JL Audio Stealthbox SB-HY-VELOSTR/10TW3 Bedienungsanleitung

JL Audio Nicht kategorisiert Stealthbox SB-HY-VELOSTR/10TW3

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für JL Audio Stealthbox SB-HY-VELOSTR/10TW3 (7 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 6 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/7
I N S T A L L A T I O N G U I D E
for the
SB-HY-VELOSTR/10TW3
SKU# 94570
2011-2018 Hyundai Veloster
Thank you for choosing a JL Audio StealthboxÂŽ for your automotive sound system.
With proper installation, your new vehicle-specific enclosed subwoofer system
will deliver years of listening pleasure.
We strongly recommend that you have your new StealthboxÂŽ installed by your authorized
JL Audio dealer. The installation professionals employed by your dealer have the necessary tools
and experience to disassemble and reassemble your vehicle properly. If you prefer to perform your
own installation, please read this installation guide completely before beginning the process.
If you choose to perform the installation yourself, it is absolutely vital that
the Stealthbox ÂŽ be properly mounted to the vehicle according to these
instructions. Failure to mount the enclosure properly presents two problems:
1) The sub-bass performance will suffer due to the movement of the enclosure
caused by the force exerted by the woofer(s).
2) A loose enclosure presents a serious safety hazard in the event of a collision
or sudden deceleration.
Continued on Next Page
SB-HY-VELOSTR/10TW3 INSTR_SKU# 011355
INSTALLATION
D I F F I C U L T Y :
35
OUT
OF
ESTIMATED TIME:
23 HOURS
S P E C I F I C A T I O N S
Enclosure Type: Sealed
Driver Type: 10TW3-D4
Nominal Impedance: 2 ohms
Continuous Power Handling: 400 watts (RMS method)
I N C L U D E D H A R D W A R E
(2) 3/8 - 16 x 2-1/2” Bolt
(9) 3/8” Fender Washer
(4) 3/8” Flat Washer
(4) 3/8” Lock Washer
(6) 3/8 - 16 Hex Nut
SB-HY-VELOSTR/10TW3 INSTR_SKU# 011355
P O W E R R E C O M M E N D A T I O N
JL Audio recommends high quality ampliers such as the JL Audio XD300/1v2. The diagram below shows the recommended crossover settings for the XD300/1v2. For a detailed description of the amplier settings,
consult the owner’s manual for the amplier. If another amplier is being used, please reference this illustration and use similar settings on that amplier.
C O N N E C T I O N S
Using quality power, signal, and speaker wire is essential in ensuring the performance of your Stealthbox®. JL Audio recommends using a 4 AWG power kit such as the XD-PCS4-1B for your Stealthbox® amplier. Other kits
are available should you be using more than one amplier. Signal wire such as the JL Audio Premium Audio Interconnect Cables should be used to provide signal for both channels of the amplier. JL Audio
recommends using 12AWG speaker wire for subwoofers.
Continued on Next Page Page 2 • JL Audio, Inc., 2019
Continued on Next Page
SB-HY-VELOSTR/10TW3 INSTR_SKU# 011355
Page 3 • JL Audio, Inc., 2019
S T E P 4
Carefully unclip and remove the hatch sill panel.
S T E P 8
Carefully unclip the front of the rear seat cushion, and
remove the cushion.
S T E P 3
Unclip the cover on the passenger side rear seat back latch.
S T E P 7
Remove the bolts at the back of the rear seat cushion.
S T E P 2
Fold the rear seat back forward and remove the trunk floor.
S T E P 6
Remove the screws that hold the passenger side panel to
the floor.
S T E P 1
Empty the cargo area of the vehicle.
S T E P 5
Remove the screw that holds the rear of the passenger side
panel in place.


Produktspezifikationen

Marke: JL Audio
Kategorie: Nicht kategorisiert
Modell: Stealthbox SB-HY-VELOSTR/10TW3

Brauchst du Hilfe?

Wenn Sie Hilfe mit JL Audio Stealthbox SB-HY-VELOSTR/10TW3 benĂśtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert JL Audio

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung fĂźr -Kategorien-