Iomega StorCenter Pro NAS 150d Server Bedienungsanleitung
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Iomega StorCenter Pro NAS 150d Server (70 Seiten) in der Kategorie Server. Dieser Bedienungsanleitung war für 6 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/70
Iomega® StorCenter™ Pro NAS 150d Server
Iomega, the stylized "i" logo, StorCenter, and all Iomega brand blocks are either registered trademarks or trademarks of
Iomega Corporation in the United States and/or other countries. Microsoft and Windows are either registered
trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Mac, Macintosh, and
AppleTalk are registered trademarks or trademarks of Apple Computer Inc. in the United States and/or other countries.
Certain other product names, brand names, and company names may be trademarks or designations of their respective
owners.
Safety Information
Observe the following guidelines when performing any work on your Iomega® StorCenter™
Pro:
1. Follow all instructions marked on the Iomega StorCenter Pro and in the
documentation.
2. Use only the power supply cable provided with the Iomega StorCenter Pro. Always use
the appropriate power supply cable for your country.
3. Unplug the Iomega StorCenter Pro from the Uninterruptible Power Supply (UPS) before
cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning.
4. Do not use the Iomega StorCenter Pro near water. Do not spill liquid on or into the
Iomega StorCenter Pro.
5. Do not place the Iomega StorCenter Pro on an unstable surface.
6. Openings in the Iomega StorCenter Pro cabinet are provided for ventilation and should
not be blocked or covered.
7. Make sure the Iomega StorCenter Pro has ample ventilation (at least 6" or 127 mm) in
front and behind the Iomega StorCenter Pro. Do not place the Iomega StorCenter Pro
near or on a radiator or heat register.
8. Do not walk on the power cord or allow anything to rest on it.
9. Do not open the Iomega StorCenter Pro. Opening the Iomega StorCenter Pro will void
your warranty.
10. This product is equipped with a three-wire grounding plug (a plug with a grounding
pin). This plug will only fit into a grounded power outlet. This is a safety feature. If
you are unable to insert the plug into an outlet, contact an electrician to install the
appropriate outlet.
11. There is a danger of explosion if the battery is incorrectly replaced. Replace only with
the same or equivalent type recommended by the equipment manufacturer. Dispose
of used batteries according to local, state, regional, and federal regulations.
12. This system contains hazardous energy levels. To prevent injury, care must be taken
not to come in contact with any of the electrical circuitry contained inside this system.
Under any of the following conditions, unplug the Iomega StorCenter Pro from the wall
outlet and contact Iomega technical support:
The power cord or plug is damaged.
Liquid has been spilled into the Iomega StorCenter Pro.
The Iomega StorCenter Pro does not function properly when the operating instructions
are followed.
The Iomega StorCenter Pro was dropped or the cabinet is damaged.
| top of page |
Produktspezifikationen
| Marke: | Iomega |
| Kategorie: | Server |
| Modell: | StorCenter Pro NAS 150d Server |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Iomega StorCenter Pro NAS 150d Server benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Server Iomega
7 Juli 2024
28 August 2023
Bedienungsanleitung Server
- Server Acer
- Server Asus
- Server Gigabyte
- Server HP
- Server Medion
- Server Sony
- Server ZyXEL
- Server Buffalo
- Server Allnet
- Server Linksys
- Server Netgear
- Server Fantec
- Server Technics
- Server Abus
- Server Megasat
- Server Toshiba
- Server Lindy
- Server Dell
- Server Lenovo
- Server Tripp Lite
- Server TRENDnet
- Server Western Digital
- Server AVerMedia
- Server Veritas
- Server Black Box
- Server Supermicro
- Server SilverStone
- Server NEC
- Server Monacor
- Server Seagate
- Server Fujitsu
- Server Maxdata
- Server Revox
- Server Totolink
- Server Conceptronic
- Server D-Link
- Server QNAP
- Server Digitus
- Server LevelOne
- Server APC
- Server Cisco
- Server Freecom
- Server Synology
- Server Kramer
- Server Intellinet
- Server Eaton
- Server Hikvision
- Server FLIR
- Server ELAC
- Server Planet
- Server Asustor
- Server Blackmagic Design
- Server Dane Elec
- Server Digi
- Server Dual Bay
- Server EMC
- Server GeoVision
- Server Ibm
- Server In Win
- Server LaCie
- Server Provision ISR
- Server Quantum
- Server Sun
- Server AMX
- Server ACTi
- Server Vimar
- Server Siig
- Server Intel
- Server Moxa
- Server StarTech.com
- Server Smart-AVI
- Server Mobotix
- Server Sonnet
- Server SEH
- Server Gefen
- Server Avocent
- Server Atlantis Land
- Server Hanwha
- Server ATen
- Server KanexPro
- Server Axis
- Server Advantech
- Server HGST
- Server Kiloview
- Server B&B Electronics
- Server Extron
- Server Atlona
- Server Rocstor
- Server Raidsonic
- Server G-Technology
- Server Infortrend
- Server Areca
- Server Silex
- Server Promise Technology
- Server Matrox
- Server Origin Storage
- Server Ernitec
- Server EXSYS
- Server Raritan
- Server C2G
- Server Chenbro Micom
- Server Lantronix
- Server IStarUSA
- Server Valcom
- Server TAIDEN
- Server MvixUSA
- Server Opengear
- Server Mr. Signal
- Server NETSCOUT
Neueste Bedienungsanleitung für -Kategorien-
13 Oktober 2024
12 Oktober 2024
12 Oktober 2024
11 Oktober 2024
11 Oktober 2024
10 Oktober 2024
6 Oktober 2024
4 Oktober 2024
3 Oktober 2024
3 Oktober 2024