Inovonics EN7017 Bedienungsanleitung

Inovonics Sicherheitskamera EN7017

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Inovonics EN7017 (5 Seiten) in der Kategorie Sicherheitskamera. Dieser Bedienungsanleitung war für 13 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/5
EN7017 Survey Kit and App Installation
and Site Survey Instructions
Use a mini USB charging cable and any standard USB charger to fully
charge the survey receiver. The LED will light red while charging, and
turn off when fully charged.
3. Download and open the Site Survey App by Inovonics.
Select the Inovonics device that matches the MAC add the ress on
back of your survey receiver to pair it with the app. Once paired,
the receiver LED will light green.
If located somewhere other than North America, select
your frequency band.
•Survey kit carrying case.
•EN4017SK survey receiver.
•EN1223SK pendant survey
transmitter.
•Mini USB charging cable.
Use a pen or a paper clip to move the switch up to activate the
survey receiver battery. The survey receiver battery can remain
activated indefi nitely, and once activated, the survey receiver LED
will blink green until paired.
Install the Survey Kit and App
02.02.17 06818B © Inovonics, 2017 - www.inovonics.com
Press the pendant survey transmitter activation button;
the LED will fl ash red.
Go to the display screen.
Enter the TXID found on the back of the pendant survey
transmitter to pair it with the app. Once paired,
the signal strength needles will begin to move, indicating
you have successfully completed setup.
02.02.17 06818B © Inovonics, 2017 - www.inovonics.com
Perform a Site Survey
Take the survey receiver and your mobile device to the
fi rst place you plan to install a transmitter.
Place the activated pendant survey transmitter where you plan to
install the Inovonics receiver.
If the average signal strength is green but the current signal
strength dips into the red, you may need a repeater; if the average
and current signal strength are red you will need a repeater.
Look at the app display. If the signal strength is green,
no repeater is needed.
Repeat steps 2 through 5 for each transmitter to be
installed.
If a repeater is needed, walk from the installation point back
towards the pendant survey transmitter. When the average and
current signal strength are consistently green, this is the best
location to place a repeater.
EN1223SK pendant
survey transmitter
Mobile device with
survey app
EN1223SK pendant
survey transmitter
Mobile device with
survey app
EN1223SK pendant
survey transmitter
Mobile device with
survey app
EN1223SK pendant
survey transmitter
Mobile device with
survey app
02.02.17 06818B © Inovonics, 2017 - www.inovonics.com

Produktspezifikationen

Marke: Inovonics
Kategorie: Sicherheitskamera
Modell: EN7017

Brauchst du Hilfe?

Wenn Sie Hilfe mit Inovonics EN7017 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Sicherheitskamera Inovonics

Inovonics

Inovonics EN7017 Bedienungsanleitung

31 Januar 2024

Bedienungsanleitung Sicherheitskamera

Neueste Bedienungsanleitung für -Kategorien-

Speco Technologies

Speco Technologies O2PTZ34D5W Bedienungsanleitung

14 August 2024
ZKTeco

ZKTeco BL-34F26L Bedienungsanleitung

11 August 2024
Moxa

Moxa VPort 26 Bedienungsanleitung

27 Juni 2024
Moxa

Moxa VPort 36 Bedienungsanleitung

27 Juni 2024
Moxa

Moxa VPort 16-M12-CAM3L5436N Bedienungsanleitung

27 Juni 2024
Moxa

Moxa VPort 16-M12-CAM3L54160N Bedienungsanleitung

27 Juni 2024
Moxa

Moxa VPort P06 Bedienungsanleitung

27 Juni 2024
Moxa

Moxa VPORT P06-1MP-M12-CAM80 Bedienungsanleitung

27 Juni 2024
Moxa

Moxa VPort 16-DO-M12-CAM3L5436N Bedienungsanleitung

27 Juni 2024
Moxa

Moxa VPort 26A-1MP Bedienungsanleitung

27 Juni 2024