Intermec EasyCoder PF2i Bedienungsanleitung
Intermec
Etikettendrucker
EasyCoder PF2i
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Intermec EasyCoder PF2i (14 Seiten) in der Kategorie Etikettendrucker. Dieser Bedienungsanleitung war für 6 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/14
3400, 4420, and 4440 Cutter
P/N 066391-001
User’s Manual
Intermec Technologies Corporation
6001 36th Avenue West
P.O. Box 4280
Everett, WA 98203-9280
U.S. service and technical support: 1-800-755-5505
U.S. media supplies ordering information: 1-800-227-9947
Canadian service and technical support: 1-800-688-7043
Canadian media supplies ordering information: 1-800-268-6936
Outside U.S. and Canada: Contact your local Intermec service supplier.
The information contained herein is proprietary and is provided solely for the purpose of allowing
customers to operate and/or service Intermec manufactured equipment and is not to be released,
reproduced, or used for any other purpose without written permission of Intermec.
Information and specifications in this manual are subject to change without notice.
 1998 by Intermec Technologies Corporation
All Rights Reserved
The word Intermec, the Intermec logo, JANUS, IRL, TRAKKER, Antares, Adara, Duratherm,
EZBuilder, Precision Print, PrintSet, Virtual Wedge, and CrossBar are either trademarks or
registered trademarks of Intermec Technologies Corporation. Throughout this manual, trademarked
names may be used. Rather than put a trademark ( or ) symbol in every occurrence of a
trademarked name, we state that we are using the names only in an editorial fashion, and to the
benefit of the trademark owner, with no intention of infringement.
Introduction to the Cutter
3
This manual explains how to install and clean the cutter on your 3400, 4420, or 4440
printer. It also explains how to enable the cutter using PrintSet.
Introduction to the Cutter
With the cutter on your 3400, 4420, or 4440 printer, you can cut media into
individual labels of the same or random lengths that are ready for use. The
cutter blade is capable of cutting a wide range of die cut roll, continuous roll, or
fanfold media; however, the cutter performs best with 7- to 10-mil thickness tag
stock.
The cutter is mounted externally on the printer and cannot be used in
conjunction with the self-strip/batch takeup option.
Note: If you use the cutter on adhesive backed materials, cut the liner between the
labels. Cutting through adhesive is not recommended. You will need to clean the cutter
every 10,000 cuts or when it fails to cut cleanly if you cut through adhesive backed
material.
Cutter Parts and Function
The following table describes the parts and function of the cutter and how they
connect to the printer.
Name Description
Mounting plate Attaches the cutter to the printer. The mountin
g
plate has a
sprin
g
mounted hin
g
e that allows the cutter to swin
g
down so
that media can be fed easily through the cutter.
Cutter cable Powers and sends commands from the main PCB to the cutter.
Cutter connector Connects the cutter cable to the main PCB.
Cutter cover Prevents fin
g
ers from comin
g
into contact with the cutter blade.
It opens easily for cleaning.
Cutter blade Cuts the media when the printer reaches the end of the label.
Thumbscrews Attach the mountin
g
plate to the cutter and the cutter to the
mounting plate.
Produktspezifikationen
| Marke: | Intermec |
| Kategorie: | Etikettendrucker |
| Modell: | EasyCoder PF2i |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Intermec EasyCoder PF2i benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Etikettendrucker Intermec
27 Juli 2024
21 Juli 2024
19 Dezember 2023
19 Dezember 2023
19 Dezember 2023
19 Dezember 2023
19 Dezember 2023
19 Dezember 2023
19 Dezember 2023
19 Dezember 2023
Bedienungsanleitung Etikettendrucker
- Etikettendrucker 3M
- Etikettendrucker Renkforce
- Etikettendrucker Seiko
- Etikettendrucker Toshiba
- Etikettendrucker Casio
- Etikettendrucker Citizen
- Etikettendrucker Olivetti
- Etikettendrucker Epson
- Etikettendrucker Honeywell
- Etikettendrucker Brother
- Etikettendrucker Leitz
- Etikettendrucker Phoenix
- Etikettendrucker Datamax-O'neil
- Etikettendrucker Dymo
- Etikettendrucker Primera
- Etikettendrucker SATO
- Etikettendrucker TSC
- Etikettendrucker Zebra
- Etikettendrucker Bixolon
- Etikettendrucker Datacard
- Etikettendrucker Esselte
- Etikettendrucker Nieaf-Smitt
- Etikettendrucker Toshiba TEC
- Etikettendrucker Panduit
- Etikettendrucker Brady
- Etikettendrucker Star Micronics
- Etikettendrucker Metapace
- Etikettendrucker Godex
- Etikettendrucker Start International
- Etikettendrucker Argox
- Etikettendrucker Dascom
- Etikettendrucker EC Line
- Etikettendrucker Tach-It
- Etikettendrucker Qoltec
- Etikettendrucker Qian
- Etikettendrucker SII
- Etikettendrucker POSline
- Etikettendrucker Kroy
- Etikettendrucker Labelmate
- Etikettendrucker DULA
- Etikettendrucker Colop
- Etikettendrucker Custom
Neueste Bedienungsanleitung für -Kategorien-
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
13 Oktober 2024
12 Oktober 2024
10 Oktober 2024
8 Oktober 2024
8 Oktober 2024
28 September 2024
22 September 2024