Intel D102GGC2 Bedienungsanleitung
Intel
Hauptplatine
D102GGC2
Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Intel D102GGC2 (64 Seiten) in der Kategorie Hauptplatine. Dieser Bedienungsanleitung war fĂĽr 13 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/64
Intel
Intel
Intel
IntelIntel® Desktop Board D102GGC2
Desktop Board D102GGC2
Desktop Board D102GGC2
Desktop Board D102GGC2 Desktop Board D102GGC2
Product Guide
Product Guide
Product Guide
Product Guide Product Guide
Order Number: D47985-002
Revision History
Revision Revision History Date
-001 First release of the Intel® Desktop Board D102GGC2 Product Guide February 2006
-002 Second release of the Intel Desktop Board D102GGC2 Product Guide July 2006
If an FCC declaration of conformity marking is present on the board, the following statement applies:
FCC Declaration of Conformity
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
For questions related to the EMC performance of this product, contact:
Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124,
1-800-628-8686
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit other than the one to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications to the equipment not expressly approved by Intel Corporation could void the user’s authority to
operate the equipment.
Tested to comply with FCC standards for home or office use.
Canadian Department of Communications Compliance Statement
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the
Radio Interference Regulations of the Canadian Department of Communications.
Le présent appareil numerique német pas de bruits radioélectriques dépassant les limites applicables aux appareils
numériques de la classe B prescrites dans le Réglement sur le broullage radioélectrique édicté par le ministére des
Communications du Canada.
Disclaimer
Information in this document is provided in connection with Intel® products. No license, express or implied, by estoppel or
otherwise, to any intellectual property rights is granted by this document. Except as provided in Intel’s Terms and Conditions
of Sale for such products, Intel assumes no liability whatsoever, and Intel disclaims any express or implied warranty, relating
to sale and/or use of Intel products including liability or warranties relating to fitness for a particular purpose, merchantability,
or infringement of any patent, copyright or other intellectual property right. Intel products are not intended for use in medical,
life saving, or life sustaining applications. Intel may make changes to specifications and product descriptions at any time,
without notice.
Desktop Board D102GGC2 may contain design defects or errors known as errata which may cause the product to deviate
from published specifications. Current characterized errata are available on request.
Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing your product
order.
Copies of documents which have an ordering number and are referenced in this document, or other Intel literature, may be
obtained from Intel Corporation by going to the World Wide Web site at: http://www.intel.com/ or by calling
1-800-548-4725.
Intel, the Intel logo, Pentium, and Celeron are registered trademarks of Intel Corporation or its subsidiaries in the United
States and other countries.
* Other names and brands may be claimed as the property of others.
Copyright © 2006, Intel Corporation. All rights reserved.
iii
Preface
This Product Guide gives information about board layout, component installation, and regulatory
requirements for Intel® Desktop Board D102GGC2.
Intended Audience
The Product Guide is intended for technically qualified personnel. It is not intended for general
audiences.
Intended Uses
All Intel desktop boards are evaluated as Information Technology Equipment (I.T.E.) for use in
personal computers (PC) for installation in homes, offices, schools, computer rooms, and similar
locations. The suitability of this product for other PC or embedded non-PC applications or other
environments, such as medical, industrial, alarm systems, test equipment, etc. may not be supported
without further evaluation by Intel.
Document Organization
The chapters in this Product Guide are arranged as follows:
1 Desktop Board Features: a summary of product features
2 Installing and Replacing Desktop Board Components: instructions on how to install the
desktop board and other hardware components
3 Updating the BIOS: information about how to update the BIOS
A Error Messages and Indicators: information about BIOS error messages and beep codes
B Regulatory Compliance: safety and EMC regulations, product certification
Conventions
The following conventions are used in this manual:
CAUTION
Cautions warn the user about how to prevent damage to hardware or loss of data.
NOTE
Notes call attention to important information.
Produktspezifikationen
Marke: | Intel |
Kategorie: | Hauptplatine |
Modell: | D102GGC2 |
Breite: | 243.84 mm |
Tiefe: | 218.44 mm |
Energiequelle: | ATX |
Kopfhörerausgänge: | 1 |
Anzahl USB 2.0 AnschlĂĽsse: | 4 |
Anzahl Ethernet-LAN-AnschlĂĽsse (RJ-45): | 1 |
Audio Kanäle: | - Kanäle |
Mikrofon-Eingang: | Ja |
Kompatible Betriebssysteme: | Microsoft Windows XP/2000 |
Prozessorsockel: | LGA 775 (Socket T) |
Anzahl VGA (D-Sub) AnschlĂĽsse: | 1 |
Motherboardformfaktor: | micro ATX |
Anzahl der Speichersteckplätze: | 2 |
UnterstĂĽtzte Arbeitsspeichergeschwindigkeit: | 400,533 MHz |
RAM-Speicher maximal: | 2 GB |
Parallele Verarbeitungstechnologie: | Nicht unterstĂĽtzt |
Anzahl PS/2 AnschlĂĽsse: | 2 |
ATX Stromstecker (24-pol.): | Ja |
Anzahl USB 2.0 Schnittstellen: | 4 |
Chassis Intrusion Stecker: | Ja |
Zahl der parallelen ATA Stecker: | 2 |
Anzahl serielle AnschlĂĽsse: | 1 |
Eingebaute Grafikadapter: | Nein |
PCI-Express x16-Slots: | 1 |
PCI-Express x1-Slots: | 1 |
PCI-Slots: | 2 |
Anzahl ParallelanschlĂĽsse: | 1 |
Netzwerkfunktionen: | Schnelles Ethernet |
SATA AnschlĂĽsse: | 4 |
Diskettenlaufwerkstecker: | Ja |
Grafikcontroller: | ATI Radeon Xpress 200 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Intel D102GGC2 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Hauptplatine Intel
15 August 2024
11 August 2024
11 August 2024
9 August 2024
7 August 2024
6 August 2024
28 Mai 2024
8 Juni 2023
8 Juni 2023
Bedienungsanleitung Hauptplatine
- Hauptplatine Asus
- Hauptplatine Gigabyte
- Hauptplatine Sharkoon
- Hauptplatine MSI
- Hauptplatine Supermicro
- Hauptplatine NZXT
- Hauptplatine Asrock
- Hauptplatine ECS
- Hauptplatine EPoX
- Hauptplatine Evga
- Hauptplatine Abit
- Hauptplatine Elitegroup
- Hauptplatine Foxconn
- Hauptplatine Biostar
Neueste Bedienungsanleitung fĂĽr -Kategorien-
15 Oktober 2024
7 Oktober 2024
5 Oktober 2024
4 Oktober 2024
4 Oktober 2024
2 Oktober 2024
27 September 2024
26 September 2024
24 September 2024
22 September 2024