JL Audio 10W6 Bedienungsanleitung
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für JL Audio 10W6 (2 Seiten) in der Kategorie Automatischer Subwoofer. Dieser Bedienungsanleitung war für 17 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/2
10W6
23.2 Hz
0.432
0.463
6.567
2.30 65.1
0.469 11.9
84.2 dB
53.6 0.0346
10.8 Ω (in series)
Dual 6 Ω
300 Watts
12W6
20.9 Hz
0.433
0.462
6.897
5.73 162.3
0.438 11.1
86.9 dB
82.5 0.0532
10.8 Ω (in series)
Dual 6 Ω
300 Watts
8W6
32.5 Hz
0.466
0.511
5.500
0.79 22.4
0.388 9.9
83.6 dB
30.7 0.0198
10.6 Ω (in series)
Dual 6 Ω
200 Watts
Subwoofer Specifi cations
Fs (free-air resonance):
Qts (total speaker “Q”):
Qes (electrical “Q”):
Qms (mechanical “Q”):
Vas (equivalent compliance):
Xmax (linear excursion one-way):
Effi ciency (1W/1m)*:
Sd (effective piston surface area):
Re (DC resistance):
Znom (nominal impedance):
Pt (continuous thermal power handling):
Sealed Enclosure
•Enclosure dimensions listed are external dimensions which assume the use of 0.75 inch (19mm) thick material. If you are using
0.625 inch (16mm) thick material, subtract 0.25 inches (6.5mm) from each dimension. Do not use material with a thickness of
less than 0.625 inches (16mm).
•Enclosure volumes listed are NET internal volumes. Driver displacement, port displacement and brace displacement must be
added to obtain the fi nal gross volume. The dimensions listed have already taken this into account.
•When using two subwoofers in a common enclosure simply double the required volumes and use two of the recommended ports
(when needed). Likewise, when using three subwoofers in a common enclosure simply triple the required volume and number
of ports (when needed).
*Effi ciency (1W/1m) is not an accurate indicator of a subwoofer’s output capability and should not be used as a
comparison to other subwoofers to determine which one is “louder”!
Ported Enclosure
H
D
W
H
D
W
ft3liters
in. mm
ft3liters
in. mm
ft3liters
in. mm
Be sure to allow 0.75 inches (19mm) for pole vent clearance on this driver.
Physical Dimensions
Frame Diameter (A):
Mounting Hole Diameter (B):
Mounting Depth (C):
Overall Depth (D):
Magnet Diameter (E):
Displacement:
in. mm
in. mm
in. mm
in. mm
in. mm
ft3liters
AB
C
D
E
Normal Recommended Enclosures (single driver)
Port
(inside dia. X length)
Model
Sealed
Enclosure
Ported
Enclosure
16” x 9” x 8”
406mm x 229mm x 203mm
8W6
15” x 10” x 12.25”
381mm x 254mm x 311mm
2.5” X 15.4”
0.375 ft3
64mm X 391mm
0.625 ft3
width X height X depthVolume (Net Int.)
10.6 l
17.7 l
18” x 11” x 9”
457mm x 279mm x 229mm
10W6
17” x 12” x 13.75”
432mm x 305mm x 349mm
3” X 18.6”
0.625 ft3
76mm X 472mm
1.00 ft3
width X height X depthVolume (Net Int.)
17.7 l
28.3 l
18” x 13” x 13.75”
457mm x 330mm x 349mm
12W6
20” x 14” x 17.75”
508mm x 356mm x 451mm
TWO 2.5” X 13.6”
1.25 ft3
TWO 64mm X 345mm
2.25 ft3
width X height X depthVolume (Net Int.)
35.4 l
63.7 l
in2m2in2m2in2m2
8.25
7
4.25
4.6875
4.875
0.035
209.55
177.8
107.95
119.06
123.82
0.989
in. mm
in. mm
mm
in. mm
in. mm
ft3liters
10.125
9.125
4.875
5.5
6.5
0.06
257.17
231.77
123.82
139.7
165.1
1.696
in.
in. mm
in. mm
mm
in. mm
in. mm
ft3liters
12.25
11.0625
5.625
6.5
6.5
0.085
311.15
280.98
142.87
165.1
165.1
2.403
in.
8W6 10W6 12W6
•Do NOT use different impedance speakers when using multiple subwoofers!
•JL Audio recommends using subwoofers as part of a bi-amplifi ed system using high quality satellite speakers like our Evolution line
of coaxial and component speakers. We do not recommend the use of passive crossover components (coils) on subwoofers. These
components may adversely affect the performance of a subwoofer.
•When dealing with exceedingly long port lengths, we recommend the use of JL Audio’s Flex-Port System. The Flex-Port tubing is
fl exible, allowing it to fi t in otherwise tight locations. The Port mouths provide not only a convenient method of securing the port,
but a smooth, rounded edge for the port termination as well.
With coils wired in parallel, a dual 6Ω speaker will present a 3Ω load. With coils wired in series, a dual 6Ω speaker will present a 12Ω load.
With coils AND speakers wired in parallel:
2 dual 6Ω speakers (D6) will present a 1.5Ω load.
With the coils wired in series and the speakers wired in parallel:
2 dual 6Ω speakers (D6) will present a 6Ω load.
With coils AND speakers wired in parallel:
3 dual 6Ω speakers (D6) will present a 1Ω load.
With the coils wired in series and the speakers wired in parallel:
3 dual 6Ω speakers (D6) will present a 4Ω load.
Produktspezifikationen
| Marke: | JL Audio |
| Kategorie: | Automatischer Subwoofer |
| Modell: | 10W6 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit JL Audio 10W6 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Automatischer Subwoofer JL Audio
25 August 2024
24 August 2024
24 August 2024
24 August 2024
24 August 2024
24 August 2024
23 August 2024
23 August 2024
23 August 2024
22 August 2024
Bedienungsanleitung Automatischer Subwoofer
- Automatischer Subwoofer Kenwood
- Automatischer Subwoofer ESX
- Automatischer Subwoofer Phoenix Gold
- Automatischer Subwoofer Autek
Neueste Bedienungsanleitung für -Kategorien-
27 August 2024
27 August 2024
27 August 2024
27 August 2024
27 August 2024
27 August 2024
27 August 2024
27 August 2024
31 Juli 2024
19 Juli 2024