Ikan OTT-CONTROLLER Bedienungsanleitung

Ikan Regeln OTT-CONTROLLER

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung fĂŒr Ikan OTT-CONTROLLER (14 Seiten) in der Kategorie Regeln. Dieser Bedienungsanleitung war fĂŒr 22 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/14
OTT-CONTROLLER
Manual
OTTICA IP PTZ Camera Controller VISCA, ONVIF, PELCO
www.ikancorp.com sales@ikancorp.com
- 2 -
1. What is the function of CAM NUM when adding a network device?
CAM NUM will be associated and bound with the currently entered IP and port information.
It will quickly switch to the CAM NUM bound device when adding a device with the “CAM”
button.
2. How do I enter an IP address?
The camera controller doesn’t have a “.” button, so please enter the IP address with four
segments.
Take the IP address 192.168.0.1 for example. It will automatically jump to next segment when
ïŹnished inputting a segment with three numbers, 192 and 168; but after inputting a segment
with only one number, 0, you must move the joystick rightward to switch over to the next
segment to continue inputting.
3. How do I clear while in input mode?
Move the joystick leftward to clear the input information.
4. The home page of each mode refers to the displayed page when the controller
initialization is complete.
In IP VISCA and ONVIF Mode, if you see the prompts of “Visca!” and “Onvif!”, the IP
address displayed on the screen is local IP address of the controller. While the prompts of
“Visca:” and “Onvif:” are shown on the page, the IP address displayed on-screen belongs to
the connected device.
Precautions
- 3 -
Precautions 2
1. Product Overview 4
1.1 Product Features 4
1.2 Wiring Diagram 4
1.3 Technical SpeciïŹcations 5
2. Function Description 5
2.1 Button Description 5
2.2 Rocker Switch and Knob 7
2.3 Joystick Control 7
2.4 Terminal Description of Back Panel Interfaces 8
3. Local Settings (SETUP) 8
3.1 Basic Settings 8
3.2 VISCA & IP VISCA Mode Shared Setting 9
3.3 IP VISCA Mode Setting 9
3.4 VISCA Mode Setting 9
3.5 PELCO Mode Setting 9
3.6 ONVIF Mode Setting 10
4. Connection and Control 10
4.1 Connection and Control in ONVIF Mode 10
4.2 Connection and Control in IP VISCA Mode 11
4.3 Control in VISCA & PELCO Mode 11
5. Web Page ConïŹguration 11
5.1 Home Page 11
5.2 LAN Settings 12
5.3 Upgrade 13
5.4 Restore Factory 13
5.5 Reboot 13
Support, Warranty, Copyright 14
Table of Contents


Produktspezifikationen

Marke: Ikan
Kategorie: Regeln
Modell: OTT-CONTROLLER

Brauchst du Hilfe?

Wenn Sie Hilfe mit Ikan OTT-CONTROLLER benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Regeln Ikan

Bedienungsanleitung Regeln

Neueste Bedienungsanleitung fĂŒr -Kategorien-