JL Audio Stealthbox SB-KW-TRX4/10TW3 Bedienungsanleitung

JL Audio Nicht kategorisiert Stealthbox SB-KW-TRX4/10TW3

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für JL Audio Stealthbox SB-KW-TRX4/10TW3 (5 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/5
SB-KW-TRX4/10TW3 INSTR_SKU# 011451
Enclosure Type: Sealed
Driver Type: 10TW3-D4
Nominal Impedance: 2 ohms
Continuous Power Handling: 400 watts (RMS method)
I N S T A L L A T I O N G U I D E
for the
SB-KW-TRX4/10TW3
SKU# 94624
2015 & Up Kawasaki Teryx 4
Continued on Next Page
Thank you for choosing a JL Audio Stealthbofor your automotive sound system.
With proper installation, your new vehicle-specific enclosed subwoofer system
will deliver years of listening pleasure.
We strongly recommend that you have your new Stealthboinstalled by your
authorized JL Audio dealer. The installation professionals employed by your
dealer have the necessary tools and experience to disassemble and reassemble
your vehicle properly. If you prefer to perform your own installation, please read
this installation guide completely before beginning the process.
If you choose to perform the installation yourself, it is absolutely
vital that the Stealthbox® be properly mounted to the vehicle
according to these instructions. Failure to mount the enclosure
properly presents two problems:
1) The sub-bass performance will suffer due to the movement of the
enclosure caused by the force exerted by the woofer(s).
2) A loose enclosure presents a serious safety hazard in the event of a
collision or sudden deceleration.
INSTALLATION
DIFFICULT Y:
EST IMAT ED TIME:
1 H OU R
25
OUT
OF
I N C LU D E D H AR D WAR E
Continued on Next Page
Page 2 • JL Audio, Inc., 2016
SB-KW-TRX4/10TW3 INSTR_SKU# 011451
Note: For optimum performance, JL Audio recommends applying the included Foam Strips (or sound damping material) to surrounding plastic panels to reduce unwanted vibrations.
BOM ID Qty SKU Description
1 1 153693 Bracket
2 2 153737 3/8” Stainless Steel Flat Washer
3 2 153731 3/8” Stainless Steel Serrated Spring Lock Washer
4 2 153730 3/8 - 16 x 1-1/4” Stainless Steel Serrated Flange Bolt
- 2 151345 Wax Squares (not shown)
- 2 150249 Foam Strips (not shown)
P O W E R R E C OM M E N D AT I O N
JL Audio recommends high quality ampliers such as the JL Audio MX300/1. The diagram below shows the recommended crossover settings for the MX300/1. For a detailed description of the
amplier settings, consult the owner’s manual for the amplier. If another amplier is being used, please reference this illustration and use similar settings on that amplier.
C O N N E C T I O N S
Using quality power, signal, and speaker wire is essential in ensuring the performance of your Stealthbo. JL Audio recommends using an 8 AWG power kit such as the XD-PCS8-1B for your
Stealthbo amplier. Other kits are available should you be using more than one amplier. Signal wire such as the JL Audio Premium Audio Interconnect Cables should be used to provide signal for
both channels of the amplier. JL Audio recommends using 12AWG speaker wire for subwoofers such as the XC-BCS12-25.
Continued on Next Page
Page 3 • JL Audio, Inc., 2016
SB-KW-TRX4/10TW3 INSTR_SKU# 011451


Produktspezifikationen

Marke: JL Audio
Kategorie: Nicht kategorisiert
Modell: Stealthbox SB-KW-TRX4/10TW3

Brauchst du Hilfe?

Wenn Sie Hilfe mit JL Audio Stealthbox SB-KW-TRX4/10TW3 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert JL Audio

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-