JUNG 4073 RF TSM Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für JUNG 4073 RF TSM (6 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 2 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/6
KNX RF radio transmitter module
KNX RF radio transmitter module 1-gang
Art. No. : 4071 RF TSM
KNX RF radio transmitter module 2-gang
Art. No. : 4072 RF TSM
KNX RF radio transmitter module 3-gang
Art. No. : 4073 RF TSM
KNX RF radio transmitter module 4-gang
Art. No. : 4074 RF TSM
Operating instructions
1 Safety instructions
Electrical equipment may only be installed and fitted by electrically skilled persons.
Serious injuries, fire or property damage possible. Please read and follow manual fully.
Keep button cells out of reach of children! If button cells are swallowed, get medical help
immediately.
Risk of explosion! Do not throw batteries into fire.
Risk of explosion! Do not recharge batteries.
The radio communication takes place via a non-exclusively available transmission path,
and is therefore not suitable for safety-related applications, such as emergency stop and
emergency call.
These instructions are an integral part of the product, and must remain with the end
customer.
2 Device components
Figure 1: 4-gang radio pushbutton module
(1) Base plate
(2) Fastening screws for the base plate
(3) Design frame
(4) Pushbutton module with adapter frame (see adapter frame assembly instructions)
(5) Fastening screws
(6) Buttons
1/6
32591013
j0082591013 18.01.2016
Figure 2: Pushbutton assignment 1-gang, 2-gang, 3-gang and 4-gang
(7) Acknowledgement/transmission LED, blue
(8) Status LED per button pair, red
3 Function
System information
This device is a product of the KNX system and complies with the KNX directives. Detailed
technical knowledge obtained in KNX training courses is a prerequisite to proper understanding.
The range of a radio system depends on various external circumstances. The range can be
optimised by the choice of installation location. The product documentation for this device
contains application basics for the KNX radio system.
This device meets the requirements of the R&TTE directive 1999/5/EC and may be operated in
all EU and EFTA countries.
The function of this device depends upon the software. Detailed information on loadable
software and attainable functionality as well as the software itself can be obtained from the
manufacturer´s product database. Planning, installation and commissioning of the device are
carried out with the aid of KNX-certified software of version ETS5 or higher. You can find the
up-to-date product database, technical descriptions and declaration of conformity on our
website.
Intended use
- Radio operation of loads, e.g. light on/off, dimming, Venetian blinds up/down, brightness
values, calling up and saving light scenes.
- Operation in cabled KNX systems via media coupler (see chapter Accessories)
Product characteristics
- Pushbutton functions switching, dimming, Venetian blind control, value transmitter, scene
recall
- One, two, three or four button pairs for pushbutton function or rocker function
- Status indicator via status LED
- Battery-powered device
Energy saving mode
The device switches to the energy saving mode after a preset time. In energy saving mode, the
LEDs remains switched off. During operation, the energy saving mode is exited.
iOperations from the energy saving mode are executed immediately.
2/6
32591013
j0082591013 18.01.2016
KNX RF radio transmitter module
4 Operation
Operating a function or load
oSwitch: Short press on button.
oDim: Long press on the button.
oMove Venetian blind: Long press on button.
oStop or adjust Venetian blind: Short press on button.
oCall up light scene: Short press on button.
oSave light scene: Press button for longer than 5 seconds.
oSet value: Press button briefly.
LED function
Acknowledgement/transmission LED (7) lights up after pressing a button and goes out as soon
as the feedback has been received from the actuator. After the acknowledgement/transmission
LED goes out, the status LED (8) displays the actuator feedback. The display duration can be
changed by the programming or can be dispensed with entirely.
The acknowledgement/transmission LED flashes rapidly if a transmission error occurs.
5 Information for electrically skilled persons
5.1 Fitting and electrical connection
Fitting the device
To ensure good transmission quality, keep a sufficient distance from any possible sources of
interference, e.g. metallic surfaces, microwave ovens, hi-fi and TV systems, ballasts or
transformers.
iPerform commissioning procedures before installation (see chapter Commissioning).
oChange the battery (see chapter Changing the battery).
oScrew or glue the base plate (1) to an even surface. The label has to be at theTOP/OBEN
top.
oAttach design-frame (3) to the base plate.
oScrew wall transmitter module (4) to base plate.
iScrewing the screws too tightly could impair functions of the wall transmitter.
oSnap covers (6) on (figure 1).
Information on gluing mounting
To be able to fasten the pushbutton safely, the substrate must be flat and free of dust and
grease.
oRemove the rear, unpunched film of the enclosed adhesive pad.
oAlign the adhesive pad, stick it to the surface and smooth it out. Remove air bubbles.
oRemove the two inner segments of the front film.
oAlign the base plate to the external punching and stick it on.
iIn the case of multiple combinations, the abutting sides of the adhesive pads must be cut
along the external punching using a ruler and a cutter (figure 3).
3/6
32591013
j0082591013 18.01.2016
KNX RF radio transmitter module


Produktspezifikationen

Marke: JUNG
Kategorie: Nicht kategorisiert
Modell: 4073 RF TSM

Brauchst du Hilfe?

Wenn Sie Hilfe mit JUNG 4073 RF TSM benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert JUNG

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-