JL Audio 10TW3-D4 Bedienungsanleitung
JL Audio
Automatischer Subwoofer
10TW3-D4
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für JL Audio 10TW3-D4 (4 Seiten) in der Kategorie Automatischer Subwoofer. Dieser Bedienungsanleitung war für 6 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/4
10TW3 Subwoofer Driver
Congratulations on your purchase of a JL Audio subwoofer component. Your JL Audio subwoofer
is a precision loudspeaker which has been engineered to produce the highest quality sub-bass
performance in your vehicle. Authorized JL Audio dealers have extensive technical information
for many different applications of your new speaker. They also have the knowledge, skills and tools
to build a high-quality enclosure that will maximize the performance of your speaker. We highly
recommend that you have your enclosure built by an authorized JL Audio dealer.
Inside you will find specifications and two recommended enclosures for your speaker; one is a
sealed enclosure, the other is a ported design. Both types of enclosures will give you excellent sound
quality and low-frequency extension. The sealed enclosure is a better choice if space is extremely
tight, but the ported enclosure will produce 3dB more output at the same power if you have the
extra space to work with.
OWNER’S MANUAL
2 JL AUDIO 10TW3-D4 / 10TW3-D8
A1
B
D
E
C
A2
JL AUDIO 10TW3-D4 / 10TW3-D8 10TW3 Dual Voice Coil Wiring
Please Note: The TW3 is a dual voice coil driver.
BOTH voice coils must be connected to the amplifier
(in series or parallel) for the speaker to operate
properly. To accomplish this, each TW3 features a pair
of main input connection push-terminals for each
voice coil. Verify that the connections are properly
configured based on these wiring diagrams to
achieve the desired load prior to sending signal to
the subwoofer.
All specifications are subject to change without notice.
* Xmax specifications are derived via one-way voice coil overhang method with no correction factors applied.
** Efficiency (1W/1m) is not an accurate indicator of a subwoofer’s output capability and should not be used as a comparison to
other subwoofers to determine which one is “louder” !
*** Re (DC resistance) is measured with the voice coils in series, for parallel-wired specification divide Re by 4. All other specifications
remain the same.
AMPLIFIER
AMPLIFIER
AMPLIFIER
AMPLIFIER
AMPLIFIER
AMPLIFIER
8Ω (D4)
16Ω (D8)
4Ω (D4)
8Ω (D8)
2.7Ω (D4)
5.3Ω (D8)
2Ω (D4)
4Ω (D8)
1Ω (D4)
2Ω (D8)
0.7Ω (D4)
1.3Ω (D8)
AMPLIFIER
AMPLIFIER
AMPLIFIER
AMPLIFIER
AMPLIFIER
AMPLIFIER
8Ω (D4)
16Ω (D8)
4Ω (D4)
8Ω (D8)
2.7Ω (D4)
5.3Ω (D8)
2Ω (D4)
4Ω (D8)
1Ω (D4)
2Ω (D8)
0.7Ω (D4)
1.3Ω (D8)
Voice Coils Wired in Series
(Multiple speakers wired in Parallel)
Voice Coils Wired in Parallel
(Multiple speakers wired in Parallel)
10TW3 SUBWOOFER
PHYSICAL SPECIFICATIONS
Nominal Diameter: 10.0 in
250 mm
Overall Major Diameter (A1): 11.2 in
284 mm
Overall Minor Diameter (A2): 10.5 in
267 mm
Mounting Hole Diameter (B): 9.625 in
244 mm
Bolt Hole Circle (C): 10.5 in
267 mm
Magnet Diameter (D): 5.1 in
130 mm
Mounting Depth (E): 3.25 in
83 mm
Net Weight: 10.1 lbs
4.6 Kg
Driver Displacement: 0.019 ft3
0.54 liters
SUBWOOFER 10TW3-D4 10TW3-D8
Free Air Resonance (Fs): 32.300 Hz 39.262 Hz
Electrical “Q” (Qes): 0.656 0.825
Mechanical “Q” (Qms): 11.350 9.840
Total Speaker “Q” (Qts): 0.620 0.761
Equivalent Compliance (Vas): 0.700 ft3
19.82 litres
0.510 ft3
14.44 litres
One-way, Linear Excursion
(Xmax)*:
0.60 in
15.2 mm
0.60 in
15.2 mm
Efficiency (1W/1m)**: 82.10 dB SPL 82.27 dB SPL
Effective Piston Area (Sd): 56.532 in2
0.0365 m2
56.532 in2
0.0365 m2
DC Resistance (Re)***: 9.036 ohm 15.008 ohm
Nominal Impedance: Dual 4-ohm
voice coils
Dual 8-ohm
voice coils
Power Handling (continuous): 400 W 400 W
Prolonged exposure to sound pressure levels in excess of 100dB can cause permanent hearing loss. This high-performance
speaker can exceed this level. Please exercise restraint in its operation in order to preserve your ability to enjoy its fidelity.
When installing a subwoofer in your vehicle, it is extremely important to secure the enclosure firmly. We recommend
bolting the enclosure through the metal of the floorpan or the frame of the vehicle with large diameter washers
for reinforcement. If an enclosure is not firmly attached, it can become a projectile in a collision. This is particularly
important in a hatchback, station wagon, sports utility vehicle, or van.
JL AUDIO 10TW3-D4 / 10TW3-D8 3
SUBWOOFER RECOMMENDED SEALED ENCLOSURE
Volume
(net int.)
External Dimensions
(Width x Height x Depth)
F3
(Hz)
Fc
(Hz) Qtc
10TW3-D4 0.50 ft3
14.2 liters
16 in. x 13.875 in. x 6.5 in.
406 mm x 352 mm x 165 mm 40.09 50.04 0.9605
10TW3-D8 0.575 ft3
16.3 liters
16.75 in. x 15 in. x 6.5 in.
425 mm x 381 mm x 165 mm 41.61 53.93 1.0453
All specifications are subject to change without notice.
!! CAUTION !!
• The enclosure recommendations listed are external
dimensions which assume the use of 3/4" (19mm)
thick material. If you are using 5/8" (16mm) thick
material, subtract 1/4" (6.5mm) from each dimension.
Do not use any material with a thickness of less than
5/8" (16mm) as this may compromise the rigidity of
the enclosure.
• Enclosure volumes listed are net internal volumes!
Box volume displacement, port displacement and
brace displacement must be added to obtain the
final gross internal volume. All enclosure dimensions
listed have already taken this into account.
• When using two subwoofers in a common
enclosure simply double the required volume.
• We recommend the use of this speaker in a bi-amplified
system using high-quality satellite speakers and
amplifiers. We do not recommend the use of this
subwoofer with a passive crossover (coil), as this type of
device will adversely affect performance.
SUBWOOFER RECOMMENDED PORTED ENCLOSURE
Volume
(net int.)
Enclosure External Dimensions
(Width x Height x Depth)
Slot Port Internal Dimensions
(Slot Width x Slot Height x Slot Length)
Tune to:
(Hz)
F3
(Hz)
10TW3-D4 0.60 ft3
17 liters
30 in. x 14.625 in. x 5.125 in.
762 mm x 372 mm x 130 mm
3.625 in. x 2.125 in. x 31.0625 in
92 mm x 54 mm x 789 mm 32.14 32.11
10TW3-D8 0.75 ft3
21.2 liters
30 in. x 16.375 in. x 5.25 in.
762 mm x 416 mm x 133 mm
3.75 in. x 2.125 in. x 26.8125 in
95 mm x 54 mm x 681 mm 31.33 29.54
W
H
D
SW
SH
PL
Port Wall Length:
10TW3-D4: 26.375 in (670 mm)
10TW3-D8: 25 in (635 mm)
(End correction accounted for)
Produktspezifikationen
| Marke: | JL Audio |
| Kategorie: | Automatischer Subwoofer |
| Modell: | 10TW3-D4 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit JL Audio 10TW3-D4 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Automatischer Subwoofer JL Audio
25 August 2024
24 August 2024
24 August 2024
24 August 2024
24 August 2024
24 August 2024
23 August 2024
23 August 2024
23 August 2024
22 August 2024
Bedienungsanleitung Automatischer Subwoofer
- Automatischer Subwoofer Kenwood
- Automatischer Subwoofer ESX
- Automatischer Subwoofer Phoenix Gold
- Automatischer Subwoofer Autek
Neueste Bedienungsanleitung für -Kategorien-
27 August 2024
27 August 2024
27 August 2024
27 August 2024
27 August 2024
27 August 2024
27 August 2024
27 August 2024
31 Juli 2024
19 Juli 2024