Iiyama WP D001HU Bedienungsanleitung

Iiyama Netzwerkkarte / Adapter WP D001HU

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Iiyama WP D001HU (2 Seiten) in der Kategorie Netzwerkkarte / Adapter. Dieser Bedienungsanleitung war für 14 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/2

M259A12

WIRELESS PRESENTATION

HDMI DONGLE

WP D001HU

User Manual

CHECKING THE CONTENTS OF THE PACKAGE

 Wireless presentation HDMI Dongle



 User Manual (this document)



NAME OF EACH PART

SPECIFICATIONS

Button

Indicator HDMI cable

USB cable

DEVICE REQUIREMENTS



Android receiver

- ESharePro app is installed and activated.

(Please refer to the online UM for detail support

models.)

Network : 2.4G/5G Wi-Fi hotspot or LAN or WLAN



Sender

- Windows PC : Win7 / Win8 / Win10

- MacBook : Mac OS 9.0 or later

- Chrome Book

- Linux

- Other devices with HDMI output available

Model Name WP D001HU

Video outputs HDMI 1.4, comply with HDCP

Frame Rate Up to 60 fps depending on environment (FHD)

Output resolution 720x480, 720x576, 1280x720,1920x1080(1080P)

Input resolution

Video: 480p, 576p, 720p, 1080p

PC timing: 640x480, 800x600, 1024x768, 1280x720,

1920x1080

Audio Stereo, Radio quality 16bits 48kHz

Wireless IEEE 802.11ac, 5GHz

IEEE 802.11n, 2.4GHz

Data rate wireless Up to 867Mbps

Authentication protocol WPA2(WPA2-PSK (Pre-Shared key) / WPA2-

Enterprise)

Security(encryption) WPA2

Support platform Windows, MAC10.15, Chrome

Any OS supports HDMI standard 1.4

Reach Max. 15m

Cable USB cable (type A), HDMI cable

LED 1 LED

Power Supply DC 5V, 0.65A

Power Consumption 3.25W

Temperature range

Operating: 0°C to +40°C (+32°F to +104°F)

Storage: -10°C to +60°C (+14°F to +140°F)

Humidity

Ope rating: 10% to 80 % relativ e humi dity, n on-

condensing

Storage: 5% to 90% relative humidity, non-

condensing



SAFETY PRECAUTIONS





Before using and operating this device, please read thoroughly and comply

with the following precautions in order to prevent accidents or mal-operations.



Do not charge or use the device in dusty or wet conditions, to prevent internal

circuit failure.



Keep the device away from heat sources such as an electric heater.



This device and its parts may contain some small components, so keep the

product out of reach of children to prevent accidents.



This device is not water-resistant, please keep it dry.



Please contact professional service personnel for maintenance services.



Do not insert any sharp or pointed object into the device.



Prevent the device from falls and collisions with other objects, which may

cause damages.



There are ventilation holes on back cover, do not spray water to it or use

damp cloth for cleaning.



Please call professional personnel for maintenance service.

Frequency Range Output Power (Max.)

2412 to 2472 MHz 15.88 dBm

5180 to 5240 MHz 13.26 dBm

5745 to 5825 MHz 13.22 dBm

RF&POWER



PAIRING SHARE SCREEN



Pair with Android Receiver

Requirements :

2.4G/5G Wi-Fi hotspot is enabled on the Android

receiver. (Please refer to the online UM for detail

support models.)

1. Plug the dongle into the USB port on the Android

receiver, and the dongle will pair with the receiver

automatically.

Please don't unplug the dongle while

pairing.

2. "Saved!" is displayed when the dongle is paired.

Tap the [OK] button to ﬁ nish.

3. Unplug the dongle from USB port on the Android

receiver.

NOTE

Requirements :

Android receiver is connected with LAN or WLAN.

1. Plug the dongle into the USB port on the Android

receiver, and enter the Wi-Fi SSID and password

of your oﬃ ce to associated with the receiver in the

pairing dialog.

Recommend that you write down your Wi-

Fi SSID and password. If the input is wrong,

the receiver and dongle cannot be paired.

2. Check if the network information is entered

correctly, and then tap the [SAVE] button.

3. "Saved!" is displayed when the dongle is paired.

Tap the [OK] button to ﬁ nish.

4. Unplug the dongle from USB port on the Android

receiver.

NOTE



Indicator Status in Sharing

Blinking blue : The dongle is connecting

Permanent blue : The dongle is connected

Blinking red : The dongle fails to connect with the receiver



Share screen with Android Receiver

Plug both USB and HDMI cables of the paired the dongle into the sender, the dongle indicator will blink in blue.

And wait for the indicator turns permanent blue.

2. Press the button on the dongle to start screen sharing. And press the button on the dongle again to stop

screen sharing.



Extend Screen

On the sender's operating system:

1) Go to the display settings.

2) Set the display mode as extended display

 

Hereby, iiyama Corporation declares that the radio equipment Type WP D001HU is in compliance with

Directive 2014/53/EU.

The full text of the EU declaration of conformity is available at the following internet

address: www.iiyama.com

CE Conformity for European Countries

This Wireless Presentation HDMI Dongle complies with the requirements of the EC/EU Directive 2014/53/EU

“Radio Equipment Directive”, and 2011/65/EU “RoHS Directive”.

The electro-magnetic susceptibility has gives correct operationbeen chosen at a level that in residential

areas, business and light industrial premises and small-scale enterprises, inside as well as outside of the

buildings. All places of operation are characterised by their connection to the public low voltage power supply

system.

IIYAMA CORPORATION: Wijkermeerstraat 8, 2131 HA Hoofddorp, The Netherlands

Following information is only for EU-member states

The mark shown to the right is in compliance with the Waste Electrical and Electronic

Equipment Directive 2012/19/EU (WEEE). The full text of the EU declaration of conformity is

available at the following internet address: www.iiyama.com

The mark indicates the requirement NOT to dispose the equipment as unsorted municipal

waste, but use the return and collection systems according to local law.



Indicator Status in Pairing

Blinking blue : The dongle is starting up or pairing

Permanent blue : The dongle is paired successfully

Blinking red : The dongle fails to pair with the receiver

Produktspezifikationen

Marke:	Iiyama
Kategorie:	Netzwerkkarte / Adapter
Modell:	WP D001HU
WLAN:	Ja
WLAN-Standards:	Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Produkttyp:	HDMI WLAN-Adapter
Produktfarbe:	Schwarz
Übertragungstechnik:	Kabelgebunden
Betriebstemperatur:	0 - 40 °C
Relative Luftfeuchtigkeit in Betrieb:	10 - 80 %
Netzstandard:	IEEE 802.11ac, IEEE 802.11n
Unterstützte Sicherheitsalgorithmen:	WPA2, WPA2-Enterprise, WPA2-PSK
Zertifizierung:	CE
Stromverbrauch (Standardbetrieb):	2.5 W
Warentarifnummer (HS):	85176990
Maximale Datenübertragungsrate:	867 Mbit/s
Eingebaut:	Nein
Temperaturbereich bei Lagerung:	-10 - 60 °C
Luftfeuchtigkeit bei Lagerung:	5 - 90 %
Unterstützt Windows-Betriebssysteme:	Ja
Unterstützt Mac-Betriebssysteme:	Ja
Schnittstelle:	WLAN
Unterstützung anderer Betriebsysteme:	ChromeOS
Nachhaltigkeitszertifikate:	RoHS
WLAN-Band:	Dual-Band (2,4 GHz/5 GHz)
Hostschnittstelle:	HDMI
Maximaler Arbeitsabstand:	15 m