Intex 66963E Bedienungsanleitung

Intex Bett 66963E

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Intex 66963E (4 Seiten) in der Kategorie Bett. Dieser Bedienungsanleitung war für 18 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/4

151

(151) AP619A BUILT-IN ELECTRIC PUMP ENGLISH 4.875” X 7.25” 07/22/2010

151

(151) AP619A BUILT-IN ELECTRIC PUMP ENGLISH 4.875” X 7.25” 07/22/2010

READ AND SAVE THESE INSTRUCTIONS

Page 1

READ AND SAVE THESE INSTRUCTIONS

Page 2

PARTS REFERENCE

Part Descriptions:

1. AC line cord

2. Switch

3. Inflation mark ( )

4. Deflation mark ( )

5. Air passage & control

dial valve

6. Control dial

7. Cord compartment cover

8. Airbed

IMPORTANT SAFETY INSTRUCTIONS

READ AND FOLLOW ALL INSTRUCTIONS BEFORE USING THIS PRODUCT

INTEX®OWNER'S MANUAL

Built-in Fast-Fill™ Electric Pump

Model AP619A 110 – 120 V~ 60 Hz 0.9 A

SERVICING OF A DOUBLE-INSULATED PRODUCT:

In a double-insulated product, two systems of insulation are provided instead of grounding. No grounding

means is provided on a double-insulated product, nor should a means for grounding be added to the product.

Servicing of a double-insulated product requires extreme care and knowledge of the system, and should be

done only by qualified service personnel. Replacement parts for a double-insulated product must be identical

to those parts in the product.

A double-insulated product is marked with the words "DOUBLE INSULATION" or "DOUBLE INSULATED"

and with the symbol .

INSTRUCTIONS

General

•

This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric

shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the

outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this

safety feature.

•

No air pump maintenance is required.

151---R0-1107

•

NEVER PLACE AN INFANT TO SLEEP ON AIR MATTRESSES.

•For indoor household use only.

•Always supervise children near the airbed. Children must not be left unattended when using the airbed.

•Keep the storage bag away from babies and children. The storage bag is not a toy. When not in use,

fold the bag and put it away out of the reach of children.

•Do not stand on or jump on or use the airbed as a trampoline.

•Do not use on or near water. This is not a raft.

•Do not set up bed near stairs, doors, sharp edges or breakable objects.

•Make sure the area is flat, smooth, free of sharp objects that could puncture the bed and keep away

from ledges.

•Keep pets away from the airbed. Pets may puncture the surface of the bed.

•Avoid sleeping on the edge of the airbed. Edges produce less support than the middle of the bed.

•Do not operate air pump for more than 10 minutes at a time. Let pump cool at least 10 minutes between

uses.

•Unplug electrical power cord when not in use.

•Do not obstruct the air passage opening or insert any objects into the air passage opening.

•If the AC supply cord is damaged, it must be replaced by the manufacturer or its service agent in order

to avoid a hazard.

•To reduce the risk of fire or electric shock, do not use this fan with any solid-state speed control device.

•Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Do

not route cord under furniture or appliances. Arrange cord away from traffic area and where it will not

be tripped over.

FOLLOW THESE RULES AND ALL INSTRUCTIONS TO AVOID SUFFOCATION,

PROPERTY DAMAGE, ELECTRIC SHOCK, BURNS OR OTHER INJURY.

WARNING

INFLATION

1. Open line cord compartment cover. See Fig .(1)

2. Plug in the AC line cord into an AC electrical outlet. See Fig .(2)

3. Turn the control dial clockwise until arrow points to the inflation mark ( ). See

Fig .(3)

4. Press "I" to switch ON. See Fig .(4)

5. When the airbed is fully inflated to the desired firmness, press "O" to switch OFF. See

Fig .(5)

FIG (1) FIG (2)

220 – 240 V 110 – 120 V

√

FIG (5)FIG (4)

FIG (3)

Ma rke ting Ltd .

Lo ng Beac

h, CA 908 01- 144 0USA

cou ntr ies ofth eworldb yInt ex

Tra din gL td., unde rl icen se fromInte x

Trademarksuse din so me

200 4IntexRec rea tion Co rp.,

Made inChina/Fabr

ique en Chin e/H echo en China

NOTE: Drawings for illustration purpose only. May not reflect actual product. Not to scale.

•To reduce the risk of electric shock, do not expose to rain. Store indoors. Connect only to an outlet

provided with a ground fault circuit interrupting device.

•Do not use an extension cord with this fan.

CAUTION

151

(151) AP619A BUILT-IN ELECTRIC PUMP ENGLISH 4.875” X 7.25” 07/22/2010

151

(151) AP619A BUILT-IN ELECTRIC PUMP ENGLISH 4.875” X 7.25” 07/22/2010

READ AND SAVE THESE INSTRUCTIONS

Page 3

READ AND SAVE THESE INSTRUCTIONS

Page 4

6. Lie down on the airbed to test the firmness.

7. If the sleeping surface is too hard, adjust the firmness

by turning the control dial counterclockwise gradually

until air starts to exit through the air passage. See

Fig . Turn the control dial fully clockwise when the(6)

desired firmness is achieved. See Fig . If the airbed(7)

becomes too soft repeat step #3 thru #7 as necessary.

8. Disconnect the AC line cord from the wall socket,

place it inside the cord compartment and close the

cover.

FIG (6)

FIG (7)

Proper inflation of the airbed.

The ambient temperatures of air have an effect on the airbed internal pressure. At low

ambient temperature the air will contract within the airbed and the airbed will feel softer:

add air as necessary. At high ambient temperature the air within the airbed will expand

significantly and the airbed will become hard and may burst: release air to avoid damage

to the airbed or to soften the feel. expose the airbed to extreme temperatures (hotDo not

or cold).

Dimensions shown are approximate and will vary due to the vinyl temperature and the air

temperature.

In no event shall Intex, their authorized agents or employees be liable for damages

(such as pin holes) to the airbed caused by negligence, ordinary wear and tear,

abuse and carelessness, or external forces.

IMPORTANT NOTE

DEFLATION

1. Open line cord compartment cover. See Fig .(1)

2. Plug in the AC line cord into an AC electrical outlet. See Fig .(2)

3. Turn the control dial counterclockwise until arrow points to deflation mark ( ). See

Fig .(8)

4. Press "I" to switch ON. See Fig .(4)

5. When the airbed is completely deflated, begin rolling the airbed from the foot of the

airbed towards the head of the airbed where the pump is located. See Fig .(9)

6. When all air is removed from the airbed, press "O" to switch OFF. See Fig .(5)

7. Turn the control dial fully clockwise. See Fig .(10)

8. Disconnect the AC line cord from the wall socket, place it inside the cord compartment

and close the cover.

FIG (9)FIG (8)

Mar keti ngL td

Lon gB eac h,CA 908 01-1 440 USA

cou ntrie s

of the world by Intex

Trad ing Ltd .,und erlic ens efro mIntex

Trademarksused ins ome

2004 Inte xR

ecrea tion Cor p.,

Madein Chi na/F abriquee nChine/H ech oen Chin a

FIG (10)

INFLATION OPTION

1. If electrical power is not available then a conventional foot

or manually operated air pump can be connected to the

control dial valve for inflation. See Fig .(11)

2. Turn the control dial clockwise until arrow points to the

inflation mark ( ).

3. Insert air pump nozzle to the control dial valve to inflate the

airbed.

FIG (11)

Fill with cold air only.

IMPORTANT

STORAGE

1. Deflate the airbed following the "DEFLATION" instructions.

2. Turn the control dial counterclockwise until arrow points to deflation mark ( ). See

Fig .(8)

3. Make sure the airbed is clean and dry.

4. Lay bed flat with sleeping surface facing upwards and follow the folding steps on Figs

(12 - 16). Fold the airbed loosely and avoid sharp bends, corners and creases which can

damage the airbed.

INTEX

FIG (12) FIG (13) FIG (14)

FIG (15) FIG (16)

5. Turn the control dial fully clockwise. See Fig (10).

6. Place the airbed inside the storage bag and store in a dry, cool storage location.

Made in China/Fabriqué en Chine/Hecho en China/Hergestellt in China.

®™ Trademarks used in some countries of the world under license from/®™ Marques utilisées dans certains pays sous licence de/Marcas registradas

utilizadas en algunos países del mundo bajo licencia de/Warenzeichen verwendet in einigen Ländern der Welt in Lizenz von/Intex Marketing Ltd. to/à/a/an Intex

Trading Ltd., Intex Development Co. Ltd., G.P.O Box 28829, Hong Kong & Intex Recreation Corp., P.O. Box 1440, Long Beach, CA 90801 • Distributed in the

European Union by/Distribué dans l’Union Européenne par/Distribuido en la unión Europea por/Vertrieb in der Europäischen Union durch/Intex Trading B.V., P.O.

Box nr. 1075 – 4700 BB Roosendaal – The Netherlands Consumer Ser vice 1-800-234-6839

Produktspezifikationen

Marke:	Intex
Kategorie:	Bett
Modell:	66963E
Form:	Rechteckig
Breite:	- mm
Produktfarbe:	Weiß
Faltbar:	Nein
Verpackungsbreite:	413 mm
Verpackungstiefe:	457 mm
Verpackungshöhe:	203 mm
Paketgewicht:	10800 g
Typ:	Einzelbett
Länge (mm):	- mm
Integrierte Luftpumpe:	Ja
Empfohlene Altersgruppe:	Erwachsene
Matratze enthalten:	Ja
Sockelbreite:	- mm
Integriertes Kissen:	Nein
Aufbewahrungsbox:	Ja
Sockellänge:	- mm
Nachttischschubladen:	Nein
Lamellensockel enthalten:	Nein