Joovy 013 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Joovy 013 (12 Seiten) in der Kategorie Babyprodukte. Dieser Bedienungsanleitung war für 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/12
USA: Joovy • 2919 Canton Street • Dallas, TX 75226 • Tel: (877) 456-5049 • Fax: (214) 761-1774 • Email: customerservice@joovy.com • Website: www.joovy.com
CANADA: Elfe Juvenile Products • 4500 Thimens Blvd • Saint-Laurent, QC, H4R 2P2 • Tel: (800) 667-8184 • Email: service@elfe.ca
Toy Booster Seat™
012/013
© Joovy 2017 • 170926
EN FR ES
!WARNING
Please read these instructions carefully before use and keep them for future reference.
• This product is a TOY booster seat for dolls or stuffed toys ONLY.
• NEVER use this toy to carry a baby or child for any purpose whatsoever.
• NEVER use this toy to hold a baby or child in a vehicle. Death or serious injury may occur.
• NEVER leave the booster unsecured in a vehicle. An unsecured booster can be thrown around and may injure you
or your child in a sharp turn, sudden stop or accident.
• Discard this product if it is ever involved in an actual vehicle accident.
• The maximum weight that can be carried in the booster is 7 lbs. (3.2 kg).
• Discard all packaging materials properly. Do not allow children to play with them.
Although this is a TOY and must NEVER be used for a baby or child, other warnings are provided throughout this
manual to promote your child’s safe use of this product for their doll or stuffed toy. For your child’s understanding of
the safe use of this product, please read and adhere to these warnings and insure that your child also understands
and follows them.
Please do not return this product to the store
If you experience any difculty with the assembly or use of this product, or if you have a question regarding these
instructions, please contact our Customer Service Department:
UNITED STATES – Joovy: (877) 456-5049, Hours 8:30 am – 5:00 pm Central Time.
CANADA – Elfe Juvenile Products: (800) 667-8184, Hours 8:30 am – 5:00 pm Eastern Time.
Please note: Styles and colors may vary.
Assembling and Using your Doll/Stuffed Toy Booster Seat
To insure safe operation of your booster, please follow these instructions carefully.
1 Unpacking the Product
• Carefully remove booster from the box and plastic bag.
• Discard all packaging materials properly. Do not allow children to play with them.
2 Positioning the Shoulder Straps
• Place doll or stuffed toy into booster.
• Determinewhichpairofshoulderharnessslotsisevenwithorjustabovethedoll’sshoulders.Theywillnotholdthedollsecurelyina
sudden stop or crash.
• If the shoulder straps need to be adjusted, remove doll from booster.
• From the back of the booster, unthread harness straps from the sliding buckle. REMEMBER the correct routing of the straps.
• Remove the straps from slots in the seat and re-route them through the desired slots, making sure they are not twisted.
• Rethread the straps through the buckle.
• Check that straps are secure by pulling on harness straps from the front.
3 Securing Doll in the Booster
• Unbuckle the harness by pressing the button in the center of the buckle. See Figure 3.1.
• Open the harness clip by pressing the button and unbuckling the clip. See Figure 3.2.
• Placethedollintheboosterwiththeshoulderstrapsoveritsshouldersandchest.Thenplacethecrotchstrapbetweenthedoll’slegs.
• Bringtheseatbeltaroundthedoll’swaistandinsertthemaleendofeachwaiststrapbuckleintothefemalebuckle.Insurethattheysnap
into place. See Figure 3.3.Tightenthewaistbelttobesnugaroundthedoll’swaist.
• Buckle the harness clip pieces together. See Figure 3.4.Positiontheharnessclipinthemiddleofthedoll’schest,levelwiththearmpits
and away from the neck.
• Both the shoulder straps and the waist straps may be adjusted using the sliding buckle on these straps, located on the back of the
booster. See Figure 3.5.
!WARNING
NEVER use this booster to carry a baby or child for any purpose whatsoever.
DO NOT use the booster to carry any dolls or stuffed toys that weigh more than 7 lbs. (3.2 kg). As with a real booster,
this toy booster should never be placed near the edges of counter tops, tables, or other surfaces.
EN FR ES
Using your booster seat in the vehicle
4 Vehicle Seat Requirements
• The booster should be placed in the canter position of the seat directly behind the front seats whenever possible.
• The vehicle seat should always be a forward facing seat and the seat should lock in an upright position.
5 Installing the Booster Seat Using Vehicle Belts
To install the booster in a vehicle, you must carefully follow the instructions provided by your vehicle manufacturer in addition to the
information in this manual. Before proceeding, be sure you have read and understand all of the instructions in this section.
• Place the booster in a forward-facing position in the vehicle seat,
• Thread the vehicle seat belt through large oval opening on the side of the booster behind the backrest, and then out through the other
side. See Figure 5.1.
• Buckle the vehicle seat belt, making sure the buckle tongue goes into the correct buckle. The vehicle belt should not be twisted. See
Figure 5.2.
• Secure the booster tightly into position by pushing down on the middle of it with one knee or free hand while tightening the vehicle belt.
Refertoyourvehicleowner’smanualforinstructiontoproperlytightenthevehiclebelt.
!WARNING
NEVER use this toy to hold a baby or child in a vehicle. Death or Serious Injury may occur may occur.
DO NOT use as a booster seat for any dolls or stuffed toys that weigh more than 7 lbs. (3.2 kg).
NEVER leave the booster unsecured in vehicle. An unsecured booster can be thrown around and may injure you or
your child in a sharp turn, sudden stop, or crash.
6 Acceptable Vehicle Belt Systems
Thefollowingbeltsystemsareacceptableforusewithyourboosterseat.Youshouldrefertoyourvehiclesowner’smanualtodetermine
which type of seat belts your vehicle has.
• Lap Belts-Manually Adjusted: When buckled, the belt is tightened manually by pulling on the excess belt while pushing down hard on the
booster.
• Lap Belts with Automatic Locking Retractor (ALR): The automatic locking retractor will not allow the lap belt to lengthen once it is buckled.
Tighten the belt by feeding the belt back into the retractor while pushing down hard on the booster.
• Combination Lap/Shoulder Belt with Locking Latch Plate: Once it is buckled, this type of belt has a latch plate that will not allow the lap
portion of the belt to loosen. Belt is tightened by pulling hard on the shoulder portion of the vehicle belt while pushing down hard on the
booster.
• Combination Lap/Shoulder Belt with Sliding Latch Plate: This type of belt has a latch plate that slides freely along the belt. To prevent
movement of the lap portion of this type belt, the belt MUST be converted through the use of a Locking Clip, unless your vehicle belt can
beconvertedinanotherwayasdescribedinyourvehicleowner’smanual.
7 To Install the Locking Clip
• Tighten the buckled belt by pushing down hard on the booster and pulling hard on the shoulder belt.
• While pushing down on booster, pinch the two straps together behind the buckle tongue. Unbuckle the belt without allowing it to slip.
• Connect lap and shoulder belts with locking clip as shown. See Figure 7.1.
• Re-buckle belt. Check that the lap belt does not move by pulling and pushing hard on the booster. If belt loosens or lengthens, repeat
procedure.
8 Unacceptable Vehicle Belt Systems
DO NOT use any of the following systems to secure the booster.
• Lap Belts with Emergency Locking Retractor (ELR): This lap belt stays loose and can move until it locks in a sudden stop or crash.
• Combination Lap/Shoulder Belt with Retractor: Each strap has a retractor at one end and is attached to the latch plate at the other end.
• Passive Restraint-Lap or Shoulder Belt Mounted on Door.
• Passive Restraint-Lap Belt with motorized Shoulder Belt
• Lap Belts Installed Forward of Seat Crease.
9 Installing Booster Seat with LATCH
• Extend LATCH Attachment Strap to its maximum length.
• Place the booster in a front-facing position in the vehicle seat.
• Thread LATCH Attachment Strap through one of the slots on the side of the booster and then out the other side slot. See Figure 9.1.
Makesurestraplaysatandisnottwisted.
• Push the connectors through the seat crease slots and hook them to vehicle lower anchors. See Figure 9.2.Pullrmlyonconnectorsto
be sure they are attached.
• Tighten LATCH by pushing down hard on booster and pulling the adjustment belt.
• NEVERputtwoLATCHAttachmentStrapconnectorsononevehicleLATCHanchorunlessspecicallyallowedbythevehiclemanufacturer.
• Check that the LATCH Attachment Strap stays tight and does not slip from the tightened position.


Produktspezifikationen

Marke: Joovy
Kategorie: Babyprodukte
Modell: 013

Brauchst du Hilfe?

Wenn Sie Hilfe mit Joovy 013 benĂśtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Babyprodukte Joovy

Bedienungsanleitung Babyprodukte

Neueste Bedienungsanleitung fĂźr -Kategorien-