Jablotron BM-01 Nanny Bedienungsanleitung
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Jablotron BM-01 Nanny (2 Seiten) in der Kategorie Babyphone. Dieser Bedienungsanleitung war für 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/2
Baby monitor BM-01A “Nanny“ 4/4 MFV51303 Baby monitor BM-01A “Nanny“ 1/4 MFV51303
• Do not use a mattress made of hard material such as expanded polystyrene – it may
result in the failure of the device (such materials are extremely sensitive to air
movements).
• Please be aware that the device can only warn you in the case of an emergency. If
the baby has a medical problem, it is up to you or a doctor to help.
• Manufacturer provides warranty for the product itself. The warranty is not valid for
batteries and manufacturer is not responsible if the product is not used according to
this manual.
Battery replacement
If the batteries are low, the yellow indicator will flash and there will be no beep sound
after it is tuned on. In this case replace the batteries. Use only 2 new size AA alkaline batteries
(orientation is clearly marked in the battery compartment). Switch the Nanny on after battery
replacement and you should hear a beep sound. If there is no beep, check the batteries.
Maintenance and cleaning
The Nanny does not require any regular maintenance. Regular testing of the device is
recommended (once a week).
Use a soft wet cloth to clean the device when necessary (no aggressive cleaning agent
should be used). Avoid water or any other liquid getting inside the control unit or inside the
sensor pad. Protect the sensor pad from physical damage (impacts, falls, bending etc. can
damage the sensor).
Specifications:
Power 3 V, 2x 1,5 V size AA alkaline batteries
Stand by consumption 0.2 mA
Average battery life time 6 months (frequent testing makes it shorter)
Recommended weight of user from min. 2 kg to max. 15 kg
Sensor pad model BM-01D, size max. 350 x 550 x 15 mm,
weight 1500 g, made of PVC-P
Control unit size max. 135 x 70 x 35 mm, weight 150 g, made of ABS
Working environment +5°C to +35°C, rel. humidity 30% to 75%
Storage environment 0°C to +40°C, rel.humidity 10% to 85%
Lifetime of the product 2 years.
Contents: sensor pad, control unit, extension cable, splitting connector.
Conformity assessment was accomplished by the Notified Body No.1014.
It was also approved by the Ministry of Health Care of the Czech Republic under registration number
564B/02 and 564C/02.
Hereby, Jablotron Ltd., declares that this BM-01 is in compliance with the essential requirements
and other relevant provisions of Directive 1993/42/EC.
Original of the conformity assessment can be found at the web page
www.jablotron.cz, section Technical support.
Note: Dispose of batteries safely depending on the type of the batteries
and local regulation. Although this product does not contain any harmful
materials we suggest you to return the product to the dealer or directly to
the producer after usage.
BM-01A “Nanny“ Baby Monitor
Congratulations to you and your newborn baby and to your wisdom in
purchasing the ”Nanny”. Not only will your child be sleeping peacefully!
Description
The BM-01 „Nanny“ continuously checks your baby’s breathing and movements
to confirm the absence of a possible danger. The Nanny triggers an acoustic and
visual alarm if breathing stops for longer than 20 seconds or if the rate of breathing
is bellow 8 breaths per minute. This allows for Apnea (Sudden Infant Death
Syndrome) and other life threatening conditions to be indicated in time to save the
child.
The BM-01 sensor pad, positioned under the bed’s mattress, detects the gentle
movements of an infant’s chest. Signals from the sensor go to the control unit, which
confirms regular breathing or movements. The device has no physical contact with
the baby and it also does not generate any form of energy. So it cannot have any
harmful effect to the human body.
Baby monitor BM-01A “Nanny“ 2/4 MFV51303 Baby monitor BM-01A “Nanny“ 3/4 MFV51303
Installation
1. Place the sensor pad on the bed bottom as shown in the diagram. Place
the mattress on the sensor pad and be sure that the sensor is well positioned
with the mattress using the following guidelines:
• Center of the sensor pad should be approximately in the position of where the
baby’s chest will be
• Pad should be on a smooth & solid surface – It should not be bent!!.
• If there is only a spring grid supporting the bed, place a solid board (wood,
plywood etc.) between the pad and the spring grid.
• If you want to use the Nanny in multiple beds, use extra sensor pads (item number
BM-01D). Install them in each bed and change only the location of the control unit.
• Up to two sensor pads can be used in each bed with a single control unit if the
child is large.
2. Connecting batteries to the control unit (battery compartment is on the rear
side of the control unit):
• Use only 2 new size AA alkaline batteries.
• Polarity of the batteries is clearly marked in the battery compartment.
• Close the battery cover and turn the switch to position I.
• If the batteries are OK, you will hear a beep and the indicators will flash.
• Switch the unit OFF again (position 0)
• If there is no beep after turning ON, check the batteries.
3. Attaching the control unit to the bed – using the fastening belt
• The unit should be visible and should not by covered by anything
• For bigger children we recommend to locate the unit out of their reach
4. Connecting the sensor’s cable to the unit – you should hear a click
• Route the cable in such a way that there is no slack long enough to make a loop.
For bigger children the cable should be out of their reach
• If you do not use the entire length of the cable, fix the excess firmly under the
mattress.
• If you position the control unit in another room, use the extension cable (5m),
which is provided with the set. Only one extension cable can be used.
• If you use two sensor pads in a bed, a cable splitter is provided in the set.
• To disconnect the cable from the unit – press the connector tab towards the cable
Switch and Indicators
Switch – position 0 = OFF, I = ON
Red indicator – flashing when there is an ALARM
Green indicator – a short flash indicates a breath or a movement of the baby
Yellow indicator – flashing indicates low batteries
Operation
A. Put the baby to bed.
B. Turn on the unit (confirmed by a beep and a flash of all LED indicators)
C. The green led indicator will flashes as the baby breathes or moves
D. Turn off the unit before you take the baby out of the bed.
ALARM
If the baby is not breathing for longer than 20 seconds, or the breath rate is too slow, an
alarm signal will sound and the red indicator will flash.
Check the baby and provide first aid if necessary (make sure that there are no reasons
for choking, start resuscitation, call for emergency help). In some cases of Apnea the sound of
the unit itself can wake the baby up and he/she will start to breath again on his/her own.
Alarm can be stopped by the switching the unit off.
There may be rare cases of false alarms, especially when the child is crawling and moves
off the sensor pad.
Testing
You can test function of the Nanny in the following way (should be tested once a week):
1. If the baby is in the bed and the unit is ON, the green indicator should flash as the
baby is breathing or moving.
2. Leave the unit ON and take the baby out of the bed.
• The green indicator may continue to blink for a certain time (vibrations of
the bed caused by the baby’s removal)
• Do not hold or touch the bed – the device may detect your breathing
3. When the flashing has stopped for 20 seconds, the unit will make warning beeps and will
start the alarm sound
• The red indicator should flash when the alarm is triggered.
• Stop alarm by turning the switch on the unit OFF.
If the device does not work as described above, check that:
• There is a beep after switching it on. If not, check the batteries.
• After taking the baby out of the bed the green indicator stops flashing (within a
minute or so) – if not, the device is detecting some intrusive vibrations – see
following warning.
Important warning:
• The Nanny is a very sensitive instrument, capable of sensing a sleeping baby’s
breathing. Intrusive vibrations of the bed, the floor or the entire building can influence
its performance. The bed should not be in physical contact with another bed (which
is used by another person or animal) or with any device that generates vibrations.
Intrusive vibrations can also be caused by a powerful air movement (fan, air-
conditioning…), by walking close the bed and by other sources. If you move the bed
to a new location, you should test the Nanny before you use it.
Produktspezifikationen
| Marke: | Jablotron |
| Kategorie: | Babyphone |
| Modell: | BM-01 Nanny |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Jablotron BM-01 Nanny benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Babyphone Jablotron
18 August 2024
4 August 2024
Bedienungsanleitung Babyphone
- Babyphone Tristar
- Babyphone Basetech
- Babyphone Belkin
- Babyphone Hama
- Babyphone Manhattan
- Babyphone Medion
- Babyphone Nedis
- Babyphone Philips
- Babyphone SilverCrest
- Babyphone Concept
- Babyphone Tefal
- Babyphone IKEA
- Babyphone Technaxx
- Babyphone Alecto
- Babyphone Beurer
- Babyphone Cresta
- Babyphone Denver
- Babyphone EMOS
- Babyphone König
- Babyphone Medisana
- Babyphone Grundig
- Babyphone Trebs
- Babyphone Esscom
- Babyphone Topcom
- Babyphone Geemarc
- Babyphone Motorola
- Babyphone Elro
- Babyphone EZVIZ
- Babyphone Olympia
- Babyphone Switel
- Babyphone Hyundai
- Babyphone Gigaset
- Babyphone Tesla
- Babyphone GOCLEVER
- Babyphone Withings
- Babyphone Babymoov
- Babyphone Chicco
- Babyphone Fysic
- Babyphone Sanitas
- Babyphone Terraillon
- Babyphone Beaba
- Babyphone Hartig And Helling
- Babyphone NUK
- Babyphone Reer
- Babyphone Fisher-Price
- Babyphone Lupilu
- Babyphone Ariete
- Babyphone BabyOno
- Babyphone Jane
- Babyphone Luvion
- Babyphone Tommee Tippee
- Babyphone Ansmann
- Babyphone Duux
- Babyphone Tigex
- Babyphone TRENDnet
- Babyphone Summer
- Babyphone First Alert
- Babyphone Alcatel
- Babyphone Amplicomms
- Babyphone Audioline
- Babyphone Binatone
- Babyphone Brondi
- Babyphone Swissvoice
- Babyphone Vtech
- Babyphone Kodak
- Babyphone Nova
- Babyphone Lionelo
- Babyphone TOMY
- Babyphone Safety 1st
- Babyphone Graco
- Babyphone Oricom
- Babyphone Albrecht
- Babyphone Uniden
- Babyphone Kogan
- Babyphone D-Link
- Babyphone Eufy
- Babyphone TrueLife
- Babyphone HQ
- Babyphone Cobra
- Babyphone Neno
- Babyphone Grixx
- Babyphone Angelcare
- Babyphone Babyfon
- Babyphone IBaby
- Babyphone Lindam
- Babyphone Neonate
- Babyphone SereneLife
- Babyphone Snuza
- Babyphone Xblitz
- Babyphone Foscam
- Babyphone Oregon Scientific
- Babyphone Lorex
- Babyphone Duronic
- Babyphone Fischer Price
- Babyphone Hartig Helling
- Babyphone Heimvision
- Babyphone MicroTalk
- Babyphone Modern-Electronics
- Babyphone Oretti
- Babyphone Pabobo
- Babyphone Philips-Avent
- Babyphone Chipolino
- Babyphone British Telecom
- Babyphone Bebetel
- Babyphone Levana
- Babyphone BT
- Babyphone Summer Infant
- Babyphone Joblotron
- Babyphone Mobi
- Babyphone Hubble Connected
- Babyphone Axvue
- Babyphone Babysense
- Babyphone LeamsiQ
- Babyphone BabySafe
- Babyphone Chillax Baby
- Babyphone Peekyboo
Neueste Bedienungsanleitung für -Kategorien-
9 Oktober 2024
8 Oktober 2024
7 Oktober 2024
3 Oktober 2024
2 Oktober 2024
2 Oktober 2024
2 Oktober 2024
1 Oktober 2024
1 Oktober 2024
30 September 2024