JL Audio TW1 Bedienungsanleitung

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für JL Audio TW1 (5 Seiten) in der Kategorie Subwoofer. Dieser Bedienungsanleitung war für 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/5
12TW1-2 / 12TW1-4 Subwoofer Driver
Congratulations on your purchase of a JL Audio subwoofer component. Your JL Audio subwoofer
is a precision loudspeaker which has been engineered to produce the highest quality sub-bass
performance in your vehicle. Authorized JL Audio dealers have extensive technical information
for many different applications of your new speaker. They also have the knowledge, skills and tools
to build a high-quality enclosure that will maximize the performance of your speaker. We highly
recommend that you have your enclosure built by an authorized JL Audio dealer.
Inside you will find specifications and two recommended enclosures for your speaker; one is a
sealed enclosure, the other is a ported design. Both types of enclosures will give you excellent sound
quality and low-frequency extension. The sealed enclosure is a better choice if space is extremely
tight, but the ported enclosure will produce 3dB more output at the same power if you have the
extra space to work with.
OWNER’S MANUAL
2 JL AUDIO 12TW1-2 / 12T W1-4
SUBWOOFER 12TW1-2 12TW1-4
Free Air Resonance (Fs): 35.06 Hz 32.35 Hz
Electrical “Q (Qes): 0.610 0.555
Mechanical “Q” (Qms): 10.662 11.066
Total Speaker “Q” 0.577 0.529(Qts):
Equivalent Compliance (Vas): 1.008 ft3
28.54 litres
1.189 ft3
33.67 litres
One-way, Linear Excursion (Xmax)*: 0.40 in
10 mm
0.40 in
10 mm
Efficiency (1W/1m)**: 85.07 dB SPL 85.15 dB SPL
Effective Piston Area (Sd): 67.608 in2
0.0436 m2
67.608 in2
0.0436 m2
DC Resistance (Re): 2.430 ohm 3.514 ohm
Nominal Impedance: 2 ohm 4 ohm
Power Handling (continuous): 300 W 300 W
* Xmax specifications are derived via one-way voice coil overhang method with no correction factors applied.
** Efficiency (1W/1m) is not an accurate indicator of a subwoofer’s output capability and
should not be used as a comparison to other subwoofers to determine which one is “louder”!
A
C
D
B
E
F
JL AUDIO 12TW1-2 / 12TW1-4
U.S. PATENTS: #6,095,280 #8,374,379 #5,734,132 | Other U.S. & Foreign patents pending.
All specifications are subject to change without notice.
12TW1 SUBWOOFER PHYSICAL
SPECIFICATIONS
Nominal Diameter: 12.0 in.
300 mm
Overall Diameter (A): 12.375 in.
314 mm
Mounting Hole Diameter (B): 11.0625 in
281 mm
Bolt Hole Circle (C): 11.7 in.
297 mm
Magnet Diameter (D): 5.71 in.
145 mm
Mounting Depth (E): 4.62 in.
117 mm
Frontal Grille Protrusion (F): 0.87 in
22 mm
Net Weight: 16.5 lbs
7.5 kg
Driver Displacement: 0.072 ft3
2.04 litres
D
H
W
JL AUDIO 12TW1-2 / 12T W1-4 3
SUBWOOFER RECOMMENDED SEALED ENCLOSURES
Volume
(net int.)
External Dimensions
( epth)Width x Height x D
F3
(Hz)
Fc
(Hz) Qtc
12TW1-2 0.65 ft3
18.41 litres
26.50 in x 14.00 in x 5.50 in
673 mm x 356 mm x 140 mm 45.83 55.99 0.922
12TW1-4 0.65 ft3
18.41 litres
26.50 in x 14.00 in x 5.50 in
673 mm x 356 mm x 140 mm 45.44 54.41 0.890
All specifications are subject to change without notice.
SUBWOOFER RECOMMENDED PORTED ENCLOSURES
Volume
(net int.)
Enclosure External Dimensions
( epth)Width x Height x D
Slot Port Internal Dimensions
( lot lot S Width x S Height x Effective Port Length)
Tune to:
(Hz)
F3
(Hz)
12TW1-2 1.125 ft3
31.86 litres
31.75 in x 16.00 in x 7.00 in
806 mm x 406 mm x 178 mm
5.50 in x 2.25 in x 22.625 in
140 mm x 57 mm x 575 mm 34 31.52
12TW1-4 1.125 ft3
31.86 litres
31.75 in x 16.00 in x 7.00 in
806 mm x 406 mm x 178 mm
5.50 in x 2.25 in x 22.625 in
140 mm x 57 mm x 575 mm 34 31.79
! ! CAUTION ! !
Prolonged exposure to sound pressure levels in excess of 100dB can cause permanent hearing loss. This high-performance
speaker can exceed this level. Please exercise restraint in its operation in order to preserve your ability to enjoy its fidelity.
When installing a subwoofer in your vehicle, it is extremely important to secure the enclosure firmly. We recommend
bolting the enclosure through the metal of the floorpan or the frame of the vehicle with large diameter washers
for reinforcement. If an enclosure is not firmly attached, it can become a projectile in a collision. This is particularly
important in a hatchback, station wagon, sports utility vehicle, or van.
The enclosure recommendations listed are external
dimensions which assume the use of 3/4" (19mm)
thick material. If you are using thick 5/8" (16mm)
material, subtract from each dimension. 1/4" (6.5mm)
Do not use any material with a thickness of less than
5/8" (16mm) as this may compromise the rigidity of
the enclosure.
All enclosure volumes listed are net internal volumes!
Box volume displacement, port displacement and
brace displacement must be added to obtain the final
gross internal volume. All enclosure dimensions listed
have already taken this into account.
When using two subwoofers in a common
enclosure simply the required volume and, double
in the case of a ported enclosure, use the two times
recommended port(s).
We recommend the use of this speaker in a
bi-amplified system using high-quality satellite
speakers and amplifiers. We do not recommend
the use of this subwoofer with a passive crossover
(coil), as this type of device will adversely affect
performance.
All specifications are subject to change without notice.
W
H
D
SW
SH
PL
P Lort Wall ength:
20.75 in. (527 mm)
(End correction accounted for)

Produktspezifikationen

Marke: JL Audio
Kategorie: Subwoofer
Modell: TW1

Brauchst du Hilfe?

Wenn Sie Hilfe mit JL Audio TW1 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Subwoofer JL Audio

Bedienungsanleitung Subwoofer

Neueste Bedienungsanleitung für -Kategorien-