JML Arctic Air 17013-G Bedienungsanleitung

JML Luftfilter Arctic Air 17013-G

Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr JML Arctic Air 17013-G (22 Seiten) in der Kategorie Luftfilter. Dieser Bedienungsanleitung war fĂĽr 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/22
INSTRUCTION MANUAL
Arctic_Air_IM.indd 1 24-01-18 15:15
WHATS INCLUDED:
READ ENTIRE MANUAL BEFORE USE
SAVE THESE INSTRUCTIONS
On/o
button
Fan speed
indicator
Front grill
Fan speed
button
Light
button
Water
tank
Back grill
TIPS:
• Place Arctic Air™ on a raised surface such as a table, desk or counter top.
is is the best way to cool your personal area faster.
• Let lter absorb water for at least 3 minutes aer lling tank and before
use. Doing so will get you the coolest air quicker.
• Try to stay within a few feet of Arctic Air™. You’ll feel the most benet
when sitting directly in front.
• Arctic Air™ will run for approximately 8 hours on a single ll on Low fan
speed. Even if water tank is empty, lter is still damp and Arctic Air™ is still
cooling.
1. Place Arctic Air™ on a at surface. (see g 1)
2. Open the water tank door and ll with water (see g 2). We recommend
a pitcher or measuring cup.
3. Plug USB power adapter (SW-050150EU) into an outlet. en, insert larger
USB end of cable into the adapter and the smaller end into the power port
on the back of Arctic Air™. (see g 3) NOTE: You can plug the larger USB
end into a computer to power Arctic Air™ as well. e Power should be
SELV: (DC 5 V, 1.5 or 2.0A).
SETUP:
12 3
Arctic_Air_IM.indd 2-3 24-01-18 15:15
USAGE:
1. Press power button to power on Arctic Air™.
(see g 4)
2. Set the fan speed by pressing button. You can
choose from Low, Medium, and High Mode. e
indicator lights next to the button show you which
speed Arctic Air™ is currently running. (see g 5)
3. Choose your light color by pressing button.
You can choose between solid colors or a
color-cycle mode. (see g 6) COLOR ORDER: blue,
red, white, teal, purple, yellow, green.
4. When you’re done, press the power button again to
turn o your Arctic Air™. NOTE: We recommend
running Arctic Air™ on HIGH mode for at least 5
minutes before powering o to allow for drying.
LOW WATER: When water level is low, water tank will
blink 3 times every 60 seconds in AMBER color. When
tank is lled again light will function as normal again.
We recommend cleaning the water tank and inside of the unit once weekly.
Use only a non-abrasive cloth and mild dish soap when needed.
For best continued results, we recommend changing the lter every 6 months.
Unplug the unit before cleaning.
MAINTENANCE:
e water lter should be changed every 6 months, or
when you feel Arctic Air™ is not functioning as it should
be. e water tank will light up AMBER until lter is
reset. To reset the lter, hold the fan speed button and
the light button for 3 seconds until the water tank is not
AMBER anymore.
1. Unplug Arctic Air™ from the wall.
2. Gently press in release tab on bottom of front grill
and pull grill down and away from unit. Place aside.
(see g 7)
3. Grab onto lter and carefully slide out of unit
completely. (see g 8)
4. Place new lter in Arctic Air™ as shown by mar
kings on lter. (see g 9)
5. Insert top tab of front grill into slot, and press
release tab back into place. (see g 10)
Warning: When you remove the Front Grill the Unit
Fan & Power will turn off & the Water Tank LED will
Blink Red unit the Grill is Put back in place. Its a
safety function.
CHANGING THE FILTER:
4
5
6
7
8
9
10
Arctic_Air_IM.indd 4-5 24-01-18 15:15


Produktspezifikationen

Marke: JML
Kategorie: Luftfilter
Modell: Arctic Air 17013-G

Brauchst du Hilfe?

Wenn Sie Hilfe mit JML Arctic Air 17013-G benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Luftfilter JML

Bedienungsanleitung Luftfilter

Neueste Bedienungsanleitung fĂĽr -Kategorien-