)

• Place the center plate together with the frame on the ush insert. The center plate must snap in place in the top

left of the housing base.

• Tighten the screw (5). (g. 1)

• Clip on the setting knob (6). (g. 1)

Produktspezifikationen

Marke:	JUNG
Kategorie:	Thermostat
Modell:	TRAL236
Produktfarbe:	Aluminium
Steuerung:	Drehregler
Energiequelle:	AC
Fernbedienung enthalten:	Nein
Display-Hintergrundbeleuchtung:	Nein
Startzeitvorwahl:	Nein
Nachtmodus:	Nein
Funktioniert mit Google Assistant:	Nein
Funktioniert mit Amazon Alexa:	Nein
Smartphone Fernsteuerung:	Nein
Hintergrundbeleuchtung:	Nein
Intelligentes Thermostat:	Nein
Speicherfunktion:	Nein
Temperatur-Sollwertbereich:	5 - 30 °C
Manuelle Temperatureinstellung:	Ja
Maximaler Schaltstrom:	10 A
Arbeitsspannung:	230 V
Kühlung:	Ja
Funktioniert mit Apple HomeKit:	Nein