JL Audio Stealthbox SB-T-TACDCG3/10TW3 Bedienungsanleitung

JL Audio Nicht kategorisiert Stealthbox SB-T-TACDCG3/10TW3

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für JL Audio Stealthbox SB-T-TACDCG3/10TW3 (5 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 100 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/5
I N S T A L L A T I O N G U I D E
for the
SB-T-TACDCG3/10TW3
SKU# 94654
2016 & Up Toyota Tacoma Double Cab
Thank you for choosing a JL Audio Stealthbox® for your automotive sound system.
With proper installation, your new vehicle-specific enclosed subwoofer system
will deliver years of listening pleasure.
We strongly recommend that you have your new Stealthbox® installed by your
authorized JL Audio dealer. The installation professionals employed by your
dealer have the necessary tools and experience to disassemble and reassemble
your vehicle properly. If you prefer to perform your own installation, please read
this installation guide completely before beginning the process.
If you choose to perform the installation yourself, it is absolutely
vital that the Stealthbox® be properly mounted to the vehicle
according to these instructions. Failure to mount the enclosure
properly presents two problems:
1) The sub-bass performance will suffer due to the movement of the
enclosure caused by the force exerted by the woofer(s).
2) A loose enclosure presents a serious safety hazard in the event of a
collision or sudden deceleration.
INSTALLATION
DIFFICULT Y:
EST IMATED T IME:
1 HOUR
Enclosure Type: Sealed
Driver Type: 10TW3-D4
Nominal Impedance: 2 ohms
Continuous Power Handling: 400 watts (RMS method)
Continued on Next Page
15
OUT
OF
SB-T-TACDCG3/10TW3 INSTR_SKU# 011495
I N C LUD E D H A R D W A R E
Continued on Next Page
Page 2 • JL Audio, Inc., 2017
SB-T-TACDCG3/10TW3 INSTR_SKU# 011495
BOM ID DescriptionQty SKU
1 2 151329 3/4” OD x 3/8” ID x 3/8” Spacer
2 2 153676 L-Bracket
3 2 151137 1/4 - 20 x 1” Hex Bolt
4 4 151098 1/4” Split Lock Washer
5 4 150485 1/4” Flat Washer
6 2 151359 M6-1 x 30mm Hex Head Screw
P O W E R R E C O M M E N D AT I O N
JL Audio recommends high quality ampliers such as the JL Audio XD300/1v2. The diagram below shows the recommended crossover settings for the XD300/1v2. For a detailed description of the
amplier settings, consult the owners manual for the amplier. If another amplier is being used, please reference this illustration and use similar settings on that amplier.
Rem. |
Oset | Signal
Input Voltage
Low | High
Turn-On Mode
Monoblock Subwoofer Amplifier
C O N N E C T I O N S
Using quality power, signal, and speaker wire is essential in ensuring the performance of your Stealthbox®. JL Audio recommends using a 4 AWG power kit such as the XD-PCS4-1B for your
Stealthboamplier. Other kits are available should you be using more than one amplier. Signal wire such as the JL Audio Premium Audio Interconnect Cables should be used to provide signal for
both channels of the amplier. JL Audio recommends using 12AWG speaker wire for subwoofers such as our XC-BCS12-25.
Continued on Next Page
Page 3 • JL Audio, Inc., 2017
SB-T-TACDCG3/10TW3 INSTR_SKU# 011495


Produktspezifikationen

Marke: JL Audio
Kategorie: Nicht kategorisiert
Modell: Stealthbox SB-T-TACDCG3/10TW3

Brauchst du Hilfe?

Wenn Sie Hilfe mit JL Audio Stealthbox SB-T-TACDCG3/10TW3 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert JL Audio

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-