JL Audio Stealthbox SB-F-FOC5DR/10TW3 Bedienungsanleitung

JL Audio Nicht kategorisiert Stealthbox SB-F-FOC5DR/10TW3

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für JL Audio Stealthbox SB-F-FOC5DR/10TW3 (6 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/6
I N S T A L L A T I O N G U I D E
for the
SB-F-FOC5DR/10TW3
SKU# 94560
2012 & Up Ford Focus 5 Door Hatchback
Thank you for choosing a JL Audio Stealthbox® for your automotive sound system.
With proper installation, your new vehicle-specific enclosed subwoofer system
will deliver years of listening pleasure.
We strongly recommend that you have your new Stealthbox® installed by your authorized
JL Audio dealer. The installation professionals employed by your dealer have the necessary tools
and experience to disassemble and reassemble your vehicle properly. If you prefer to perform your
own installation, please read this installation guide completely before beginning the process.
If you choose to perform the installation yourself, it is absolutely vital that
the Stealthbox ® be properly mounted to the vehicle according to these
instructions. Failure to mount the enclosure properly presents two problems:
1) The sub-bass performance will suffer due to the movement of the enclosure
caused by the force exerted by the woofer(s).
2) A loose enclosure presents a serious safety hazard in the event of a collision
or sudden deceleration.
Continued on Next Page
SB-F-FOC5DR/10TW3 INSTR_SKU# 011352
INSTALLATION
D I F F I C U L T Y :
25
OUT
OF
ESTIMATED TIME:
2 HOURS
S P E C I F I C A T I O N S
Enclosure Type: Acoustic Suspension (sealed)
Driver Type: 10TW3-D4
Nominal Impedance: 2 ohms
Continuous Power Handling: 400 watts (RMS method)
I N C L U D E D H A R D W A R E
(1) 3/8 - 16 x 2-1/2” Hex Bolt
(1) 3/8” Flat Washer
(2) 3/8” Split Lock Washer
(4) 3/8” Fender Washer
(2) 3/8 - 16 Hex Nut
SB-F-FOC5DR/10TW3 INSTR_SKU# 011352
P O W E R R E C O M M E N D A T I O N
JL Audio recommends high quality ampliers such as the JL Audio XD300/1v2. The diagram below shows the recommended crossover settings for the XD300/1v2. For a detailed description of the amplier settings,
consult the owners manual for the amplier. If another amplier is being used, please reference this illustration and use similar settings on that amplier.
C O N N E C T I O N S
Using quality power, signal, and speaker wire is essential in ensuring the performance of your Stealthbox®. JL Audio recommends using a 4 AWG power kit such as the XD-PCS4-1B for your Stealthbox® amplier. Other kits
are available should you be using more than one amplier. Signal wire such as the JL Audio Premium Audio Interconnect Cables should be used to provide signal for both channels of the amplier. JL Audio
recommends using 12AWG speaker wire for subwoofers.
Continued on Next Page Page 2 • JL Audio, Inc., 2016
Continued on Next Page
SB-F-FOC5DR/10TW3 INSTR_SKU# 011352
Page 3 • JL Audio, Inc., 2016
S T E P 4
Remove the trunk floor panel.
S T E P 8
Place a straight edge under the protruding stud, and
measure and mark 5-1/2” over from the vertical feature on
the fender well as shown.
S T E P 3
Empty out the cargo area of the vehicle.
S T E P 7
Pull the trunk liner and padding down and out from under
the plastic trim as shown.
S T E P 2
Pull back the inner fender panel as shown.
S T E P 6
Remove the two Torx screws from the passengers side
plastic trim.
S T E P 1
Using a panel tool, remove the two star nuts from the inner
fender panel of the passenger’s side rear tire well.
S T E P 5
Carefully unclip the rear sill panel, and remove the panel.


Produktspezifikationen

Marke: JL Audio
Kategorie: Nicht kategorisiert
Modell: Stealthbox SB-F-FOC5DR/10TW3

Brauchst du Hilfe?

Wenn Sie Hilfe mit JL Audio Stealthbox SB-F-FOC5DR/10TW3 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert JL Audio

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-