JL Audio Stealthbox SB-J-JTGLAD/10TW1 Bedienungsanleitung

JL Audio Nicht kategorisiert Stealthbox SB-J-JTGLAD/10TW1

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für JL Audio Stealthbox SB-J-JTGLAD/10TW1 (5 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/5
I N S T A L L A T I O N G U I D E
for the
SB-J-JTGLAD/10TW1
SKU# 94681
2020 & Up Jeep Gladiator (JT)
Thank you for choosing a JL Audio Stealthbofor your automotive sound system.
With proper installation, your new vehicle-specific enclosed subwoofer system
will deliver years of listening pleasure.
We strongly recommend that you have your new Stealthbox® installed by your
authorized JL Audio dealer. The installation professionals employed by your
dealer have the necessary tools and experience to disassemble and reassemble
your vehicle properly. If you prefer to perform your own installation, please read
this installation guide completely before beginning the process.
If you choose to perform the installation yourself, it is absolutely
vital that the Stealthbox® be properly mounted to the vehicle
according to these instructions. Failure to mount the enclosure
properly presents two problems:
1) The sub-bass performance will suffer due to the movement of the
enclosure caused by the force exerted by the woofer(s).
2) A loose enclosure presents a serious safety hazard in the event of a
collision or sudden deceleration.
INSTALLATION
DIFFICULTY:
ESTIMAT ED TIME:
1 HOUR
Enclosure Type: Sealed
Driver Type: 10TW1-4
Nominal Impedance: 2 ohms
Continuous Power Handling: 600 watts (RMS method)
Continued on Next Page
15
OUT
OF
SB-J-JTGLAD/10TW1 INSTR_SKU# 011550
IN CL U DE D HAR DWA R E
4321 5
Continued on Next Page
Page 2 • JL Audio, Inc., 2020
SB-J-JTGLAD/10TW1 INSTR_SKU# 011550
BOM ID DescriptionQty SKU
1 1 152750 Passenger Bracket
2 4 153988 3/8” Flat Washer
3 4 153987 3/8” Split Lock Washer
4 4 154038 3/8 - 16 x 1-1/2” Hex Head Bolt
5 1 152749 Driver Bracket
P O W E R R E CO M M E N D A T I O N
JL Audio recommends high quality ampliers such as the JL Audio XD600/1v2. The diagram below shows the recommended crossover settings for the XD600/1v2. For a detailed description of the
amplier settings, consult the owner’s manual for the amplier. If another amplier is being used, please reference this illustration and use similar settings on that amplier.
C O N N EC T I O N S
Using quality power, signal, and speaker wire is essential in ensuring the performance of your Stealthbo. JL Audio recommends using a 4 AWG power kit such as the XD-PCS4-1B for your
Stealthboamplier. Other kits are available should you be using more than one amplier. Signal wire such as the JL Audio Premium Audio Interconnect Cables should be used to provide signal for
both channels of the amplier. JL Audio recommends using 12 AWG speaker wire for subwoofers such as our XC-BCS12-25.
Continued on Next Page
Page 3 • JL Audio, Inc., 2020
SB-J-JTGLAD/10TW1 INSTR_SKU# 011550


Produktspezifikationen

Marke: JL Audio
Kategorie: Nicht kategorisiert
Modell: Stealthbox SB-J-JTGLAD/10TW1

Brauchst du Hilfe?

Wenn Sie Hilfe mit JL Audio Stealthbox SB-J-JTGLAD/10TW1 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert JL Audio

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-