JL Audio 10W3v3-4 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für JL Audio 10W3v3-4 (4 Seiten) in der Kategorie Autolautsprecher. Dieser Bedienungsanleitung war für 6 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
10W3v3-2 / 10W3v3-4 / 10W3v3-8
Subwoofers
o w n e r s m a n u a l
Congratulations on your purchase of a JL Audio subwoofer component. Your JL Audio subwoofer is a
precision loudspeaker which has been engineered to produce the highest quality sub-bass performance
in your vehicle. Authorized JL Audio dealers have extensive technical information for many different
applications of your new speaker. They also have the knowledge, skills and tools to build a high-quality
enclosure that will maximize the performance of your speaker. We highly recommend that you have your
enclosure built by an authorized JL Audio dealer.
Inside you will find specifications and two recommended enclosures for your speaker; one is a sealed
enclosure, the other is a ported design. Both types of enclosures will give you excellent sound quality and
low-frequency extension. The sealed enclosure is a better choice if space is extremely tight, but the ported
enclosure will produce 3dB more output at the same power if you have the extra space to work with.
If you decide to build one of these enclosures yourself, you must have the construction of the box
inspected and approved by your authorized JL Audio dealer in order for the 1 year limited warranty to
be valid. Please read the warranty information carefully.
2 JL AUDIO 10W3v3-2/10W3v3-4/10W3v3-8
SUBWOOFER 10W3v3-2 10W3v3-4 10W3v3-8
Free Air Resonance (Fs): 32.97 Hz 31.49 Hz 32.60 Hz
Electrical “Q” (Qes): 0.533 0.523 0.534
Mechanical “Q” (Qms): 7.027 7.017 6.590
Total Speaker “Q” 0.495 0.485 0.494(Qts):
Equivalent Compliance (Vas): 1.136 f
32.17 litres
1.138 f
32.23 litres
1.136 f
32.17 litres
One-way, Linear Excursion (Xmax)*: 0.550 in.
14.0 mm
0.550 in.
14.0 mm
0.550 in.
14.0 mm
Efficiency (1W/1m)**: 85.37 dB SPL 84.87 dB SPL 85.22 dB SPL
Effective Piston Area (Sd): 53.475 in²
0.0345 m²
53.475 in²
0.0345 m²
53.475 in²
0.0345 m²
DC Resistance (Re): 1.7 ohm 3.567 ohm 7.240 ohm
Nominal Impedance: 2 ohm 4 ohm 8 ohm
Power Handling (continuous): 300W 300W 300W
* Xmax specifications are derived via one-way voice coil overhang method with
no correction factors applied.
** Efficiency (1W/1m) is not an accurate indicator of a subwoofers output capability and should
not be used as a comparison to other subwoofers to determine which one is “louder” !
!
#
$
"
%
10W3v3 SUBWOOFER PHYSICAL
SPECIFICATIONS
Nominal Diameter: 10.0 in.
250 mm
Overall Diameter (A): 10.5 in.
267 mm
Mounting Hole Diameter (B): 9.0625 in.
230 mm
Bolt Hole Circle (C): 9.7 in.
246.5 mm
Magnet Diameter (D): 5.25 in.
133 mm
Mounting Depth (E): 5.93 in.
151 mm
Net Weight: 12.25 lbs.
5.56 kg
Driver Displacement: 0.049 ft³
1.39 litres
JL AUDIO 10W3v3-2 / 10W3v3-4 / 10W3v3-8
U.S. PATENTS : #5,734,734 #6,501,844 #6,219,431 #D480,709 Other U.S. & Foreign patents pending.
“EL(Port Extension Length)
10W3v3-2: 11.125 in. (283 mm)
10W3v3-4: 15.5 in. (394 mm)
10W3v3-8: 11.75 in. (298 mm)
10W3v3: 13.75 in. (349 mm)
JL AUDIO 10W3v3-2/10W3v3-4/10W3v3-8 3
SUBWOOFER RECOMMENDED SEALED ENCLOSURES
Volume
(net int.)
External Dimensions
( epth)Width x Height x D
F3
(Hz)
Fc
(Hz) Qtc
10W3v3-2 0.625 ft³
17.7 litres
18 in. x 11 in. x 9 in.
457 mm x 279 mm x 229 mm 48.3 55.3 0.831
10W3v3-4 0.625 ft³
17.7 litres
18 in. x 11 in. x 9 in.
457 mm x 279 mm x 229 mm 46.9 52.9 0.818
10W3v3-8 0.625 ft³
17.7 litres
18 in. x 11 in. x 9 in.
457 mm x 279 mm x 229 mm 47.8 54.7 0.829
All specifications are subject to change without notice.
SUBWOOFER RECOMMENDED PORTED ENCLOSURES
Volume
(net int.)
Enclosure External Dimensions
( epth)Width x Height x D
Slot Port Specs
Slot Area x Slot Length
Rec. Slot Port Internal Dimensions
S S H S Llot Width x lot eight x lot ength
Tune to:
(Hz)
F3
(Hz)
10W3v3-2 1.25 f
35.4 litres
23 in. x 12 in. x 12.125 in.
584 mm x 305 mm x 308 mm
13.125 sq. in. x 24.75 in.
84.7 sq. cm. x 629 mm
1.25 in. x 10.5 in. x 24.75 in.
32 mm x 267 mm x 629 mm 32.0 31.4
10W3v3-4 1.125 ft³
31.9 litres
23 in. x 12 in. x 13.125 in.
584 mm x 305 mm x 333 mm
13.125 sq. in. x 24.75 in.
84.7 sq. cm. x 629 mm
1.25 in. x 10.5 in. x 28.625 in.
32 mm x 267 mm x 727 mm 31.8 31.7
10W3v3-8 1.25 f
35.4 litres
23 in. x 12 in. x 13.75 in.
584 mm x 305 mm x 349 mm
13.125 sq. in. x 24.75 in.
84.7 sq. cm. x 629 mm
1.25 in. x 10.5 in. x 25.5 in.
32 mm x 267 mm x 648 mm 31.7 31.3
! ! CAUTION ! !
Prolonged exposure to sound pressure levels in excess of 100dB can cause permanent hearing loss. This high-performance
speaker can exceed this level. Please exercise restraint in its operation in order to preserve your ability to enjoy its fidelity.
When installing a subwoofer in your vehicle, it is extremely important to secure the enclosure firmly. We recommend
bolting the enclosure through the metal of the floorpan or the frame of the vehicle with large diameter washers for
reinforcement. If an enclosure is not firmly attached, it can become a projectile in a collision. This is particularly important
in a hatchback, station wagon, sports utility vehicle, or van.
The enclosure recommendations listed are external
dimensions which assume the use of 3/4" (19mm)
thick material. If you are using thick 5/8" (16mm)
material, subtract from each dimension. 1/4" (6.5mm)
Do not use any material with a thickness of less than
5/8" (16mm) as this may compromise the rigidity of
the enclosure.
All enclosure volumes listed are net internal volumes!
Box volume displacement, port displacement and
brace displacement must be added to obtain the final
gross internal volume. All enclosure dimensions listed
have already taken this into account.
When using two subwoofers in a common
enclosure simply double the required volume and,
in the case of a ported enclosure, use the two times
recommended port(s).
We recommend the use of this speaker in a
bi-amplified system using high-quality satellite speakers
and amplifiers. We do not recommend the use of this
subwoofer with a passive crossover (coil), as this type
of device will adversely affect performance.


Produktspezifikationen

Marke: JL Audio
Kategorie: Autolautsprecher
Modell: 10W3v3-4

Brauchst du Hilfe?

Wenn Sie Hilfe mit JL Audio 10W3v3-4 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Autolautsprecher JL Audio

Bedienungsanleitung Autolautsprecher

Neueste Bedienungsanleitung für -Kategorien-