Intel Edison Kit for Arduino Bedienungsanleitung

Intel Nicht kategorisiert Edison Kit for Arduino

Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Intel Edison Kit for Arduino (32 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war fĂĽr 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/32
Intel® Edison Kit for Arduino*
Hardware Guide
December 2014
Revision 004
- Document Number: 331191 004
Notice: This document contains information on products in the design phase of development. The information here is subject to change without
notice. Do not finalize a design with this information.
INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR
OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVI DED IN INTEL’S TERMS AND
CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY, RELATING TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A
PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
A "Mission Critical Application" is any application in which failure of the Intel Product could result, directly or indirectly, in personal injury or death.
SHOULD YOU PURCHASE OR USE INTEL’S PRODUCTS FOR ANY SUCH MISSION CRITICAL APPLICATION, YOU SHALL INDEMNIFY AND HOLD INTEL
AND ITS SUBSIDIARIES, SUBCONTRACTORS AND AFFILIATES, AND THE DIRECTORS, OFFICERS, AND EMPLOYEES OF EACH, HARMLESS AGAINST
ALL CLAIMS COSTS, DAMAGES, AND EXPENSES AND REASONABLE ATTORNEYS' FEES ARISING OUT OF, DIRECTLY OR INDIRECTLY, ANY CLAIM OF
PRODUCT LIABILITY, PERSONAL INJURY, OR DEATH ARISING IN ANY WAY OUT OF SUCH MISSION CRITICAL APPLICATION, WHETHER OR NOT
INTEL OR ITS SUBCONTRACTOR WAS NEGLIGENT IN THE DESIGN, MANUFACTURE, OR WARNING OF THE INTEL PRODUCT OR ANY OF ITS PARTS.
Intel may make changes to specifications and product descriptions at any time, without notice. Designers must not rely on the absence or
characteristics of any features or instructions marked “reserved” or “undefined.” Intel reserves these for future definition and shall have no
responsibility whatsoever for conflicts or incompatibilities arising from future changes to them. The information here is subject to change without
notice. Do not finalize a design with this information.
Intel software products are copyrighted by and shall remain the property of Intel Corporation. Use, duplication, or disclosure is subject to
restrictions stated s Software License Agreement, or in the case of software delivered to the government, in accordance with the software in Intel’
license agreement as defined in FAR 52.227- 7013.
The products described in this document may contain design defects or errors known as errata which may cause the product to deviate from
published specifications. Current characterized errata are available on request.
The code names presented in this document are only for use by Intel to identify products, technologies, or services in development that have not
been made commercially available to the public, i.e., announced, launched, or shipped. They are not "commercial" names for products or services
and are not intended to function as trademarks.
Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing your product order.
Copies of documents which have an order number and are referenced in this document, or other Intel literature may be obtained by calling
1- - - . 800 548 4725 or by visiting Intel’s website at http://www.intel.com/design/literature.htm
Intel processor numbers are not a measure of performance. Processor numbers differentiate features within each processor family, not across
different processor families. See for details. http://www.intel.com/products/processor_number
Intel, the Intel logo, and Intel Atom are trademarks of Intel Corporation in the United States and other countries .
* Other brands and names may be claimed as the property of others.
Copyright © 2014 Intel Corporation. All rights reserved.
Intel® Edison Kit for Arduino*
Hardware Guide December 2014
2 1- Document Number: 33119 004
Contents
1 Introduction ....................................................................................................................................................................... 6
1.1 Software requirements ............................................................................................................................................................... 6
1.2 Terminology .................................................................................................................................................................................... 6
1.3 References ........................................................................................................................................................................................ 6
2 Product Overview ............................................................................................................................................................. 7
2.1 Shield pin GPIO mapping .......................................................................................................................................................... 8
2.2 Pin function multiplexing control (summary) .................................................................................................................. 9
2.3 Pin function multiplexing control (detailed) .................................................................................................................. 10
2.4 GPIO interrupt support ............................................................................................................................................................ 11
2.5 Miscellaneous GPIOs............................................................................................................................................................... 11
2.6 Pin direction and pullup control ......................................................................................................................................... 12
3 - High Level Functional Description ............................................................................................................................. 13
3.1 Intel® Edison kit for Arduino* header signal list ........................................................................................................... 14
3.2 Intel® Edison kit for Arduino* PWM swizzler ................................................................................................................. 15
3.3 Intel® Edison kit for Arduino* analog inputs .................................................................................................................. 16
3.4 Intel® Edison kit for Arduino* signal pullup resistors ................................................................................................ 16
3.5 Intel® Edison kit for Arduino* USB interface .................................................................................................................. 16
3.6 Intel® Edison kit for Arduino* power supply .................................................................................................................. 17
3.7 Intel® Edison kit for Arduino* expansion mechanicals ............................................................................................. 17
4 Powering the Intel® Edison kit for Arduino*................................................................................................................18
4.1 Boot voltage selection – DCIN signal ................................................................................................................................ 19
5 Batteries............................................................................................................................................................................ 20
6 Layout................................................................................................................................................................................ 21
6.1 Antenna keepout ........................................................................................................................................................................ 21
6.2 Layout SD card, I2S, SPI, I2C ................................................................................................................................................. 21
6.3 LEDs .................................................................................................................................................................................................. 22
7 Handling ...........................................................................................................................................................................23
8 Debug UART and Low- Power Sleep Mode ................................................................................................................ 24
9 Buttons.............................................................................................................................................................................. 25
9.1 Software recovery (FWR_RCVR and RCVR_MODE) .................................................................................................... 25
10 Digikey sources ............................................................................................................................................................... 26
11 Shield pin configuration............................................................................................................................................... 27
11.1 Configure IO5 as a GPIO input, with pullup resistor disabled ............................................................................... 27
11.2 Configure IO11 as a GPIO input, with pullup resistor disabled .................................................................................. 28
11.3 Configure IO7 a as GPIO input, with pullup resistor enabled ........................................................................... 28
11.4 Configure IO6 a as PWM output........................................................................................................................................ 29
11.5 Configure IO14 as an ADC input ....................................................................................................................................... 29
11.6 IO18/IO19 Configure Ifor 2C connectivity..................................................................................................................... 30
11.7 Configure connectivity IO10 through IO13 for SPI ..................................................................................................31
Intel® Edison Kit for Arduino*
December 2014 Hardware Guide
Document Number: 331191- 3 004


Produktspezifikationen

Marke: Intel
Kategorie: Nicht kategorisiert
Modell: Edison Kit for Arduino
Prozessortaktfrequenz: 500 MHz
WLAN: Ja
WLAN-Standards: 802.11a, 802.11b, 802.11g
Bluetooth: Ja
Bluetooth-Version: 4.0
Breite: 25 mm
Tiefe: 35.5 mm
Produkttyp: 11
Höhe: 3.9 mm
DC input Spannung: 3.15 - 4.5 V
Betriebstemperatur: 0 - 40 °C
Warentarifnummer (HS): 8471500150
Frequenzbereich: 2.4 - 5 GHz
Anzahl der USB-AnschlĂĽsse: 1
USB-Version: 2.0
Formfaktor: 25mm x 35.5mm
Prozessor: Intel Quark SoC X1000
Kompatible Speicherkarten: SD, SDHC
Ausgangsstrom: 100 mA
Ausgangsspannung: 1.8 V
Prozessor Lithografie: 22 nm
Prozessor-Paketgröße: 25mm x 35.5mm mm
64-Bit Computing: Nein
Prozessorsockel: 70-pin Hirose .4mm
Interner Speichertyp: LPDDR3
Eingebettete Optionen verfĂĽgbar: Nein
UnterstĂĽtzte Arbeitsspeicher: DDR3-SDRAM
Speicherkanäle: Zweikanalig
ECC: Nein
RAM-Speicher maximal: 4 GB
Flash-Speicher: 4096 MB
Anzahl serielle AnschlĂĽsse: 2
Warenklassifizierungssystem zur automatisierten Nachverfolgung (CCATS): 740.17B1
Maximaler interner Speicher, vom Prozessor unterstĂĽtzt: 4 GB
Eingebaute Grafikadapter: Nein
Speichertaktfrequenz: 800 MHz
Intel® AES New Instructions (Intel® AES-NI): Nein
Intel® Trusted-Execution-Technik: Ja
CPU Konfiguration (max): 1
Intel® Virtualisierungstechnik für direkte I/O (VT-d): Nein
Intel® Clear Video Technologie: Nein
Serielles Port via internem Header: Ja
Trusted Platform Module (TPM): Nein
ECC vom Prozessor unterstĂĽtzt: Nein
FSB Gleichwertigkeit: Nein
Intel® Anti-Theft Technologie (Intel® AT): Nein
Intel® Flex Memory Access: Nein
Intel® Dual Display Capable Technology: Nein
Intel® Rapid-Storage-Technik: Nein
Intel® Fast Memory Access: Nein
Intel® Matrix-Storage-Technik (Intel® MST): Nein
Intel HD-Audio-Technik: Nein
Intel® Active Management Technologie (Intel® AMT): Nein
Breite der Speicherschnittstelle: 32 Bit
Bluetooth Low Energy (BLE): Ja
Intel® vPro™ Platform Eligibility: Nein
Physical Address Extension (PAE): Ja
Audio-Kanäle: 1
Parallelles Port via internem Header: Nein
Audioanschlusstyp: I2S
Exportkontroll-Klassifizierungsnummer (ECCN): 5A992C
Back-to-BIOS Knopf: Nein
Motherboard ARK ID: 84571
Integriertes LAN: Nein
Konsumenten Infrarot Headers: Nein
Flash-Speichertyp: NAND
Marktsegment: Desktop
Status: Discontinued
Produktfamilie: Intel Edison
Letzte Ă„nderung: 63903513
Startdatum: Q3'14
Maximaler Speicher: 4 GB
Voraussichtliches Abbruchssdatum: 06/16/2017
Firewire unterstĂĽtzt: Nein
Intel® Quiet-System-Technik (QST): Nein
Produktreihe: Intel Edison kit
Geboren am: Q3'14
Produktbezeichnung: Intel Edison Kit for Arduino*
ARK ID: 84571
Ethernet/LAN: Nein
Intel® Remote Wake Technology (Intel® RWT): Nein
Intel® Remote-PC-Assist-Technik (RPAT): Nein
Intel® Quick-Resume-Technik: Nein
Intel® Client Initiated Remote Access (CIRA) Technologie: Nein
Intel® AC'97Technologie: Nein
Extended Life Program (XLP): Nein
Tiefe Halogenoptionen verfĂĽgbar: Nein
Packungsgröße: 25 x 35.5 mm
FSBs unterstĂĽtzt: N/A
Mikrocontroller-Modell: Intel® Quark
Mikrocontroller Frequenz: 100 MHz
Integriertes WLAN: Yes, 802.11n
DC-Eingang fähig: Nein
Erfordert einen Prozessor mit Intel Graphics Technology: Nein

Brauchst du Hilfe?

Wenn Sie Hilfe mit Intel Edison Kit for Arduino benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Intel

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung fĂĽr -Kategorien-