JL Audio J2 500.1 Bedienungsanleitung

JL Audio Hi-Fi-Anlage J2 500.1

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für JL Audio J2 500.1 (9 Seiten) in der Kategorie Hi-Fi-Anlage. Dieser Bedienungsanleitung war für 9 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/9
Thank you for purchasing a JL Audio amplifier for
your automotive sound system.
Your amplifier has been designed and manufactured to exacting
standards in order to ensure years of musical enjoyment in your vehicle.
For maximum performance, we highly recommend that you have
your new amplifier installed by an authorized JL Audio dealer. Your
authorized dealer has the training, expertise and installation equipment
to ensure optimum performance from this product. Should you
decide to install the amplifier yourself, please take the time
to read this manual thoroughly so as to familiarize yourself
with its installation requirements and setup procedures.
If you have any questions regarding the instructions in this
manual or any aspect of your amplifier’s operation, please contact your
authorized JL Audio dealer for assistance. If you need further assistance,
please call our Technical Support Department
at (954) 443-1100 during business hours.
owner’s manual
500W Monoblock Subwoofer Amplifier
J2_500_1_MAN_CH.indd 1 4/22/09 11:24:38 AM
2 JL AudioÂŽ
PROTECT YOUR HEARING!
We value you as a long-term customer. For
that reason, we urge you to practice restraint in
the operation of this product so as not to damage
your hearing and that of others in your vehicle.
Studies have shown that continuous exposure to
high sound pressure levels can lead to permanent
(irreparable) hearing loss. This and all other
high-power amplifiers are capable of producing
such high sound pressure levels when connected
to a speaker system. Please limit your continuous
exposure to high volume levels.
While driving, operate your audio system in
a manner that still allows you to hear necessary
noises to operate your vehicle safely (horns,
sirens, etc.).
SERIAL NUMBER
In the event that your amplifier requires
service or is ever stolen, you will need to
have a record of the product’s serial number.
Please take the time to enter that number in
the space provided below. The serial number
can be found on the bottom panel of the
amplifier and on the amplifier packaging.
Serial Number:
INSTALLATION APPLICATIONS
This amplifier is designed for operation in
vehicles with 12V, negative-ground electrical
systems. Use of this product in vehicles with
positive ground and/or voltages other than 12V
may result in damage to the product and will void
the warranty.
This product is not certified or approved for
use in aircraft.
Do not attempt to “bridge” the outputs of this
amplifier with the outputs of a second amplifier,
including an identical one.
Reversed | Normal
Output Polarity
LP Filter Frequency (Hz)Input Sens. Bass Boost
min max 40 0 +12dB13 O
Power
Remote
Level
Port LEFT
RIGHT
LEFT
RIGHT
Preamp
Outputs
Amplifier
Inputs
Lef tt & Righ
Preamp Output Jacks
(pg. 8) Lef tt & Righ
Preamp Input Jacks
(pg. 6)
R eemot
Lev tel Por
(pg. 8)
Power/P tion rotec
Status Indicator
(pg. 9)
Output Polarity
Switch
(pg. 7)
Bass Boost
Control
(pg. 8)
Filter
Frequency Selector
(pg. 7)
Input Sensitivity
Control
(pg. 6)
C+12 V wer Po
Connec rto
(pg. 5)
Fuses
(pg. 5)
Remote T
Conne
(pg.
J2_500_1_MAN_CH.indd 2-3
4 JL AudioÂŽ
ProduCt desCriPtion
The JL Audio J2-500.1 is a monoblock
subwoofer amplifier utilizing Class B
technology. Its frequency response is limited
to the range below 125 Hz. It is not designed
for driving midrange speakers or tweeters.
It has been optimized for low-frequency
amplification. For detailed specifications,
please refer to Appendix B (page 11).
tYPiCal installation sequenCe
The following represents the sequence
for a typical amplifier installation, using an
aftermarket source unit or OEM Interface
product. Additional steps and different
procedures may be required in some applications.
If you have any questions, please contact your
authorized JL Audio dealer for assistance.
1) Disconnect the negative battery post
connection and secure the disconnected cable
to prevent accidental re-connection during
installation. This step is not optional!
2) Run power wire (minimum 4 AWG)
from the battery location to the amplifier
mounting location, taking care to
route it in such a way that it will not be
damaged and will not interfere with
vehicle operation. Use 2 AWG or 1/0
AWG power wire if additional amplifiers
are being installed with the J2-500.1.
3) Connect power wire to the positive battery
post. Fuse the wire with an appropriate fuse
block (and connectors) within 18 inches (45
cm) wire length of the positive battery post.
This fuse is essential to protect the vehicle.
Do not install the fuse until the power wire
has been connected to the amplifier.
4) Run signal cables (RCA cables) and remote
turn-on wire from the source unit to the
amplifier mounting location.
5)
Run speaker wire from the speaker systems
to the amplifier mounting location.
6)
Find a good, solid metal grounding point
close to the amplifier and connect the negative
power wire to it using appropriate hardware.
Use minimum 4 AWG power wire, no longer
than 36 inches (90 cm) from the amplifier to
the ground connection point. In some vehicles,
it may be necessary to upgrade the battery
ground wire. (See page 5 for important notice).
7)
Securely mount the amplifier using
appropriate hardware.
8)
Connect the positive and negative power
wires to the amplifier.
9)
Connect the remote turn-on wire
to the amplifier.
10)
Connect the RCA input cables
to the amplifier.
11)
Connect the speaker wires to the amplifier.
12)
Carefully review the amplifier’s control
settings to make sure that they are set according
to the needs of the system.
13)
Install power wire fuse (60A for a single J2-500.1)
and reconnect the negative battery post terminal.
14)
Turn on the source unit at a low level
to double-check that the amplifier is configured
correctly. Resist the temptation to crank it up
until you have verified the control settings.
15)
Make necessary adjustments to the input
sensitivity controls to obtain the right
overall output and the desired balance
in the system. See Appendix A (page 10)
for the recommended input sensitivity
setting method.
16)
Enjoy the fruits of your labor with your
favorite music.
J2_500_1_MAN_CH.indd 4-5

Produktspezifikationen

Marke: JL Audio
Kategorie: Hi-Fi-Anlage
Modell: J2 500.1

Brauchst du Hilfe?

Wenn Sie Hilfe mit JL Audio J2 500.1 benĂśtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Hi-Fi-Anlage JL Audio

JL Audio

JL Audio J2 500.1 Bedienungsanleitung

29 Juli 2024
JL Audio

JL Audio J2 360.2 Bedienungsanleitung

28 Juli 2024
JL Audio

JL Audio G1700 Bedienungsanleitung

27 Juli 2024
JL Audio

JL Audio J2 1000.1 Bedienungsanleitung

25 Juli 2024
JL Audio

JL Audio XD6001 Bedienungsanleitung

24 Juli 2024
JL Audio

JL Audio XD400/4 Bedienungsanleitung

22 Juli 2024
JL Audio

JL Audio J2 320.4 Bedienungsanleitung

20 Juli 2024
JL Audio

JL Audio MX600/3 Bedienungsanleitung

20 Juli 2024
JL Audio

JL Audio J2 250.1 Bedienungsanleitung

17 Januar 2024
JL Audio

JL Audio SlamPak SLPK-CAN-SPYDER1 Bedienungsanleitung

1 November 2022

Bedienungsanleitung Hi-Fi-Anlage

Neueste Bedienungsanleitung fĂźr -Kategorien-

Lenco

Lenco MC-129 MP3 Bedienungsanleitung

16 Oktober 2024
Akai

Akai EIE Pro Bedienungsanleitung

14 Oktober 2024
Sennheiser

Sennheiser SZI 1029 Bedienungsanleitung

7 Oktober 2024
Yamaha

Yamaha MusicCast SRT-1500 Bedienungsanleitung

7 Oktober 2024
Kicker

Kicker 46HDTPH Bedienungsanleitung

7 Oktober 2024
Vtech

Vtech V-Kids Bedienungsanleitung

5 Oktober 2024
Hitachi

Hitachi AX-M10E Bedienungsanleitung

5 Oktober 2024
IDance

IDance XD8N Bedienungsanleitung

5 Oktober 2024
LD Systems

LD Systems DAVE 18 G3 Bedienungsanleitung

4 Oktober 2024
Pyle Pro

Pyle Pro PWMA1216BM Bedienungsanleitung

4 Oktober 2024