JLab JBuds Air Executive Bedienungsanleitung

JLab Ohrstöpsel JBuds Air Executive

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für JLab JBuds Air Executive (4 Seiten) in der Kategorie Ohrstöpsel. Dieser Bedienungsanleitung war für 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
JBUDS AIR EXEC
EARBUDS
AUTO-CONNECTING EARBUDS
A. Take earbuds out of the charging case and remove stickers.
B. Press and hold both touch sensors 3+ seconds to turn ON.
One earbud turns and the other earbud solid white blinks blue/white
indicating ready to pair to your device.
FIRST TIME SETUP
1CONNECTING TO BLUETOOTH
Select “JLab JBuds Air Executive” in your device
settings. Voice prompt “Bluetooth connected”
followed by will indicate yousolid white lights
are connected.
2
IN THE BOX
Bluetooth
Settings
JLab JBuds Air Executive
EARBUDS
LEFT
TOUCH
SENSOR
RIGHT
TOUCH
SENSOR
INDICATOR LIGHTS CHARGING CASE
USB CHARGE INPUT
CHARGE INDICATOR LIGHTS
EARTIPS
Cloud FoamS M L
ADDING NEW ADDITIONAL BLUETOOTH DEVICES: /
Turn OFF Bluetooth from any previously connected device. Turn ON Bluetooth from new device. Take earbuds out of the case.
Earbuds will automatically enter Bluetooth Pairing. Select “JLab JBuds Air Executive” in device settings to connect.
A. B.
Press and hold 3+ secondsRemove stickers
C
U
S
T
O
M
E
R
S
U
P
P
O
R
T
U
.
S
.
B
A
S
E
D
We love that you are rocking JLab!
We take pride in our products and fully stand behind them.
YOUR WARRANTY
All warranty claims are subject to JLab authorization
and at our sole discretion. Retain your proof of
purchase to ensure warranty coverage.
CONTACT US
Reach out to us at support@jlab.com
or visit jlab.com/contact
L
I
M
I
T
E
D
T
W
O
Y
E
A
R
REGISTER TODAY
jlab.com/register
Product updates How-to tips|
FAQs & more
Placing the earbuds in the charging case
will power OFF earbuds and start charging.
Blue lights indicate earbuds are charging
and will turn off when fully charged.
When earbuds are taken out of the case,
they will auto power ON and reconnect to
your device.
VOLUME DOWN: Single tap
SIRI (iOS) or “OK GOOGLE”
(ANDROID): Double tap
SWITCH MUSIC MOVIE MODE: /
Press & hold 1+ sec
EQ CHANGE: Triple tap
(Cycles through 3 EQ settings)
POWER ON: Press & hold 3+ sec
VOLUME UP: Single tap
PLAY PAUSE: / Double tap
TRACK FORWARD: Press & hold 1+ sec
ANSWER: Single tap
HANGUP: Double tap
REJECT INCOMING CALLS:
Press & hold 1+ sec
BE AWARE ON / OFF: Triple tap
POWER ON: Press & hold 3+ sec
VOICE PROMPTS
“Hello”: Power ON
“Ready to Pair”: JBuds Air Exec are
ready to pair to Bluetooth device
“Bluetooth Connected”:
Earbud is connected to device
“Battery Full”: 100-80%
“Battery Medium”: 80-20%
“Low Battery”: Less than 20%
When power decreases to 10%,
“Low Battery” will play
“Goodbye”: Power OFF
BUTTON FUNCTIONS
Triple tap left earbud for different EQ settings. Voice prompts will indicate EQ settings (JBuds Air Exec will cycle 3 EQ settings)
EQUALIZER MODES
JLab SIGNATURE
JLab C3™ signature
sound with amplified
bass and vocals
BALANCED
Even sound with
no additional
enhancements
BASS BOOST
Amplified bass
and sub-bass
CH N CH NARGI G EARBUDS ARGI G CASE
RIGHT EARBUD
CHARGING
LEFT EARBUD
CHARGING
Lights when pulse white
charging and turn solid white
when fully charged.
Connect the JBuds Air Executive to computer or USB 5V 1A (or less)
output device.
LEFT
TOUCH
SENSOR
RIGHT
TOUCH
SENSOR
1
2
TURN OFF EARBUDS WITHOUT CHARGING CASE:
Enter your Bluetooth device settings and disconnect the JBuds Air Executive. Earbuds will power OFF after 3 minutes.
OR
Try the optional Cush Fins and all
ear tips for best fit and proper seal.
FITTING
• Fully dry off the earbuds before putting in the charging case.
• The left or right earbud can be used independently for music and phone
calls. Simply choose one and take out of the case to connect.
• Choosing the correct ear tip makes a significant improvement in audio
quality due to the proper seal for the driver. Test all ear tips for best
results.
• Only ONE Bluetooth device can be connected at a time. Turn off
Bluetooth on unwanted devices and turn on Bluetooth on chosen
device to connect.
QUICK TIPS WARNING
CUSH FIN
EAR TIP
Place the earbud in
the ear canal and
slightly rotate to
adjust for best fit.
Fully dry off the earbuds before
placing in the charging case.
If the earbuds are damp or wet,
this will cause damage to the
charging case. The warranty will
be voided if the charging case
shows damage by water/sweat.
TROUBLESHOOTING
NO AUDIO IN LEFT EARBUD OR EARBUDS DISCONNECT FROM EACH OTHER
(MANUAL RESET)
BLUETOOTH DEVICE DOES NOT CONNECT/RECONNECT
Enter your Bluetooth device settings and forget the JBuds Air Executive. Fig
1
Turn OFF then ON Bluetooth. Fig
2
1
2
Take the earbuds out of the case. Wait for one to turn and the solid white
other to blink blue/white.
Select “JLab JBuds Air Executive” in device settings to reconnect.
3
4
Enter your Bluetooth device settings and forget the JBuds Air Executive. Fig
Open the charging case door and leave both earbuds inside. Starting with ONE earbud,
quickly tap the touch sensor 7x times blink blue 3x times.. Light will
Leave the earbuds in the charging case. Fig
Repeat with the other earbud. Quickly tap the touch sensor 7x times.
Light will . Figblink blue 3x times
3
Take both earbuds out of the charging case and keep them within 2 inches from each other.
Wait for one earbud to turn and the other to solid white blink blue/white.
You are now ready to pair to your Bluetooth device.
4
A
A
B
Instructional videos at: JLAB.COM/MANUALS
A
Bluetooth
Settings
JLab JBuds Air Executive i
Bluetooth
Settings
B
C1
C1
C2
C2


Produktspezifikationen

Marke: JLab
Kategorie: Ohrstöpsel
Modell: JBuds Air Executive

Brauchst du Hilfe?

Wenn Sie Hilfe mit JLab JBuds Air Executive benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Ohrstöpsel JLab

Bedienungsanleitung Ohrstöpsel

Neueste Bedienungsanleitung fĂĽr -Kategorien-