JL Audio FiX 82 Bedienungsanleitung

JL Audio Audio/Video-Konverter FiX 82

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für JL Audio FiX 82 (16 Seiten) in der Kategorie Audio/Video-Konverter. Dieser Bedienungsanleitung war für 12 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/16

Thank you for purchasing a JL Audio FiX™ OEM

interface / processor for your automotive sound system.

This product has been designed and manufactured to exacting

standards in order to ensure years of musical enjoyment in your vehicle.

For maximum performance, we highly recommend that you have your

FiX™ 82 installed by an authorized JL Audio dealer. Your authorized

dealer has the training, expertise and installation equipment to ensure

optimum performance from this product without compromising your

vehicle’s functionality. Due to the complexity of modern vehicle systems,

we do not recommend self-installation unless you have extensive

experience in automotive electrical systems. Should you decide to install

this product yourself, please take the time to read this manual

thoroughly to familiarize yourself with its installation requirements

and setup procedures.

If you have any questions regarding the instructions in this manual or

any aspect of the product’s operation, please contact your authorized JL

Audio dealer for assistance. If you need further assistance, please contact

the JL Audio Technical Support Department at technical@jlaudio.com

or call (954) 443–1100 during business hours.

OWNER’S MANUAL

Protect Your Hearing!

We value you as a long-term customer. For that reason, we urge you to practice

restraint in the operation of this product so as to not damage your hearing and

that of others in your vehicle. Studies have shown that continuous exposure

to high sound pressure level can lead to permanent (irreparable) hearing loss.

Automotive sound systems are capable of producing such high sound pressure

levels. Please limit your continuous exposure at high volumes. While driving,

operate your audio system in a manner that still allows you to hear necessary

noises to operate your vehicle safely (horns, sirens, etc.).

Installation Applications

This product is designed for operation in vehicles with 12 volt, negative-ground

electrical systems. Using this product in systems with positive ground and/or

voltages other than 12 volts may result in damage to the product and will void

the warranty. This product is not certified or approved for use in aircraft.

Safety Considerations

• Install this product in a dry, well-ventilated location that does not interfere

with your vehicle’s safety equipment (air bags, seat belt systems,

ABS brake systems, etc.).

• Securely mount this product so that it does not come loose in the event of a

collision or sudden jolt to the vehicle.

• Check before drilling to make sure that you will not be drilling into a gas tank,

brake line, wiring harness or other vital vehicle system.

• Do not run system wiring outside or underneath the vehicle. This is an

extremely dangerous practice, which can result in severe damage/injury.

• Protect all system wires from sharp metal edges and wear by carefully routing

them, tying them down and using grommets and loom where appropriate.

What’s Included

(1) FiX™ 82 processor

(1) 5-pin Power Connector plug

(4) 4-pin OEM Analog Input plugs

(4) Mounting screws

(1) FIX™ Calibration CD

Product Overview

The FiX™ 82 is the ultimate tool for building a great sounding system using the

OEM source. Equipped with a powerful 24-bit DSP processor, the FiX™ 82 delivers

world-class sound and incredible functionality allowing the integration of

complex factory source units with aftermarket audio equipment. It combines a

level matching, summing preamp with delay and frequency response correction,

all housed within a single chassis.

The FiX™ 82 may be used to perform the following functions:

1. Eight differential-balanced inputs accept virtually any OEM analog audio

signal, from low-voltage, line-level to high power, amplified speaker-level,

and converts them to digital audio with 24-bit effective resolution.

2. Compatible with full-range and band-limited OEM signals, outputs from

factory 2-way, 3-way or 4-way stereo systems are automatically summed

into a complete, full-range stereo signal.

3. Factory filtered or “tuned” signals are automatically restored back to a flat,

full-range audio output. These digital-domain corrections can vary from

subtle to dramatic, depending on the amount of equalization engineered

into the factory audio system.

4. Time delayed OEM signals are automatically corrected into a

synchronized output.

5. A simple calibration process performs signal summing, EQ restoration and

time-delay correction tasks automatically.

6. Digitally corrected signals can then be sent to your aftermarket signal

processors or amplifiers via two methods:

• Analog audio through a stereo pair of low-distortion, 4-volt (RMS)

line-level outputs

• Digital audio through an optical (Toslink) output, supporting PCM

audio (S/PDIF) 24bit/48kHz

7. Differential-balanced input architecture ensures noise immunity and

compatibility with most analog output OEM source units or amplifiers.

8. Selectable turn-on options for activation include: conventional 12-volt

trigger, automatic via Signal-Sensing or automatic via DC Offset-Sensing.

9. Provides a dedicated remote turn-on voltage output for activating

aftermarket amplifiers or signal processors.

10. JLID Controller Port allows connection of the optional DRC-100 Digital

Remote Controller (sold separately), adding Master Volume Control,

Handsfree Optimization Mode and LED Status Reporting capabilities from

the driver’s seat.

11. USB port provides access to update firmware and advanced options.

The FiX™ 82 may be used as a standalone integration device, sending

crystal-clear audio to your amplifiers or as a gateway to world-class sound by

using it with our TwK™ System Tuning DSP (sold separately).

Planning Your Installation

It is important that you take the time to read this manual and that you plan

your installation carefully. It is very easy to damage expensive vehicle systems

in modern automobiles. Never assume that you have found appropriate wires

without consulting a reliable wiring diagram or without performing signal

testing with proper test equipment. If you are uncomfortable or unfamiliar with

reading diagrams or testing signals, please enlist the services of your authorized

JL Audio dealer to perform the installation.

Produktspezifikationen

Marke:	JL Audio
Kategorie:	Audio/Video-Konverter
Modell:	FiX 82

Brauchst du Hilfe?

Wenn Sie Hilfe mit JL Audio FiX 82 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Audio/Video-Konverter JL Audio

JL Audio TwK 88 Bedienungsanleitung

3 August 2024

JL Audio LoC 22 Bedienungsanleitung

16 Juli 2024

JL Audio FiX 82 Bedienungsanleitung

23 Januar 2024

Bedienungsanleitung Audio/Video-Konverter

Neueste Bedienungsanleitung für -Kategorien-

Abus TVAC20001 Bedienungsanleitung

11 Oktober 2024

Cambridge DacMagic Bedienungsanleitung

4 Oktober 2024

König KN-HDMICON26 Bedienungsanleitung

2 Oktober 2024

LevelOne GVM-1101 Bedienungsanleitung

30 September 2024

StarTech.com VS123HD Bedienungsanleitung

26 September 2024

StarTech.com VS421HDDP Bedienungsanleitung

26 September 2024

StarTech.com ST228MX Bedienungsanleitung

26 September 2024

StarTech.com HDMI2DVI Bedienungsanleitung

26 September 2024

StarTech.com VGANTSCPRO Bedienungsanleitung

26 September 2024

StarTech.com CPNT2VGAA Bedienungsanleitung

26 September 2024