JL Audio Stealthbox SB-TE-3G1-10TW1 Bedienungsanleitung

JL Audio Nicht kategorisiert Stealthbox SB-TE-3G1-10TW1

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für JL Audio Stealthbox SB-TE-3G1-10TW1 (7 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 2 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/7
I N S T A L L A T I O N G U I D E
for the
SB-TE-3G1-10TW1
SKU# 94719
2017-Up Tesla Model 3
Installation requires appropriate tools and safety equipment.
Professional installation is recommended.
If you prefer to perform your own installation, please read this
installation guide completely before beginning.
Before cutting or drilling, check for potential obstacles behind
mounting surfaces.
Mount this product securely to prevent damage or injury in
severe conditions.
INSTALLATION
DIFFICULT Y:
EST IMAT ED T IME:
3 HOUR S
Enclosure Type: Sealed
Driver Type: 10TW1-2
Nominal Impedance: 2 ohms
Continuous Power Handling: 300 watts (RMS method)
Continued on Next Page
45
OUT
OF
SB-TE-3G1-10TW1 INSTR_SKU# 011578
I N C LUD E D H A R D WAR E
Continued on Next Page
Page 2 • JL Audio, Inc., 2023
SB-TE-3G1-10TW1 INSTR_SKU# 011578
4
3
7
2
8
6
9
5
1
* Not Shown
BOM ID DescriptionQty SKU
1 4 154693 1/4”-20 1-1/4” Black-Oxide Button Head Screw
2 4 154694 1/4” Black-Oxide Split Lock Washer
3 4 153684 1/4” Black-Oxide Flat Washer
4 2 154606 Lower Bracket
5 2 154605 Upper Bracket
6 4 154695 1/4”-20 7/8” Black-Oxide Flanged Button Head Screw
7 4 150064 1/4”-20 Hex Nut
8 4 151098 1/4” Split Lock Washer
9 4 151021 1/4” Flat Washer
- 1 151240 52” Rubber Edge Trim*
P O W E R R E C O M M E N D AT I O N
JL Audio recommends high quality ampliers such as the JL Audio XDM300/1. The diagram below shows the recommended crossover settings for the XDM300/1. For a detailed description of the
amplier settings, consult the owners manual for the amplier. If another amplier is being used, please reference this illustration and use similar settings on that amplier.
C O N N E C T I O N S
Using quality power, signal, and speaker wire is essential in ensuring the performance of your Stealthbo. JL Audio recommends using a 4 AWG power kit such as the XD-PCS4-1B for your
Stealthboamplier. Other kits are available should you be using more than one amplier. Signal wire such as the JL Audio Premium Audio Interconnect Cables should be used to provide signal for
both channels of the amplier. JL Audio recommends using 12 AWG speaker wire for subwoofers such as our XC-BCS12-25.
Continued on Next Page
Page 3 • JL Audio, Inc., 2023
SB-TE-3G1-10TW1 INSTR_SKU# 011578


Produktspezifikationen

Marke: JL Audio
Kategorie: Nicht kategorisiert
Modell: Stealthbox SB-TE-3G1-10TW1

Brauchst du Hilfe?

Wenn Sie Hilfe mit JL Audio Stealthbox SB-TE-3G1-10TW1 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert JL Audio

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-