JUNG A17180WWM Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für JUNG A17180WWM (16 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/16
LB management
LB management
LB management
LB managementLB management
Universal automatic switch 1.1 m, Universal automatic switch 2.2 m
Universal automatic switch 1.1 m
Universal automatic switch 1.1 m
Universal automatic switch 1.1 m
Universal automatic switch 1.1 mUniversal automatic switch 1.1 m
Art. no.: ..17181..
Universal automatic switch 2.2 m
Universal automatic switch 2.2 m
Universal automatic switch 2.2 m
Universal automatic switch 2.2 mUniversal automatic switch 2.2 m
Art. no.: ..17281..
Operating instructions
Operating instructions
Operating instructions
Operating instructionsOperating instructions
1
1
1
11 Safety instructions
Safety instructions
Safety instructions
Safety instructionsSafety instructions
Electrical devices may only be mounted and connected by electrically skilled persons.
Electrical devices may only be mounted and connected by electrically skilled persons.
Electrical devices may only be mounted and connected by electrically skilled persons.
Electrical devices may only be mounted and connected by electrically skilled persons.Electrical devices may only be mounted and connected by electrically skilled persons.
Serious injuries, fire or property damage possible. Please read and follow manual fully.
Serious injuries, fire or property damage possible. Please read and follow manual fully.
Serious injuries, fire or property damage possible. Please read and follow manual fully.
Serious injuries, fire or property damage possible. Please read and follow manual fully.Serious injuries, fire or property damage possible. Please read and follow manual fully.
Danger of electric shock. Always disconnect before carrying out work on the device or load. In
Danger of electric shock. Always disconnect before carrying out work on the device or load. In
Danger of electric shock. Always disconnect before carrying out work on the device or load. In
Danger of electric shock. Always disconnect before carrying out work on the device or load. InDanger of electric shock. Always disconnect before carrying out work on the device or load. In
so doing, take all the circuit breakers into account, which support dangerous voltages to the
so doing, take all the circuit breakers into account, which support dangerous voltages to the
so doing, take all the circuit breakers into account, which support dangerous voltages to the
so doing, take all the circuit breakers into account, which support dangerous voltages to theso doing, take all the circuit breakers into account, which support dangerous voltages to the
device and or load.
device and or load.
device and or load.
device and or load.device and or load.
Danger of electric shock. Device is not suitable for disconnection from supply voltage. The load
Danger of electric shock. Device is not suitable for disconnection from supply voltage. The load
Danger of electric shock. Device is not suitable for disconnection from supply voltage. The load
Danger of electric shock. Device is not suitable for disconnection from supply voltage. The loadDanger of electric shock. Device is not suitable for disconnection from supply voltage. The load
is not electrically isolated from the mains even when the device is switched off.
is not electrically isolated from the mains even when the device is switched off.
is not electrically isolated from the mains even when the device is switched off.
is not electrically isolated from the mains even when the device is switched off.is not electrically isolated from the mains even when the device is switched off.
Do not press on the sensor window. Device can be damaged.
Do not press on the sensor window. Device can be damaged.
Do not press on the sensor window. Device can be damaged.
Do not press on the sensor window. Device can be damaged.Do not press on the sensor window. Device can be damaged.
The device is not suitable for use as a burglar alarm or other alarm.
The device is not suitable for use as a burglar alarm or other alarm.
The device is not suitable for use as a burglar alarm or other alarm.
The device is not suitable for use as a burglar alarm or other alarm.The device is not suitable for use as a burglar alarm or other alarm.
These instructions are an integral part of the product, and must remain with the end customer.
These instructions are an integral part of the product, and must remain with the end customer.
These instructions are an integral part of the product, and must remain with the end customer.
These instructions are an integral part of the product, and must remain with the end customer.These instructions are an integral part of the product, and must remain with the end customer.
2
2
2
22 Device components
Device components
Device components
Device componentsDevice components
Figure1: Motion detector cover 1.10m
1 / 16
32599743 12.10.2020
J0082599743
LB management
LB management
LB management
LB managementLB management
Universal automatic switch 1.1 m, Universal automatic switch 2.2 m
Figure2: Motion detector cover 2.20m
(1) FMinsert
(2) Frame
(3) Motion detector cover
(4) Sensor window and status LED
(5) Switch 0 AUTO I
0 AUTO I
0 AUTO I
0 AUTO I0 AUTO I
(6) Button OFF
OFF
OFF
OFFOFF
(7) Button ON
ON
ON
ONON
Status LED
Status LED
Status LED
Status LEDStatus LED
Red LED lights up Self-test
Red LED flashes 3 s on / 3 s off Alarm function active
Red LED flashes 0.5 s on / 0.5 s off Alarm was triggered
Red LED flashes three times followed by a 1 s
pause
Cover was previously connected to another in-
sert
Yellow LED lights up "Continuous off" or "Off for 0.5 - 5 hours" func-
tion active
Yellow LED flashes Presence simulation active
Green LED lights up "Continuous on" or "On for 0.5 - 5 hours" func-
tion active
Blue LED lights up Device is coupled with a mobile end device
and active app
Blue LED flashes 0.5 s on / 0.5 s off Bluetooth coupling mode active
3
3
3
33 Intended use
Intended use
Intended use
Intended useIntended use
– Automatic switching of lighting depending on the heat motion and ambient brightness
– Operation with flush-mounted insert for dimming or switching or 3-wire extension from LB
management
– Wall installation on flush-mounted insert
2 / 16
32599743 12.10.2020
J0082599743
LB management
LB management
LB management
LB managementLB management
Universal automatic switch 1.1 m, Universal automatic switch 2.2 m
Product characteristics
Product characteristics
Product characteristics
Product characteristicsProduct characteristics
Functions directly on the cover
– Extension of the detection area in combination with 3-wire extension
– Continuous on, Continuous off
– Operation with 2-wire or 3-wire extension, rotary dimmer extension or push-button
– Dimming insert can be dimmed via extension
– Resetting to factory setting
Motion detector cover 1.10m
– Cover panel for limiting the detection field
Functions via app
– Setting the brightness threshold
– Adjusting the sensitivity of the PIR sensors
– Setting the run-on time
– Continuous on, Continuous off
– On or off for 0.5 - 5 hours
– Switch-off warning
– Dynamic run-on time
– Presence simulation
– Alarm function
– Timer function
– Operating lock
– Reduced basic sensitivity
– Automatic summer/winter time changeover
– Test operation
In combination with a switch insert
– Short time operation
In combination with a dimming insert
– Switch on with last saved brightness or saved switch-on brightness
– Adjusting the minimum brightness
– Adjusting the maximum brightness
– Hotel function
– Night light function
Automatic operation
Automatic operation
Automatic operation
Automatic operationAutomatic operation
The device detects heat motions of people, animals and objects.
– The light is switched on if a person enters the detection field and the brightness threshold
is below the set brightness threshold.
– The run-on time restarts with each detected motion.
– The light is switched off, if:
no more movement is detected in the detection field and the run-on time has elapsed or
the ambient light is too bright and the run-on time has elapsed.
To avoid any switch-on caused by a cooling illuminant, no movement signals are evaluated for a
brief lockout time after switching off. The motion detector adjusts itself to the ambient conditions
to keep the time as short as possible.
Behaviour after a mains voltage failure
Behaviour after a mains voltage failure
Behaviour after a mains voltage failure
Behaviour after a mains voltage failureBehaviour after a mains voltage failure
After mains voltage return, the device performs a self-test for a maximum of 20 seconds. After
the self-test has been completed, the device is ready for operation.
3 / 16
32599743 12.10.2020
J0082599743


Produktspezifikationen

Marke: JUNG
Kategorie: Nicht kategorisiert
Modell: A17180WWM

Brauchst du Hilfe?

Wenn Sie Hilfe mit JUNG A17180WWM benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert JUNG

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-