Iiyama WP II960A Bedienungsanleitung

Iiyama Kabelloser Presenter WP II960A

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Iiyama WP II960A (8 Seiten) in der Kategorie Kabelloser Presenter. Dieser Bedienungsanleitung war für 20 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/8

ScreenBeam®

960

ScreenBeam 960

Wireless Display Receiver

Quick Start Guide

This Quick Start Guide provides the instructions on how to install ScreenBeam 960

receiver, connect client devices, and setup for deployment. Refer to the support

website for the full deployment guide, latest updates, and best practices.

Before Beginning Deployment

Before deploying ScreenBeam products, check for the latest ﬁrmware, release

documentation and tech tips.

zFor ScreenBeam receiver’s deployment guide, ﬁrmware upgrades, and release

notes, go to: https://support.screenbeam.com/960

zFor Miracast™ or native macOS/iOS wireless display connection tutorial, go to:

https://www.screenbeam.com/setup

zFor ScreenBeam Central Management System (CMS) software, go to:

https://support.screenbeam.com/cms

zFor Open Source information, go to: https://opensource.screenbeam.com

Package Contents

zScreenBeam 960 receiver

zPower supply

zHDMI cable

zQuick Start Guide (this document)

zRegulatory documents

Documentation

For FAQs, troubleshooting tips

and support, visit:

https://support.screenbeam.com

Need Help?

To open a ticket for support, visit:

https://support.screenbeam.com/ticket

1 | screenbeam.com

quick start guide

Requirements

Minimum System Requirements

The latest Windows 7 and later, macOS 10.10 and later, iOS 9

and later, or Android 4.2 or later with Miracast; refer to online

support for the latest list.

Network Requirements

Refer to the online support for the most recent information.

Note: Additional network conﬁguration is not required for

Wi-Fi Miracast enabled device to connect. Verify Group

Policy and ﬁrewall settings to allow Wi-Fi Direct groups or

hosted networks.

Setup Requirements

zScreenBeam 960 receiver

zDisplay with an available HDMI input

zAn ethernet network connection with DHCP IP or a

Wi-Fi router

Note: This is used for wireless display over LAN and

management.

zScreenBeam wireless display app

Note: Not required for Windows 10/8.1, macOS, and iOS

with native screen mirroring support.

2 | screenbeam.com

A. Connect Receiver to Display

Figure 1 Connection guide

1. Place the receiver next to the display.

2. Connect one end of the provided HDMI cable to the

receiver’s HDMI port and the other end to an available HDMI

port on the display.

Note: For VGA connection details, refer to the

ScreenBeam 960 User Guide.

3. Optional: If the display has USB HID touch capability, insert

the HID USB connector into the USB port of the receiver.

(USB Cable is not included)

4. Connect the receiver’s power supply to the receiver’s power

port, then to an electrical outlet.

5. Optional: Connect one end of the Ethernet cable to the

receiver’s Ethernet port and connect the other end to

the network switch with DHCP IP. (Ethernet cable is not

included).

Note: Refer to section B for more information on setting

up a network connection.

6. Turn on the display and switch to the corresponding input

connected to the receiver.

7. Wait about 30 seconds, then verify the Ready to Connect

screen appears on the display.

ScreenBeam

960

screenbeam.com | 3

B. Set Up Network Connection

ScreenBeam requires network connection for various

purposes; Wireless display over LAN support and management

of the receiver. ScreenBeam can be connected to the network

via wired or Wi-Fi connection.

Wired Connection

If ScreenBeam is connected to a DHCP-enabled network, the

Ready to Connect screen will show the IP address assigned

to the ScreenBeam.

Wi-Fi connection or Static IP address

This requires additional steps to conﬁgure the receiver with the

proper network information. Detailed instructions are available

online at . For initial testing https://support.screenbeam.com

purpose, we recommend using wired network connection with

DHCP-enabled.

C. Connect Client Device

This section provides instructions on how to connect using

native screen mirroring from the most common operating

systems. Refer to www.screenbeam.com/setup for details and

instructions for all other operating systems.

Note: The web page will display the instructions based

on the client-device OS. Use the links at the bottom of the

web page to select OS-speciﬁc instructions.

Connect using Windows 10/8.1

To connect using Windows 10, follow the instructions below.

Steps for Windows 8.1 may vary.

1. Open the action center by swiping from the right side of

the touchscreen selecting the speech bubble icon in the or

lower right corner of the screen. (Windows key + K)

2. Select and wait for available receiver(s) to appear. Connect

3. Select the receiver name that matches the receiver name

shown on the screen.Ready to Connect

4. Enter in the PIN code if required. If the PIN code is not

displayed, try the hidden PIN “12345670” or contact the

admin for ScreenBeam.

5. Optional: Select the box Allow mouse, keyboard, touch,

and pen input from this device if the display panel/

projector supports interactive touch. Refer to section F for

more details on using interactive touch.

6. Optional: Select and choose Change projection mode

Extend Duplicate or if desired.

Note: To disconnect or change the projection mode,

return to the menu.Connect

Produktspezifikationen

Marke:	Iiyama
Kategorie:	Kabelloser Presenter
Modell:	WP II960A
WLAN-Standards:	802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Breite:	168 mm
Tiefe:	168 mm
AC-Netzadapter:	Ja
Produktfarbe:	Schwarz
Höhe:	34.5 mm
Kopfhörerausgänge:	1
Betriebstemperatur:	0 - 40 °C
Relative Luftfeuchtigkeit in Betrieb:	10 - 85 %
Eingebauter Ethernet-Anschluss:	Ja
Zertifizierung:	CE, RED
Stromverbrauch (Standardbetrieb):	5 W
Anzahl Ethernet-LAN-Anschlüsse (RJ-45):	1
Warentarifnummer (HS):	85176990
Ethernet LAN Datentransferraten:	10, 100 Mbit/s
LED-Anzeigen:	Ja
Temperaturbereich bei Lagerung:	0 - 70 °C
Luftfeuchtigkeit bei Lagerung:	5 - 90 %
Unterstützt Windows-Betriebssysteme:	Ja
Mac-Kompatibilität:	Ja
Miracast:	Ja
Frequenzband:	2.4 / 5 GHz
Schnittstelle:	HDMI + VGA (D-Sub)
Formfaktor:	Desktop
Top WLAN-Standard:	Wi-Fi 5 (802.11ac)
Nachhaltigkeitszertifikate:	RoHS
Verkabelungstechnologie:	10/100Base-T(X)
Unterstützte Linux-Betriebssysteme:	Ja
Anzahl der HDMI-Ausgänge:	1
Anzahl HDMI-Eingangsschnittstellen:	1
Maximale Auflösung (HDMI):	1920 x 1080 Pixel