JL Audio W7AE Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für JL Audio W7AE (16 Seiten) in der Kategorie Subwoofer. Dieser Bedienungsanleitung war für 14 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/16
Owner’s Manual
YELLOW OPTIMUM:
This zone represents the best balance
between long-term reliability, high
output and low distortion performance.
In this zone, you will be taking full
advantage of the woofer's optimum,
low-distortion performance range
without undue risk of failure.
RED MAXIMUM:
In this zone, low-distortion output and
long-term reliability will be compromised
(especially by an aggressive user). Slightly
more SPL will be gained by pushing the
power into this zone, but typically not
more than 2dB, compared to the yellow
zone. The closer you are to the black
zone, the higher the likelihood of driver
failure. Operate with caution.
BLACK WARRANTY VOID:
We do not recommend operating
woofers at this level of power. In this
zone, there is a very high probability that
the driver will fail due to excessive heat
and/or mechanical stress.
Subwoofer drivers operated at
these levels of power are NOT
covered under warranty.
GREEN MINIMUM:
From a reliability standpoint, this zone
represents a very comfortable operating
power range for each driver. This level
of power will not stress the woofer but
will not extract all of its performance
potential, either.
Use of less than the minimum power
level will not damage the woofer, but may
result in unsatisfactory performance.
Thank you for purchasing a JL Audio W7 subwoofer driver. The W7
embodies JLAudios commitment to pushing the envelope of speaker
technology, with eight patented technologies, a design patent and a
completely unique set of component parts. Each W7 model has been
meticulously engineered to reproduce sub-bass with extreme fidelity
at any volume level, provided it is installed and tuned properly. Please
review the information in this document carefully so as to maximize your
enjoyment of the W7s capabilities.
Two enclosure recommendations are listed for each model,
one sealed and one ported. The sealed enclosure design will,
in most cases, give you the best overall sound quality and take up the
least space in your vehicle. The ported enclosure design will deliver
additional output over the sealed enclosure (about 3 - 4 dB more)
and will also maintain excellent sound quality, but it will require
significantly more space to install. The recommended ported
enclosure is not designed for peaky competition SPL performance,
it is designed for music listening. It will be very loud and sound extremely
good when set up properly.
An Introduction
When designing systems with W7 drivers, it is very important to achieve a good power match between the subwoofer amplifier and the subwoofer driver's capabilities. The power levels listed in the above
chart represent continuous (RMS) amplifier power per woofer and assume that the user will regularly make full use of that power without drastically overdriving (clipping) the amplifier(s). Make sure you
factor system impedance and the total number of subwoofers into your calculations. Adhering to these power recommendations will result in systems that are both reliable and enjoyable.
RECOMMENDED CONTINUOUS RMS POWER RANGE FOR ONE SUBWOOFER DRIVER:
In addition to the enclosure recommendations, we also provide
recommended amplifier settings for JL Audio amplifiers used with
W7s. Some of this information is also applicable with other brands of
amplifiers (like crossover points and slopes), some is not (like the voltage
levels specified for input sensitivity settings). You will notice that our
recommended settings do not include any bass EQ boost... this is because
W7’s rarely require any equalization to produce smooth frequency
response. If you have an equalizer in your system (or one is included in
your head unit or amplifier), defeat all bands below 125 Hz before dialing
in your new system settings. Please turn off all sound processing that
would affect the subwoofers (loudness circuits for example).
For optimum sub-bass performance, the amplifier input sensitivity
must be adjusted to avoid excessive distortion (clipping) of the
amplifier output. With W7 subwoofers, a clipped amplifier output will
manifest itself audibly as a low-level “mechanical sound coming from the
speakers. Proper input sensitivity setting will avoid this problem. Overly
high input sensitivity settings result in no additional clean output but will
result in poor sound quality and reduced speaker reliability.
Please consult the input sensitivity setting information on page 14 of this book.
250W 500W 1000W 2000W 4000W125W
2
1 - OverRoll™ Surround
(U.S. Patent #5,687,247 and #5,949,898)
By utilizing space wasted in conventional speakers, this
ground-breaking innovation controls the W7’s massive
excursion without sacrificing precious cone area.
2 - W-Cone™ (U.S. Patent #6,496,590)
The W-Cone™ is a unit-body cone assembly that delivers
astonishing cone stiffness with minimal mass. The shape
also provides incredible torsional rigidity, which is critical
to maintaining voice coil alignment at the suspension
limits.
3 - Floating-Cone™ Attach Method
(U.S. Patent #6,501,844)
Our newly conceived assembly technique ensures proper
surround geometry in the assembled speaker for better
excursion control and dynamic voice coil alignment.
A small detail that means a lot when you’re pumping the
cone to the excursion extremes the W7 is capable of.
4 - Plateau-Reinforced Spider Attachment
(U.S. Patent #6,118,884)
A derivative of JLAudio’s famous VRC technology, this
bulletproof suspension attachment relieves stress from
the spider material at high-excursions for enhanced
reliability.
5 - Radially Cross-Drilled Pole Piece
(U.S. Patent #6,243,479)
This innovative venting system greatly enhances
thermal dissipation and power handling by directing air
flow onto the voice coil former, working in conjunction
with technology #6.
6 - Massive Forced-Air-Cooled
Aluminum Alloy Frame (U.S. Patent #D472,891,
#6,219,431 and #6,229,902)
The elevated frame design of the W7 delivers cool air
through slots directly above the top-plate to the voice coil
of the speaker. This not only enhances power handling,
but also sound quality by minimizing dynamic parameter
shifts and power compression.
7 - Highly Linear, DMA-Optimized Motor System
DMA is JLAudios proprietary Dynamic Motor Analysis
system and is aimed at improving dynamic motor
behavior. As a result of DMA optimization, W7 motors
remain linear in motor force over an extreme range
of excursion and also maintain a highly stable fixed
magnetic field in the gap over a wide power range.
This leads to vastly reduced distortion and faithfully
reproduced transients... or put simply: tight, clean,
articulate bass.
8 - Huge Diameter, Progressive-Roll Spider
Arrived at after intense computer analysis and
optimization, the W7 spiders provide precise control
and motor/voice coil alignment without prematurely
limiting excursion.
9 - Co-Extruded Double Lead-Wires
The extruded casing and carefully engineered
attachments ensure controlled lead-wire behavior under
the most extreme excursion demands. Two conductors
are used per connection for ample current carrying
capability.
10 - Ultra-long Voice Coil
To allow extreme linear excursion, phenomenal power
handling and control, control, control.
W7 Technologies
In addition to the patented technologies listed above, multiple U.S. and International patents are currently pending.
WARNING: Prolonged exposure to high sound pressure levels can lead to permanent hearing loss. W7 subwoofers are
capable of reproducing sound at extremely high sound pressure levels. Please exercise restraint in the operation of your
system in order to preserve your hearing and your long-term enjoyment of this product’s sound quality capabilities.
3


Produktspezifikationen

Marke: JL Audio
Kategorie: Subwoofer
Modell: W7AE

Brauchst du Hilfe?

Wenn Sie Hilfe mit JL Audio W7AE benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Subwoofer JL Audio

Bedienungsanleitung Subwoofer

Neueste Bedienungsanleitung für -Kategorien-