ITT BIG 300 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für ITT BIG 300 (25 Seiten) in der Kategorie Festnetztelefonie. Dieser Bedienungsanleitung war für 17 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/25
BIG 300 User manual 11x15_8giu.indd 1 13/06/12 11.26
USER MANUAL - ENGLISH
Thank you for purchasing this new Caller ID phone. To ensure trouble-free operation,
please read these instructions carefully before beginning installation.
1. Installation
Connecting the telephone
▪ Insert 3 AA size batteries in the battery compartment at the base unit bottom.
▪ Connect one end of the handset coil cord into the jack in the handset and insert the other
end into the jack located at the left side of the phone.
▪ Connect one end of the line cord to the telephone line wall socket and the other end to the
backside of the telephone.
Caution:
The telephone line needs to be disconnected prior to opening the battery door!
Calculator
Volume/VIP
Delete
Musiconhold
Handsfree
Redial/Pause
Memorystorekey
Onetouchmemory
Onetouchmemory
Onetouchmemory
CallbackReviewTel number
Backward
Upward
Keypad illustration
2. Setting Menu
During the setting mode, press FLASH/SET to enter. LCD shows
when nish each item, press FLASH/SET again to conrm or press DEL to back to
submenu, press to exit.
BIG 300 User manual 11x15_8giu.indd 2-3 13/06/12 11.26
2.1 SET DATE/TIME:
When LCD displays , press “1” to enter calendar setting, then LCD
display: 1-DATE 2-CL.
1. Press “1” directly to set the date, LCD will display, “ d 2009 01-01”, “09 01-01 ” is twin-
king, input numbers of year, month and date directly. Press DEL to back to submenu.
2. Press 2” directly set the time, LCD will display ,
is twinkling, input numbers of hour and minute directly.
3. Press “FLASH/SET” to conrm, and then press to exit.
LCD display illustration:
2.2 SET RINGER/RINGER VOLUME ADJUSTABLE:
When LCD displays press “2” to enter ringer/ringer volume setting.
Then LCD will display
1. Press “1” to select normal ringer melody, LCD displays and press
“UP” or “DOWN” to set the desired melody.
2. Press “2” to select VIP ringer melody, LCD displays and press
“UP” or “DOWN” to set the desired melody.
3. Press “3” to adjust the 4 level ringer volumes. LCD displays to
choose your desired volume by using “UP”/ “DOWN” buttons. (1 is the lowest and 4 is the
highest, the default is 4)
4. During each step, press “FLASH/SET” to conrm, and then press to exit.
2.3 SET THE ALARM CLOCK:
When LCD displays Press “3” to enter alarm clock setting. Then LCD
will display , is twinkling. indicates there are 3
sets alarm time can be setted. The rst alarm time is one-time alarm, the second and the
third alarm time is daily alarm.
1 Press “1” to enter the rst alarm time setting, LCD shows ,
is twinkling. Directly input the alarm time.
2 Press “2” to enter the second alarm time setting. LCD shows ,
is twinkling, directly input the alarm time.
3 Press “3” to enter the third alarm time setting. LCD shows ,
is twinkling, directly input the alarm time.
During each step, press “FLASH/SET” to conrm and to exit.
Remark: The rst alarm time is only available for one time.
The second and third alarm time can work all the time if this unit is not out of power.
During the alarm clock rings, press any key to end its ringing.
2.4 SET DO-NOT- Disturb
This function allows the unit not ring during the do not disturb time, except the VIP calling.
When LCD displays Press “4” to enter do-not-disturb time setting.
Then LCD will display , is twinkling , input time directly.
Remark: the rst means hour and the second means minutes.
During each step, press “FLASH/SET” to conrm and to exit.
BIG 300 User manual 11x15_8giu.indd 4-5 13/06/12 11.26


Produktspezifikationen

Marke: ITT
Kategorie: Festnetztelefonie
Modell: BIG 300

Brauchst du Hilfe?

Wenn Sie Hilfe mit ITT BIG 300 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten