IStarUSA BPU-350SATA-KL Bedienungsanleitung

IStarUSA Festplatten-Array BPU-350SATA-KL

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für IStarUSA BPU-350SATA-KL (2 Seiten) in der Kategorie Festplatten-Array. Dieser Bedienungsanleitung war für 9 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/2

BPU 0SATA 3 Hard Drive Cage-35 .5”

User’s Manual

Specicaon:

Order Informaon:

Hot Swap

5x3.5”HDD

Cooling Fan

1x80mm

Standard Drive Bays

5.25” Drive: 3

Dimension (W x H x D)

5.75 x 4.96 x 8.11 inches

Material

Aluminum Design with Conducve Dissipaon

Grooves

HDD Interface

SATA / SAS

Weight

4bs

Cable

SATA Cable Included (5pcs)

Model Number:

Color:

UPC Code:

BPU 0SATA BLACK -35 -

BPU SATA RED -350 -

BPU SATA BLUE -350 -

BPU SATA SILVER -350 -

BPU 350SATA BPL- -

(lockable handle)

Black

Red

Blue

Silver

Plasc

846813022606

846813000604

846813000598

846813000611

846813016087

Introducon:

Create more space for hard drive with hot swap capability, by using the BPU- -

350SATA HDD cage series that supports RAID 1/0/1+0/5 conguraon for high

performing data recovery or redundancy applicaon. Its aluminum construcon

translates into lighter system weight and better heat dissipaon. The 80mm fan

also help keeps hard drives at maximum performance temperature.

Features:



Aluminum Frame, Aluminum cover



Interface: Support SAS-I and SAS-II, SATA-I, SATA-II, SATA-III



High performance transfer rate: up to 6.0 GB/s for SAS & SATA hard drives



Plug & play, hot swappable



SATA 15Pin & 4Pin Power connectors



LED for P/S, HDD access, Fan sensor & Buzzer



Power Control Switch



3-stage temperature alarm sengs & reset switch for buzzer alarm



8cm cooling fan X1



Dim: 8.11(L) X 5.75(W) X 4.96(H) inch



Patent products with advanced structure design



Patent balance handle-No skew in/out problem & avoid the abrasion during

connecon



Precisely connecon on connector

Hardware Informaon: Front View

D 1 ~ D 5:- - Power Switch & HDD LED. Power On: LED indicates Blue. Purple color blinking

for HDD access.

D 6-: Reset Switch & Overheat LED. Power On: LED indicates Blue. Overheat (default 55º

C): LED indicate Red and buzzer alarms. Press the Reset Switch (D 6) to stop the alarm -

for 3 minutes.

D 7:- Fan senor LED. Fan On: LED indicates Blue. Fan O: LED indicates Red and buzzer

alarms. Press the Reset Switch (D 6) to stop the alarm. -

(If you want to switch o the “Alarm funcon”, press the Reset Switch (D 6) for more -

than 6 seconds unl 3 beeps comes out, then the “Alarm funcon” stopped.)

BPU 0SATA-35

iStarUSA – Powered by iStarUSA Group

727 Phillips Drive

City of Industry, CA 91748

Tel: (888) 989 1189-

Email: sales@istarusa.com

BPU 350SATA-

Hardware Informaon: Rear View

POWER1: 4pin Power connector.

POWER2: 15pin Serial ATA Power connector.

(may use any two type of power connector)

HD1 HD5— : 7pin Serial ATA Signal connector

JP1: Temperature seng jumper (default: 55º C)

J5: FAN RPM Switch: HIGH & AUTO Oponal.

(Every me when you turn on the power, the fan runs for 10 seconds and then

stop. It will run again when temperature reaches º C40 .)

J6: HD LED Switch (default: Enable)

JP1 Jumper pin seng:

Quick Installaon Procedure:

1. Open up the handle bar from the tray; take out the HD trays from the HD

cage.

2. Secure all screws to the HD aached with HD tray.

3. Place the hard drive tray(s) with HD installed, back into the cage unit.

4. Push the handling bar into closed posion.

5. Connect all necessary data and power cable onto the rear end of cage

unit.

(Make sure that the date cables connected to the motherboard side as

well).

6. Turn on the Power of your computer and wait unl Operang System

nish loading up.

7. Turn on all necessary HD1~HD4 Power Buon(s) for each Hard Drive

installed.

Note:

For steps 6 if the operang system installed with a HD inside of HD cage, please make -

sure you do turn on the Power from the cage switches D1/D2/D3/D4 or D5.

For oponal RAID Conguraon & Setup procedure, please follow the user manual

instrucons from your SAS/SATA Controller Card or Motherboard.

Accessories:

 5 SATA cables

 Screws

2.5” or 3.5” Hard Drive Disk to the trays Installaon:

1. Insert 2.5” or 3.5” Hard Drive into the

HDD Tray from the cage.

2. Use the provided screws and fasten HD

into highlighted 2.5” or 3.5” holes to the

cage trays.

3. Make sure Secure with screw holes from

the Boom of 2.5” or 3.5” Hard Drive’s.

4. Aer the screw installaon, slide the HDD

Tray back to the HDD Canister Base.

5. Next, follow the Quick Installaon in next

page for the rest of the Setup.

Oponal Accessories:

iStarUSAcare:

We will help you navigate our website to nd the informaon that

you need. Go to www.istarusa.com, and click on live chat bubble

above the Search Bar

Our technicians are standing by to take your quesons. Visit

hp://istarusa.com/support/ , and you will receive a technical

support cket to help track your requests from the beginning to the

end. Or you can contact us @ 888 989 1189- -

FCC and CE Radiation Norm

FCC

This equipment has been tested and found to comply with limits for Class B digital device pursuant to Part of Federal Communications 15

Commission (FCC) rules.

This equipment has been tested and found to comply with the limits of the European Council Directive on the approximation of the law of the member

states relating to electromagnetic compatibility (89/336/EEC) according to EN 55022 Class B.

FCC and CE Compliance Statement

These limits are designed to provide reasonable protection against frequency interference in residential installation. This equipment generates uses

and can radiate radio frequency energy, and if not installed or used in accordance with the instructions may cause harmful interference to radio

communication. However, there is no guarantee that interference will not occur in television reception, which can be determined by turning the

equipment off and on. The user is encouraged to try and correct the interference by one or more of the following measures: Reorient or relocate the

receiving antenna, Increase the separation between the equipment and the receiver, connect the equipment into an outlet on a circuit different from

that to which the receiver is connected to.

CAUTION!

The Federal Communications Commission warns the user that changes or modifications to the unit not expressly approved by the party responsible

for the compliance could void the user’s authority to operate the equipment.

HD Trays

Model Number

UPC Code:

Black

Red

Blue

Silver

Plasc

BPU-HSTRAY BLACK-

BPU-HSTRAY-RED

BPU-HSTRAY BLUE-

BPU-HSTRAY SILVER-

BPU-HSTRAY

846813000635

846813000659

846813000642

846813000673

846813000628

BPU 0ATA-35

BPU 0SATA-35

BPU 0SATA-35 BPU 0SATA-35

3.5” HD Screw Holes

HD Tray: Bottom View

2.5” HD

Screw Holes

3.5” HD Screw Holes

Produktspezifikationen

Marke:	IStarUSA
Kategorie:	Festplatten-Array
Modell:	BPU-350SATA-KL
Breite:	146 mm
Tiefe:	209.5 mm
Mitgelieferte Kabel:	SATA
Produktfarbe:	Schwarz
Höhe:	126 mm
Eingebaut:	Ja
Installierte Speichertreiber:	Nein
Typ des installierten Speicherlaufwerks:	Nein
Gesamte installierte Speicherkapazität:	- TB
Unterstützte Speicherlaufwerke:	HDD & SSD
Anzahl der unterstützten Speicherlaufwerke:	5
Maximal unterstützte Speicherkapazität:	- TB
RAID Level:	JBOD
Gehäusetyp:	Desktop
Nachhaltigkeitszertifikate:	RoHS
Speicherlaufwerk Schnittstelle:	Serial ATA, Serial ATA II, Serial ATA III
Anzahl Lüfter:	1 Lüfter
Datenübertragungsrate:	6 Gbit/s
Größe des Speicherlaufwerks:	2.5/3.5 "
Im laufenden Betrieb wechselbare Gehäuseschächte:	Ja
Host Anschlüsse:	5
SATA-Host-Anschluss:	Ja